Most people don't know the reason for doing this, it is to prevent punctures in the inter tire. Once mounted and inflated the two tires will slip jus a little. Long thorns will puncture the outer tire but will break before penetrating the inter tire. Thus being almost puncture proof.
У меня отец на москвич на задние колёса так делал там были двух размеров и чётко подходили друг в друга, делал как продлить жизнь покрышки так и для увеличение грузоподьёмности грузил больше тонны, это было лет 25 назад.
@@Homo-Sapiens. Впервые слышу об этом. Флиппера ставили, это было на грузовиках, но чтоб покрышку в покрышку запихивать на легковых?! Как ее туда вобще затолкнуть можно, а потом еще и на цельный обод натянуть?
@@henryrollins9177 how dare you sir! Stroll in and just throw common sense around? Hard to imagine double tires being used in any application where they would spin fast enough for imbalance to be an issue. Props to you for being able to stop and think.
@@focus_gaming1438 yea I was really drunk when I made that comment. I rewatched the video and its a tire in a tire. Idk why I thought it was those army style runflats.
Aqui no Brasil normalmente a duplagem é feita em pneus de trator para uso em local que tem muitas pedras, pontas de toco ou espinhos. A dublagem normalmente é feita por fora com uma vulcanização, podem ser feitas várias camadas chegando a casa das dezenas.
idea...what if you just made one cut from tread to bead. That way you could either slide one end inside its cut end to make it smaller OR just feed it inside the bigger tire like a corkscrew.
That tire would not need to be balanced it is going on a tractor or loader or skid steer or for lift and those tires do not get balanced because you will never go fast enough to need it balanced.
Depending on where in the world you live, new quality tires could be cost prohibited. Also, how many tires are you running. Depending on the vehicle I'd say 10 plus a few spares, quality tires $500.00 X 12 = $6,000.00 here in the USA.
@@sam_s_ makes it a lot harder to get a flat tire and if you do the other tires inside still hold the car off the ground more rather than sinking like a normal flat tire does. 😉
Я так с велосипедными покрышками делал, лысую запихивал и спокойно по колючкам катался. Лысая под воздействием солнца и окружающей среды дубела и становилась более жесткой.
Take the double tire to discount tire and tell them to balance it, i wonder how long it would take them to realize..
Совет бывалого....старая покрышка прослужит дольше.....если не покупать новую😃
Hahahaha - From America with ❤
@@JesusSavesRepent
США?
basically a tire inside a tire, years ago used to do things like this on the farm, could not afford new ones so we did what we could
I think it's exactly a tire inside a tire. Popular in demolition derby's and equipment thats used in puncture prone areas
When in doubt a farmer will figure it out..
@@arthursherman3672 every time I seen more rigged shit on my grandfathers farm that still works today than any of this newer made machinery ridiculous
@@arthursherman3672 Not anymore, Monsanto's will buy them new ones.
@@Fiden6666 Monsanto wouldn't be a problem if we didn't let it be but we people are weak
How to re-tire a tire with a retired tire?
if you watch it in reverse.....
its quite disturbing to watch a tire give birth
😂
Yeah so was your birth😂🤡
@@prasantasahu5156 🎉
😅
😅😅😅
Why would you put an extremely cracked old tire in another tire?
Wondering the same thing.
Now THAT'S an old skill you don't see very often !!!!
This is a way to strengthen low pressure tires, almost like homemade run flats. Its an old tire, not an inner tube at all...
it's also how they ship them, you can fit 3 sometimes 4 inside each other to maximize space
Not intertube but inter tire now add a tube inside & spray foam between the 2 tires "mainly couse spray foam is cool "
Я и пододеяльник 😁
😆😆
do they put a tube in there afterwards, or is the inner tyre enough to keep it on the wheel? 👍🍺🇬🇧
Reading the comments is as informative as watching the video.
я точно также делаю с велосипедом 🚴♂️ двойной покрышки 👍👍👍😂😂😂❤️
Держит?
Или в чём смысл?
Типо не проколет?
