In this video I show you how to repair the Korg 01/Wfd, all tacktile switches and the backlight EL Foil I will replace in this video. Have fun soldering.
Hey, great video! I've been inside my 01/W numerous times to replace broken keys and to lubricate the keys, but I needed to install a new backlight this time. This video was really helpful to tick off the various boards and sections that needed to be removed. I got everything removed, backlight installed, and everything back together and working with no screws remaining! Thanks for doing the work and posting the video.
FINALLY!!, after years of looking at a almost black LCD screen, i finally decided to replace it with a LED,.. by myself!!.. and thnks to Arnold and his channel here, i succeeded!! :D:D
Great job, and tutorial. I've taken all of my Korgs apart many times for fixing, maintenance, swapping things, etc, in the course of over 30 years. But i never bothered to take them apart just because of the LCD backlight. Never bothered me at all. It's a bit harder to read, but not enough for me to merit stripping the whole thing apart just to change it. I admire your persistence 😃
I followed your video on replacing a display in a Wavestation and managed to fix mine. I'm going to attempt to insert a new El Foil in a 1993 Korg i3 and wondered if the procedure would be the same as the 01/Wfd. Did you fit the new foil next to the glass display or behind the old foil? Thanks for all your help. Great videos.
Hello and thanks for uploading this tutorial. I have a 01W FD and the backlight is dead. Can you suggest where to buy the foil for backlighting? I also have to replace the backup battery. Can you please tell if it is soldered to the mainboard or just insterted as on computer motherboards? is it a standard CR2032? Many thanks. Kind regards
The backlight you can buy at backlight4you.com. the battery is not soldered but you can replace it just by clicking the old one out and push in a new one. Have fun
@@arnoldsretrokeys189 Replaced the battery, it was very easy, thank you. But about display I'm absolutely not able ( I have no soldering experience) and Korg repair center won't do it.
Arnold thanks for uploading this video, i'm also trying to replace the backlight on my Korg 01wfd and t's been the best step by step video i've watched on youtube so far. I just have a couple question; why did you slide in the new foil over the old one? Can you take the old one out and put in the new one? Which way is better? Thanks in advanced. Blessings!!!
Hi Pianoman Thanks for the kind words. please dont take out the old foil begouse you will ruin your display, just desolder the two pins and cut them off tight to the display and slide the new foil in front of the old foil, it will fit perfect and than solder the two pins back on the display board. Happy soldering.
Hi. First, thanks for this video. I’m trying to replace my LED and LCD. The old one has two leads, the one I bought doesn’t. The only cable is the flat ribbon, and I wonder if they still need the others(?) It’s my first time doing this and I’m not ver my handy but decided t give it a try after watching this video. Any thoughts?
Podrás tocar por favor los sonidos de programacion y combinación de bancos a y b en tu teclado korg 01w Tóquenlos para ver que sonidos traen, que sean uno por uno
hello my synthesizer i30 works I put the sound of a1 piano and play i don't change the sound. program sound itself is changing and styles too problem in touchsrenn or display?i want know help me pls thanks
Hi, nice video! What I didn't see is if you replaced the foil or if you slided the new one over the old one... I have to replace two of them in my D50 and SY77...
Boy, Korg sure had some crappy design engineering back when this was produced. The first thing that's going to go on this keyboard and they make it the hardest thing to get at. I wish they would have designed it so you could get at it from the front without going through all the rigmarole in the back 🙂
It maybe a laborious process, but Korg's design on these synths is anything but "crappy". Other brands are exactly the same for these types of synths. The M1, T series, 01/W series, Wavestation, and Trinity where the pinnacle of Korg's design and built. They are almost virtually indestructible.
Hi Arnold!! Thanks for the video. Would you, please, be so kind to tell me where I can get the replacement light and the specs of it? One more time, thank you so much.
I too have a 01/Wfd, and I've written all my songs on it, but I don't know how to export (or transfer) all the MIDI information (from the sequencer) into my laptop. Do you have any experience in this?
