Just having some fun with the new Mammoth AWD gantry. First layer: 200 mm/s First layer infill: 500 mm/s According to: 30K / @mammoth-3d / discord github.com/Mam... ko-fi.com/mamm...
Whahahaha yes that is so true! You should see the table it’s standing on. Things start falling off from all the shaking :-) I should make a video of that one day.
@@mammoth-3D I mean how Vorons don't have a full cube frame but leave out an edge at the top front. It detracts a lot from rigidity and AFAICT it's just a "form over function" thing.
WHAT THE FUCK!? DUDE! I'm sitting here, trying to figure out how to print a first layer and you do this kind of shit Oo What do you use for bed adhesion!?
whahahaha Yes I did in this print. But it's not for the first layer. It is that the ASA doesn't bond with the PEI Sheet. What I learned over the years. Get a good PEI sheet and stick with on brand, so you know what it can do and what not. The right tool for the job. I tested klicky, BD-sensor, ..... but the best and always consistent is the Beacon probe, not the CN version.
Sorry never gave you feedback about the adhesive I use. Any water based glue stick will do the job. In the US you can find lots. But in Europe hard to find, so im using bamboo lab glue stick.
Thank you very much! I never looked into it. Vz has a fixed gantry and im using a floating gantry. What part do you like. Maybe I can make something new?!
@@mammoth-3D I didn't even register it as floaing gantry - I just thought "that's a really low z height" 😆 In general I'm interested in better ways for tensioning and double shear that fit my Vz330. I know they're working on a double shear design but dunno when that will be released.
@@MrJofArnold It could also just mean that they will put two pulleys on one shaft?! Hard to tell. I do the same. Just to safe space. We will see what will come out at the end. Yes the belt tensioning system I made was, I don't need to loosen motor mounts and I don't tension directly on the motor shaft! And that is how the mammoth gantry was made. :-)
nothing to say just loved it
Thank you very much :-)
shaking like an old washing machine with a few screws loose
Whahahaha yes that is so true!
You should see the table it’s standing on. Things start falling off from all the shaking :-) I should make a video of that one day.
Doesn't help that it's doing the Voron thing of leaving out 1/4 of the top frame that would have provided a lot more rigidity...
@@daliasprints9798 Maybe im just misunderstanding about the frame. But this is a 300x300 Voron 2.4
@@mammoth-3D I mean how Vorons don't have a full cube frame but leave out an edge at the top front. It detracts a lot from rigidity and AFAICT it's just a "form over function" thing.
@@daliasprints9798er. Not sure why this one doesn't. But mine definitely does. Heh. Pretty sure it's just out of frame
WHAT THE FUCK!?
DUDE!
I'm sitting here, trying to figure out how to print a first layer and you do this kind of shit Oo
What do you use for bed adhesion!?
whahahaha
Yes I did in this print. But it's not for the first layer. It is that the ASA doesn't bond with the PEI Sheet.
What I learned over the years. Get a good PEI sheet and stick with on brand, so you know what it can do and what not. The right tool for the job. I tested klicky, BD-sensor, ..... but the best and always consistent is the Beacon probe, not the CN version.
Sorry never gave you feedback about the adhesive I use. Any water based glue stick will do the job. In the US you can find lots. But in Europe hard to find, so im using bamboo lab glue stick.
Impressive 😁
Thank you :-)
I'm wondering... could I use those printer stepper mounts on my Vz? (Also; love this project)
Thank you very much!
I never looked into it. Vz has a fixed gantry and im using a floating gantry. What part do you like. Maybe I can make something new?!
@@mammoth-3D I didn't even register it as floaing gantry - I just thought "that's a really low z height" 😆 In general I'm interested in better ways for tensioning and double shear that fit my Vz330. I know they're working on a double shear design but dunno when that will be released.
@@MrJofArnold Yes I just love floating gantry 🙂
Do you have a link to the double shear that fit my Vz330? If never hear about it. Sorry
@@mammoth-3D They've mentioned it a couple of times in the discord that they are working on it, but no more info than that I'm afraid
@@MrJofArnold It could also just mean that they will put two pulleys on one shaft?! Hard to tell. I do the same. Just to safe space. We will see what will come out at the end. Yes the belt tensioning system I made was, I don't need to loosen motor mounts and I don't tension directly on the motor shaft! And that is how the mammoth gantry was made. :-)
Is that water cooling for the steppers and hot end?
Yes I use water cooling for the steppers, hotted and 5160 Pro drivers
Hi, could you share info about the extruder, hotend and liquid cooling setups? Thanks!
Awesome 😮. Where can I find the stl
Thanks. Im still working on the docs. So it will go online soon.
Check out the Celeritas
Have a look at the other videos after this one. So even faster speed printes 👍🏻