Audi RNS-E bluetooth adapter instalation + coding AUX

Audi RNS-E audio aux source activation is a quick procedure. Your radio navigation system (also called Audi Navigation Plus) can play AUX-IN audio sources (stereo line-in), so you can connect your phone with your cars sound system.
Audi A3, A4, A6, TT

[@lukassrovnal2842]

Děkuji za video

[@yubrajlimbu7922]

I think this cause the battery drain.In my theory the best is to get the power wire from fuse box which is connect with igniation on / off.That's i have done and its work.You need a fuse taps set as well.

[@moisesgarcia8700]

Muchas gracias! Me sirvió mucho su video!

[@KhanKhan-gk3on]

FR: Mettez le "+" (fil rouge du module) sur D13 et le "-" (fil noir du module) sur D12 pour que le module s'éteigne quelques secondes ou minutes après avoir éteint l'autoradio ou le contact de la voiture. Donc ça n'usera pas la batterie.
EN: Put the "+" (red wire of the module) on D13 and the "-" (black wire of the module) on D12 so that the module turns off a few seconds or minutes after turning off the car radio or the car ignition. So it won't wear out the battery.

[@ismaelbarca1]

Bonjour c’est quoi d13 et d12 je peux vous contacter

[@denisdobron4302]

Zdravím, o jaký adaptér se jedná? Řeším teď bt na své Audi a nechci koupit nějaký nefunkční, jelikož jich je na internetu mnoho. Děkuji

[@tomv8240]

Ok ❓ I did that minus the coding. I'm gonna assume the coding is why mine doesn't work?

[@Jackchirak97]

Did you use VCDS or VAGCOM ?
Which cable ?
Thank you
I can't access 37-Navigation with VCDS 17.1.3 on my B7...

[@tjj6583]

Followed instructions and coding part. Added 4 to the existing 3 so I typed in 7 in the second last number in my code. Clicked Do it! on VCDS then I get an error message "out of range, unable to set premaster" and it's not programming the radio. Any ideas??? .

[@jessepreuter4016]

I kinda have the same problem, did you figure it out?

[@ameerhamza1520]

Hi!! During programming I am getting “out of parameters” error. It’s 2006 Audi a3. Can you please help???

[@andrejlubek2679]

Zdravím, vedeli by ste mi pomôcť s kódovaním aux ? Mam problém sa spojit na navigaciu alebo rádio v diagnostike

[@TopGdxrk]

I dont understand the coding part, so i just add 4 to the second last number in my code? Then restart it?

[@lifeofcarlovers4028]

Yes, you have to add +4 to the second last number, for example you have 1 there, so you have to add 4 to it, so then there will be the number 5.

[@KaineVarley]

I've been trying to get this to work for months. I don't have the VCDS software to code the Aux channel on. I finally found a local guy and he tried but failed. Looks like I need a software update first... Very frustrating... Does anyone have any advice? Where/how can I get the software updated, if this is in fact the thing I need to do...

[@sullythegamer2492]

Google rnse firmware update

[@mokad]

Did you manage to figure this out? Just started looking into getting aux or Bluetooth on my 2007 tt

[@sullythegamer2492]

@@mokad yes

[@Tajjy21]

How did you sort it out? Can you send me the firmware update file?

[@KaineVarley]

I gave up in the end... Possibly simpler to get an up to date head unit...

[@bronsonwilke2934]

I’m trying to do this on my 2003 s6 avant, have it hooked up and everything but when I try to enter the nav control module it keeps giving me no response from controller. Ignition is in the on position idk why it’s not working

[@damonstijkel]

Im facing the same problem, did you find an solution for it?

[@JamesBailey-vu3po]

can this be done with Carly

[@duryiko]

Nazdar spravil som všetko ako na videu - Bluetooth pripojený - AUX ukazuje akurat problém je že nepočuť žiadny zvuk.. nejaké rady prosím ?

[@andrejlubek2679]

Nazdar, Ja mám problém dostať sa cez diagnostiku do rádia. Vedel by si mi s tým pomôcť ?

[@ginellupascu8001]

i just did like you,after i reset the radio,but the aux selection didn't appers :(( TV and nav dind't work on my Nav could this be the problem ?

[@lifeofcarlovers4028]

You must have coded incorrectly. Only the penultimate number needs to be changed. +4 is added to the original value.

[@ginellupascu8001]

i did it but nothing ...

[@BSDBoyHDD]

Reboot and press cd twice

[@CroydonPatTesting]

I’ve installed mine today but the Bluetooth module is staying apparently on any suggestions

[@SeFxck]

i have isue too, instaled as video shows, but no AUX selection appers

[@lifeofcarlovers4028]

@@SeFxck if you coded aux, you need to restart the radio. Hold down the radio and setup buttons for 10 seconds.

[@SeFxck]

@@lifeofcarlovers4028 i did it ;/ maybe i coded something wrong i dont know

[@CpnQueen]

môžem sa spýtať kde si kúpil bluetooth adapter ? Link nejaký na shop ?

[@lifeofcarlovers4028]

Dá se koupit na ebay nebo aliexpressu.
a.aliexpress.com/_mtBaAZp

[@miroslavlunak9017]

Dobrý den, měl bych na vás prosbu, mohl by jste tohle udělat i na mém autě? Určitě bych nezůstal dlužné. Děkuji :)

[@lifeofcarlovers4028]

Dobrý den, odkud jste? Napište mi na email: [e-mail]

[@Blaiz96321]

Když bluetooth mám ale funguje jen jako handsfree, stačí jen nakodovat nebo i tak potřebuji ten adaptér?

[@lifeofcarlovers4028]

I tak je potřeba adaptér. Originální handsfree funguje jen na telefonování.

[@Blaiz96321]

@@lifeofcarlovers4028dobře, díky.

[@martymcfly8938]

dobrý den, to je místo CD changeru? děkuji

[@lifeofcarlovers4028]

Dobrý den, ano.

[@SYK3SHD]

I have rns-e but in vcds i cant connect to module 37- navigation

[@jakubwojewodzki9374]

i have the same touble like u, did you fix that?

[@sullythegamer2492]

Out of date firmware of vcdd

[@bronsonwilke2934]

@@sullythegamer2492 do you have to have the full version of vcds

[@bronsonwilke2934]

@@sullythegamer2492 and I have version 1.2