Thats correct but you dont need to take out the old foil, just slide the new foil in front of the old one. The old one is only glued on the back side. Please dont detach the frame begouse you will ruin the displey.
@@arnoldsretrokeys189 Ik woon ook in Nederland 😁 Ooit heb ik al eens lopen zoeken naar een nieuw scherm etc etc, maar waar kan ik zon scherm nu beste bestellen?
@@RichardDenRooyen1973 Je kan het display bestellen bij .synth-parts.com, dat is in Duitsland. Hij verzend gewoon naar Nederland. Er zit ook een SMD bij die je moet vervangen zoals je kan zien in het filmpje, ook zit er een duidelijke beschrijving bij. Wel prijzig euro 77,50.
Als je alleen de Ell Foil wilt vervangen dan heb ik deze hier nog wel liggen voor je. En als je display defect is dan heb ik deze ook eventueel wel voor je, inclusief nieuwe Ell Foil voor een redelijk prijsje. Alvast succes met de reparatie 👍👍
Hey, great video! I've been inside my 01/W numerous times to replace broken keys and to lubricate the keys, but I needed to install a new backlight this time. This video was really helpful to tick off the various boards and sections that needed to be removed. I got everything removed, backlight installed, and everything back together and working with no screws remaining! Thanks for doing the work and posting the video.
FINALLY!!, after years of looking at a almost black LCD screen, i finally decided to replace it with a LED,.. by myself!!.. and thnks to Arnold and his channel here, i succeeded!! :D:D
Verry glad that it works now.👍👍👍
Great job, and tutorial.
I've taken all of my Korgs apart many times for fixing, maintenance, swapping things, etc, in the course of over 30 years. But i never bothered to take them apart just because of the LCD backlight. Never bothered me at all. It's a bit harder to read, but not enough for me to merit stripping the whole thing apart just to change it. I admire your persistence 😃
Thank you so much👍
Yes Sir , Thanks a lot , without your help , no chance . Saved me 180 Euro
You are verry welcome, glad the video helps you.👍
I followed your video on replacing a display in a Wavestation and managed to fix mine. I'm going to attempt to insert a new El Foil in a 1993 Korg i3 and wondered if the procedure would be the same as the 01/Wfd. Did you fit the new foil next to the glass display or behind the old foil? Thanks for all your help. Great videos.
YES YES YES ! did it ! thanks it works great !!!!
3 jaren later.. scherm doet nog fantastisch.. maar moet echt iets aan de sticky keys gaan doen :P
Hello and thanks for uploading this tutorial. I have a 01W FD and the backlight is dead. Can you suggest where to buy the foil for backlighting? I also have to replace the backup battery. Can you please tell if it is soldered to the mainboard or just insterted as on computer motherboards? is it a standard CR2032? Many thanks. Kind regards
The backlight you can buy at backlight4you.com. the battery is not soldered but you can replace it just by clicking the old one out and push in a new one. Have fun
@@arnoldsretrokeys189 Replaced the battery, it was very easy, thank you. But about display I'm absolutely not able ( I have no soldering experience) and Korg repair center won't do it.
@@arnoldsretrokeys189 What model or size should I buy? Could you let us know?
Arnold thanks for uploading this video, i'm also trying to replace the backlight on my Korg 01wfd and t's been the best step by step video i've watched on youtube so far. I just have a couple question; why did you slide in the new foil over the old one? Can you take the old one out and put in the new one? Which way is better? Thanks in advanced. Blessings!!!
Hi Pianoman
Thanks for the kind words.
please dont take out the old foil begouse you will ruin your display, just desolder the two pins and cut them off tight to the display and slide the new foil in front of the old foil, it will fit perfect and than solder the two pins back on the display board.
Happy soldering.
La lámina vieja hay que sacarla,no sé por qué dice que si la saca arruinará la pantalla
I'm taking it to the shop
Hi. First, thanks for this video. I’m trying to replace my LED and LCD. The old one has two leads, the one I bought doesn’t. The only cable is the flat ribbon, and I wonder if they still need the others(?)