Тежело крутить педали-не советую😃
Use to put a peace of water hose inside my bicycle tire because I couldn’t afford a new inner tube!!it worked pretty good !!!!
My father in law would line his tire with Vinson blinds slats to keep his inter tube from getting holes. It worked good
Model T tires they filled full of oats.
Are you serious tubes cost a few dollars
@@cheeseburgers82 poor farm kid with no money and tubes might as well have been a million dollars back then !!!
Heck yeah. Make it work one way or another
I can’t even get my hoodie on with my shirt staying comfortably where it should be… they just got a tire inside a tire
Inner tube in a tyre
That's some real deal
@@bryanhodges9626 That wasn't a tube. What vid were you watching
По-русски это называется шуба
Put them bout on take them off together then put them back on together, no wrinkles
я так же делал на трактор т 40 после развала ссср. все это от нищеты
Я тоже с отцом сделали, тоже после развала Советского Союза, на камазе пихали от газ 53
Да уж, были времена. Как вспомню так вздрогну!
Ну теперь то надеюсь, всё в порядке?!
@@user-yu1et6mt4q Если не обращать внимания на события последнего времени то все в порядке. Спасибо и успехов!
@@user-ut5hi9lu7w
Взаимно!
That inner tube is way tougher than I thought it would be
that is not an inner tube they just put a fucking tire inside a tire
@@josef-yx6zfI thought I was seeing things🤣👍
inner tubes are usually TUBES!!!
@@josef-yx6zf lmao! I didn't notice that!
Well...... If it's stupid and it works?
@@josef-yx6zfso they can charge them twice..
Most people don't know the reason for doing this, it is to prevent punctures in the inter tire. Once mounted and inflated the two tires will slip jus a little. Long thorns will puncture the outer tire but will break before penetrating the inter tire. Thus being almost puncture proof.
Já fis isso com minha bicicleta
Would only work with industrial and ag tyres
Correct mine are on plows and other cultivation equipment.
Now that’s a true run flat. Brilliant
No, it does nothing. At all.
@@GreyBlackWolf I was being sarcastic Captain Obvious
Не дай Бог, Каму попадётся это колесо на шиномонтажке.
его скорее всего даже бортировать не придется .
Экономия место для транспортировки
Ну я надеюсь ,что это не безкамерка,а если с камерой то ,надо камеру тоже двойную:)!!!Мы так на Уазиках делали и очень даже ничего🤣🤣🤣
A lot of hard work.
Возник первый вопрос... как? Посмотрел видео вопрос отпал .... возник вопрос нахуя? Зашёл в комментарии вроде тоже отпал 😂
Всё по делу)
Там камера бронебойка, он ломом тыкал тросами тер
@@user-tl4rn1mu3q не думаю что это для транспортировки,скорее всего та верхняя с сильным повреждением.а внутренняя хорошая.сделали типа шубы
@@alaverduxasimovith4307где там камера? Это скат
@@user-tl4rn1mu3q думаю как басиса на велосипеде, по стройке гонять и не боятся прокола
Впихнуть не впихуемое👍😁
😁🐺
اشقك شق
У меня отец на москвич на задние колёса так делал там были двух размеров и чётко подходили друг в друга, делал как продлить жизнь покрышки так и для увеличение грузоподьёмности грузил больше тонны, это было лет 25 назад.
В шину от иж каблука ставишь от обычного москвича, но только заебешься бортировать.
@@Homo-Sapiens.
Впервые слышу об этом. Флиппера ставили, это было на грузовиках, но чтоб покрышку в покрышку запихивать на легковых?!
Как ее туда вобще затолкнуть можно, а потом еще и на цельный обод натянуть?
А подвеска нахер пошла?
@@segei_petrovich там весь москвич нахуй пошёл. И подвеска, и лонжероны, и движок, всё кроме колёс 🤣
@@user-or4se6gv2b, ну если только так.😅
In my country people smuggle tyres in. They put 3 tyres inside one tyre. Without any machine.
How do they smuggle that initial tire though? Beach ball. Cause that would be impressive.
