CT50 Fiber Cleaver by Fujikura (Comparison and Overview)

#CT50 #AFLCT50 #FujikuraCT50 CT50 Fiber Optic Cleaver by Fujikura is built with Bluetooth and is the replacement to the CT30 Cleaver. The CT50 features automatic blade rotation via Bluetooth via the Splice+ app for your phone or pressing the blade rotation button on the cleaver. You can still manually rotate the blade by using the wheel on the bottom, no tools required.
Once paired with a Bluetooth enabled Fujikura splicer, cleaver blade positions can be automatically advanced when needed based on cleave count or cleave quality. This enables the blade to make the most and best use of it and extends the blade life up to 60,000 cleaves.
The blade position indicator clearly displays the selected position and much easier to read compared to the CT30.
Features:
- Motorized blade rotation
- Bluetooth communication
- Shock resistant
- Simple one-step operation
- 60,000 cleave blade life
- Field serviceable
Order online at www.discount-low-voltage.com/...
CT50 Instruction Manual Page 1 www.discount-low-voltage.com/...
CT50 Instruction Manual Page 2 www.discount-low-voltage.com/...
------------------ Order online at the link above or ---------------------
Order by phone [phone]
Visit our website
www.discount-low-voltage.com/
Read How To Articles, Product Spotlights and more on our blog:
dlvblog.com/
Follow us on Facebook for Coupon Codes, New Updates and more:
Facebook / discountlowvoltage
Follow us on Instgram / discountlowvoltage

[@exelvalentine300]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@shamshadjani5055]

how clever blade posistion change ct 08

[@japelete6185]

please someone cant send me link for splice app

[@harpreetsaini5176]

Bai 88s di v specific dasdo ki ki a

[@anshyadavgamerz]

What is the correct blade position of clevar to cut the wire of fibre

[@DiscountLowVoltage]

Any position. Right out the box, it's good to go.

[@narayanaswamyketha667]

Please tell me the correct blade posstions in cut the plc spliters

[@optiona5588]

The correct blade placement is determined by the machine. At which point on the 70S+ will tell you where to put it. The 90S will simply adjust the cleaver for you. If your machine is having issues determining the correct blade height, place the cleaver on a hard surface in front of your vehicles tires. Then place your vehicle in drive. Run over the cleaver once going forwards and once going backwards. If the cleaver is still intact after this process, please repeat until the cleaver is unrecognizably smashed into molecule sized pieces. Then call Fuji and tell them what a pile of garbage the CT-50 is.

[@ThaKidDelcid]

Can you help me my ct50 won't open I believe a spring is off do you know what to do to fix it, it won't open nor shut to cleave

[@DiscountLowVoltage]

Wow! I never heard of that problem before. Unfortunately, I don't have a good answer. Should still be under warranty.

[@optiona5588]

I’ve been using this cleaver with the 90S now for 6 months. Nothing good to report. 1) the cleave angles are horrid. 2) the burns due to the cleave angle don’t OTDR/power meter good. 3) cleaver, machine and case are entirely too big and heavy. 4) the cleaver will unexpectedly and unnecessarily rotate the wheel because the cleaver sucks so bad that the splice machine thinks the wheel needs to be rotated when it simply needs to be thrown in the garbage. In summary, Fuji hasn’t made any good machines since the 62S+ and CT-30 cleaver. The only real problem with the 62S+ was the heater was way too slow.

[@Guile-NYC]

I'm having the exact same cleave angle issues with the CT-50.

[@sarasotaking]

Im having the exact same issue !

[@ClaudiuLichi]

I have the same problems. Finally decided not to pair cleaver with splicer. To much fuss about nothing.

[@convictsaab]

Totally agree. The only thing makes sense with this cleaver is durability so the technicians don't smash it to bits when stressed out...

[@haroldpalmsesq2506]

I shipped The CT-50 back the next day after I got it. Could not get a clean cleave.

[@DiscountLowVoltage]

Right out of the box double check that the glass was stripped properly. czcams.com/video/x-PiTpG1xnA/video.html

[@Srikanthpalagani]

price ?

[@convictsaab]

Been splicing for 16 years, tried many different types of cleavers. Sumitomo, Fujikura CT-06, CT-30, CT-04B from early 90'ies and even no name chinese knock offs but CT-50 is the worst ever cleaver in my experience. If i could turn back time i would never change my 10 year old 60S and CT-30 to this 90S and CT-50 bluetooth crap which doesn't even work often...

[@martijndejong5526]

Het is inderdaad een enorme faal.
Ik ben weer terug naar fitel gegaan.

[@martijndejong5526]

Bluetooth fail 😆