WHAT EVERY PRESS NEEDS...

This is a sweet goodbye as I move on to the next chapter as a screen printer. I will go over what I do and don't like about this press and what you might need to be looking for when purchasing yourself a press.
Pallet Registration Templet- www.etsy.com/l...
MUSIC BY AUDIIO.COM
Created with Corel VideoStudio.
pricing shirts, embroider, embroidering, embroidery, tips, tip, trick, tricks, t shirt printing, t shirt print, t-shirt, print, wash out booth, screen print, screen printing, screenprint, vastex, silk screen printing, how to, tutorial, silk screen print, silkscreen, silkscreening, silk, screen, printing, Do It Yourself, diy, shirts, shirt, t-shirt, DIY, ink, vinyl, scoop coater, emulsion, hacks, Kevin Acker

[@miguelsemidei7619]

We have been working for 35 years and have been able the work with a 4x6 . There are tricks to printing volume orders with two guys printing and one loading and one folding. We can run through 300 shirts an hour 4 colors .

[@034bleeder]

The only auto I can think of that will fit through a 34 inch door is an M&R.

[@Grmlin392]

Absolutely agree! I have the 4x6 V1000 and I wish it had the gas shocks instead of the springs. Too many close calls on being whacked by a screen after raising it when loaded haha 🤣🤣

[@KevinAcker]

I didn't know that about the 1000. I forgot to mention that the 2000 has about 8 different height adjustment for the screen (with the gas struts). Just out of curiosity, can the 1000 be adjusted as well or is it fixed?

[@Grmlin392]

@@KevinAcker In the manual, it gives you the proper placement for the springs out of the 4 various holes. I tried a different hole in the beginning, but it made the screen recoil up instead of being locked down when printing.

[@hurleymoulds]

Side clamps would come in handy for stacking high density, but for standard printing, the standard head on the V2K is outstanding.

[@KevinAcker]

When the time comes, If I part it out, I'll make you a good deal on a set. I know you could get some good use out of them

[@hurleymoulds]

@@KevinAcker much appreciated my man, I’m running a 6 head now. Wish I had the space for your 10, I would have jumped on it, few more years maybe. 😂

[@hectorcorona2693]

Hello Kevin I like your information on your videos Thank you

[@KevinAcker]

Thank you, I appreciate the positive feedback. I learned A LOT from CZcams so I'm just trying to give back.

[@lesweatherly7167]

Alright Kevin its been a month! When ya gonna show us that new press?

[@KevinAcker]

I know I know, it will be here next Friday!!! I have been 100 miles an hour trying to relocate stuff for the auto and keep orders going out the door... Soon, very soon!!!

[@wagyu_killer]

did you load the tshirt under the arm for big tshirts? trying to load 2x large tshirt under the platen looks hard because it will get caught on the bracket

[@KevinAcker]

I never had an issue with any shirt except toddler sizes and some youth xs. Which both were very very few times

[@yaldoshelelohim5564]

Hey Kevin are you gonna go with the Anatol auto press?

[@KevinAcker]

That's a solid guess. It is one of the three that will fit in the space I have

[@lesweatherly7167]

Anatol Volt?

[@KevinAcker]

🔥🔥🔥

[@Ramellosugahill]

So are you getting automatic now or a 6 color like anatol thunder or kruser would cool or rlley 300 6 color 6 station

[@KevinAcker]

I'm getting an auto. Should be here in about 10-12 weeks

[@Ramellosugahill]

@@KevinAcker sounds good its not to many are that small of a footprint congratulations