@@kefwals8722 they give money to custom officials and pay for only a few tyres. Instead of all of them
Back on the farm growing up, my folks would do something very similar to keep the tires on brush cutters from going flat
😊❤f😊😊😊😊.❤❤❤p❤❤❤❤❤❤
Can you imagine the balancing nightmare this setup would be. . i guess you wouldn't even try to balance it.
Why would you balance it?
Its a forklift wheel..!
@@henryrollins9177 how dare you sir! Stroll in and just throw common sense around? Hard to imagine double tires being used in any application where they would spin fast enough for imbalance to be an issue. Props to you for being able to stop and think.
@@kefwals8722 😀😀 cheers!
It’s use is for low speeds
@@focus_gaming1438 yea I was really drunk when I made that comment. I rewatched the video and its a tire in a tire. Idk why I thought it was those army style runflats.
Aqui no Brasil normalmente a duplagem é feita em pneus de trator para uso em local que tem muitas pedras, pontas de toco ou espinhos. A dublagem normalmente é feita por fora com uma vulcanização, podem ser feitas várias camadas chegando a casa das dezenas.
So they start with a new tire in the center usually?
idea...what if you just made one cut from tread to bead. That way you could either slide one end inside its cut end to make it smaller OR just feed it inside the bigger tire like a corkscrew.
I thought a bike tire tube was hard to insert.
It would be easier to just foam fill the tires.
Mano e serviço para montar esse pneu,tem que ser valorizado 👏👏👏
This looks like something you would be doing if you dropped out of 9th grade and never went back.
Ничто не вечно, под луной.
Хоть загони один в другой.
Bacalhao..
Manchón integral.
it's called booting the tire, was popular during the depression 1930 to 1940
Pro tip. Stab inner tubes with iron rods
A pry bar?
It's not a tube. It's a shaved down tire.🙂
Proof that there IS a way even if there is no will!
That’s how we should do our bicycles back in the day on May bring back memories back in the 80s
Перевод на русский язык
Someone is in the wrong line of work. But if this brings joy to your life that’s amazing. Keep it up.
You think anyone finds joy in doing that day after day…..they’re just trying to get by.
Now THAT is a heavy-duty tube....
It's not a tube
That tire they stuffed inside the other tires isn't much of a tube
um grande reforço até comprar outro
This isn't a mechanic, this is a highest mathematic. For strong men.😁
Aqui em Guanambi Bahia,na borracharia do Dema eles fazem isso com pneus bem maiores
Sim. Nos pneus 900, 1000 e1100 colocamos forras mas esse aí é bem menor.
Demolition derby guys been doing this for years
тот случай когда на новую резину денег нет
Mom can we have the Fast Car chord progression?
Mom: no, we have a Fast Car chord progression at home
Imagine your arm getting caught in that cable
I wasn't before, but now I am.🦾😭🤳
I used to double tyre my BMX they'd last forever
We always just used bead lube and rubbed it on the inner tube and put it in like that when it was a stiffer tube it would take 2
сколько секса из за того что начальник не покупает новые покрышки
Это для перевозки
What does sex have to do with a tire ? I’m not trying to make fun of you I’m just trying to understand what you mean
@@Hooter-J Он имел ввиду сколько мучений для простого работника,когда начальник экономит на покупке новой покрышки 😂
"Retired" looks like alot of work still lol
That's one way to close the holes and gaps of a larger tire...
Too bad they couldn't put a little fire between the two to better help seal it.
Its just a run flat. Theres no seal between em. It just provides support so the rims aren't damaged if it goes flat
That tire would not be balanced...and would be dangerous.
That tire would not need to be balanced it is going on a tractor or loader or skid steer or for lift and those tires do not get balanced because you will never go fast enough to need it balanced.
Não conhecia essa técnica. Muito interessante. Aqui no Brasil usamos uma forra, mas não desse porte.
Salam buat dek Pita Silva semoga sehat slalu dariku di arseba yogyakarta indonesia
Так вот что такое Run Flat !? 🤣
If the tire goes flat. This piece is very hard and provides support so the rims are not damaged
Колеса на новый Москвич?)