It’s my first time doing this and I’m not ver my handy but decided t give it a try after watching this video. Any thoughts?
Podrás tocar por favor los sonidos de programacion y combinación de bancos a y b en tu teclado korg 01w
Tóquenlos para ver que sonidos traen, que sean uno por uno
I am sorry but I cant understand wat you are telling me here. Can you please sent the question in English? Thank you.
hello
my synthesizer i30 works I put the sound of a1 piano and play i don't change the sound. program sound itself is changing and styles too problem in touchsrenn or display?i want know help me pls
thanks
Hi, nice video! What I didn't see is if you replaced the foil or if you slided the new one over the old one... I have to replace two of them in my D50 and SY77...
Hi Tony
I slided him behind over the old one and I works great, don't open the display or you will destroy it.
Happy soldering.
Hello. Very useful video. You did not show... Did you remove old folio? Thank you for your answer
Hi, thanks for you reply. I dit not remove the old foil, just slide the new foil in front of the old one on the display.👍
@@arnoldsretrokeys189 thank you 😊
Boy, Korg sure had some crappy design engineering back when this was produced. The first thing that's going to go on this keyboard and they make it the hardest thing to get at. I wish they would have designed it so you could get at it from the front without going through all the rigmarole in the back 🙂
La ingeniería de mierda de Korg es demasiada para tipos como tú
It maybe a laborious process, but Korg's design on these synths is anything but "crappy". Other brands are exactly the same for these types of synths.
The M1, T series, 01/W series, Wavestation, and Trinity where the pinnacle of Korg's design and built. They are almost virtually indestructible.
@@conan5885 For studio recording only so I just shine a flashlight over the top to find programs 🙂
Hi Arnold!! Thanks for the video. Would you, please, be so kind to tell me where I can get the replacement light and the specs of it? One more time, thank you so much.
AliExpress
I too have a 01/Wfd, and I've written all my songs on it, but I don't know how to export (or transfer) all the MIDI information (from the sequencer) into my laptop. Do you have any experience in this?
Buenas noches, felicidades por el emprendimiento, Quiero uno de esos reparos para mí teclado, dónde lo obtengo
bonjour,
ou peut on acheter la feuille pour changer le backlight
merci d' avance
cordialement
Thanks
Why i heave no lights?
Como podre conseguir la luz dela pantalla y los swich
AliExpress
Unfortunately, it doesn't work that way, because the el is still glued to the circuit board and you have to completely detach the frame for it
Thats correct but you dont need to take out the old foil, just slide the new foil in front of the old one. The old one is only glued on the back side. Please dont detach the frame begouse you will ruin the displey.
jeez, my 01wfd need screen work too, but after seeing this.... my god, looks difficult doing it myself
Its not that difficult as it looks, I would love to help you but I live in Holland and I don't know where you live.
@@arnoldsretrokeys189 Ik woon ook in Nederland 😁 Ooit heb ik al eens lopen zoeken naar een nieuw scherm etc etc, maar waar kan ik zon scherm nu beste bestellen?
@@RichardDenRooyen1973 Je kan het display bestellen bij .synth-parts.com, dat is in Duitsland.
Hij verzend gewoon naar Nederland. Er zit ook een SMD bij die je moet vervangen zoals je kan zien in het filmpje, ook zit er een duidelijke beschrijving bij. Wel prijzig euro 77,50.
Als je alleen de Ell Foil wilt vervangen dan heb ik deze hier nog wel liggen voor je.
En als je display defect is dan heb ik deze ook eventueel wel voor je, inclusief nieuwe Ell Foil voor een redelijk prijsje.
Alvast succes met de reparatie 👍👍
@@arnoldsretrokeys189 ok cool, hoe weet ik of alleen de folie vervangen moet worden of ook het scherm?
krog t2 keyboard display backlight not working
More Stupid Mickey Mouse Music🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🍻
Thanks 👍