Нет, на Ваш запорожец.
Eso es una técnica muy antigua antes no había modo mecanizado,solo fuerza bruta.
Да нет,это ж на гномик,велик такой трёхколёсный.
Это на твой мозг
@@MrPistolet24 Я с вами на ты не переходил!
Странная реакция на обычный комментарий, вы что ватник?
Wowsers thats a straight wrestling match.
Работа достойная уважения грязная тяжелая и не простая
We fed them wheat primarily along with the laying mash/oyster shells back in the day(farm)
Отличное приспособление, супер
Buy a quality tire first then you don't have to deal with this crap.
Depending on where in the world you live, new quality tires could be cost prohibited. Also, how many tires are you running. Depending on the vehicle I'd say 10 plus a few spares, quality tires $500.00 X 12 = $6,000.00 here in the USA.
eso se llama tener mente abierta al cambio sin cambiar
Imagine doing this without the machine
I'd like to see how well that bead seals on the rim 🤔
It doesn’t
We do that all the time for demo cars. 13” in a 14” in a 15” fork lift tire. Barely any air lol
Why?
@@sam_s_ makes it a lot harder to get a flat tire and if you do the other tires inside still hold the car off the ground more rather than sinking like a normal flat tire does. 😉
@@nickhiller3337 Thanks for the reply. What kind of demo cars are you talking about?
@@sam_s_ no problem, mods. In Wisconsin
@@nickhiller3337 Oh... demolition. I was thinking demonstration. I was wondering what you were demonstrating, but now is makes sense.
А потом, опа протектор отслоился, о и грыжа вылезла.
And I have trouble getting a tube in a bicycle tire! 🤣😂
Спасибо за терпение.
I think that's what my grandfather called putting the boot in it.
Усиленная камера. Круто
Next time midas tells me I need a new tire i'm just going to tell them to do the thing with the cables. Seems legit.
Это делают для транспортировки на втор сырье. Что бы в фуру больше покрышек влезло. Я вам больше скажу, их потом будут доставать друг из друга.
That's alot of work to save 40 bucks
Now let’s see it seat correctly on a rim and air it up 😂
Found the gamer boy.
No worry
yours tyre will survive thousand years 😀
Theo tôi nghĩ có 2 vấn đề
1 là quả lốp bị thủng
2 là lốp cần chịu tải nặng lên họ lồng hái cái vào nhau để chịu tải trọng lớn hơn
Thanks, was intrigued 🤔
Aparte de eso mi Amigo, está el mayor gasto de combustible del auto en el que montes ésas llantas
Porque les aumenta mucho el peso.
Зачем?
Чтобы увеличить грузоподъёмность трака
Another great trick from the past 👍
Small wide tires are difficult to do. But that inner tyre looks so big to me.
Incrível montagem 👏👏
What the hell did I just watch!?
I used to put flour and water in my bike tubes to plug holes from tack weed punctures
we normally fill it up with foam
We heard you like tires, so we put a tire in a tire...
làm vậy chi cho mệt sao ko sản xuất lốp nó dày
Never thought would have worked !
Tire never have to worry about pothole. Downside is piss poor MPG
Now he has to take it out to patch all the holes.
А вот как её оттуда теперь извлечь?!
Damn that’s a lot of work
Demasiado trabajo para el resultado
Trabajo mucho aqui en vzla se hace eso mismo quitandole los bordes a los cauchos que van internos haciendo eso lo hace en la mitad del tiempo
demorava furar e podia andar alguns metros com o pneu furado
Расход топлива увеличился в 4 раза
Wow, I've heard of retread tires.
Я так с велосипедными покрышками делал, лысую запихивал и спокойно по колючкам катался. Лысая под воздействием солнца и окружающей среды дубела и становилась более жесткой.
I thought that was a tube at first, it's another tire 😲
A bottle of Slime would be way easier.
Aquí en la frontera lo hacen para llevar llantas usadas de usa a México ilegal pero es más fácil de llevar más
Какой труд