I accidently exported this in 50 fps :D But I thought that lets give it a try, so let you me know what do you think? And if there is other youtuber's watching this and you don't have yet Facebook pages or you are fed up on handling them yourself, throw a Maria/Voov media email and they will take care it for you. Contact partners@voovmedia.com or visit www.voovmedia.com
Callback to many years ago; Lauri and Anni had a thermal camera, and a channel called Thermal Guys. I think they made one video. Edit: here it is. youtube.com/@thermalguys2535?si=Ko1pqoqek8w3VqdE
Should send the hammer back to the manufacturer and say it must have been a bad hammer because it twisted when you used it, let them think you're thor 😂
Monty Python Bridge Keeper: “What is your favorite color?” Legendary King Arthur: “Red.” Monty Python Bridge Keeper: “What is the melting point of a ballistic squirrel?” Legendary King Arthur: “One.” Monty Python Bridge Keeper: “One…what?” Legendary King Arthur: “One hydraulically pressed sledgehammer, of course. Everyone knows that.” Monty Python Bridge Keeper: “Right! Off you go.”
Could mimic a larger Hydraulic press using a system of levers. The hydraulic press pushes down on the end of the lever arm, while the item being crushed is in the middle of the lever arm. Shorter vertical travel but greater pressure. The lever arms would be thick and heavy. It is comparable to using a longer stapler arm, to staple through thicker books
@@Geoffr524 Yeah, IF they could find a lever that would actually withstand MORE force than this press already puts out, WITHOUT bending or breaking/buckling... THAT would be the key to getting that to work!
At least in the US, blacksmiths call those things "anvil shaped objects" they are fine for light cold-work, like the sort of things jewelers tend to do. But they aren't so great at standing up to a shift of making even simple steel projects, like door hinges.
Way back a few years in mold and die making we used a process called "Hobbing" to form cavities in steel by pressing a hardened steel punch in the form of the part we wanted die cast or mold in plastic. This was done to make a cavity that would be very difficult to machine in the solid. The presses were quite large and averaged over 1500 tons. Now a days we have EDM, Electrical Discharge Machining also called Spark Erosion. I still have a few of the hobs from back in the 1950's. The cavity steel was low carbon steel and after the hobbing process the steel cavity was carburized and hardened. I have been in the business of mold and die making way too long. Love your videos. Keep on doing the fun stuff.
You should put tape down at the corners of the press so you can see how far it moves. It might be important for maintenance but really it would be cool to know how much that insane thing moved on that hammer... that was nuts
The anvil never stood a chance, they’re hardened and tempered on the face for striking and even the best ones are only H&T’d in the important areas, cheap ones like that would give way before most standard hammers let alone a sledgehammer.
need to get a thermal camera and watch the heat signature as it ( the object) gets mashed and see how hot and how fast it happens... does the heat increase before it changes shape or only when the shape changes....
First, mouth off my fluffel of bunnies. Or is that more of s silent but deadly kind of thing? Second, it would be cool to see in thermal IR but I wonder if current cameras have a high enough frame rate to catch the action of the metal breaking, but also see hot spots before they dissipate into a blur. Probably good enough to get a pretty good sense of what is going on but I bet reality would look cooler (hotter) .
@@NataliaBazj the geometry is simple enough to assume the theoretical 45°. No need for Mohr's circle of stress. Just cut the 45° such that the hammerhead turns instead of sliding to one side.
Nice video as usual, and pretty cool to see someone from the States over there. I've actually been to Florida a few times, and live in South Carolina myself. My friends from across the street growing up actually moved to Florida, but before they did they would go there to visit family, and I even ate and the world's largest McDonald's with them on one of their visits. Anyway, I look forward to seeing the hammer explode. It might have went with a diagonal cut of about 45°.
U should get JB weld steel putty. Make a perfect cube using one stick. (When it starts to firm up thats when u really wanna squeeze it too a solid block.) Then let it harden for like 24 hours. Then put under the press.i wanna see how strong it is..and what happend too the liftle screen where we could see rhe punds of force
The fiber glass in the handle makes it resistant to extruding out the hole as the hole changes shape. Still impressive though, not all fiberglass-reinforced polymer is the same.
Lauri and co, just out of curiosity but what is the press used on the workshop when it’s not being used for the channel shots? Press-fitting of parts and stuff?
Can anybody explain me pls? The previous 150ton press compressed a tungsten block but your telling me this 300ton press cant even budge a sledgehammer?? How tho?
*hers :D I am not always very good on English clearly :D We don't have separate pronoun for different genders on Finnish language so I tend to mess these up really often.
I accidently exported this in 50 fps :D But I thought that lets give it a try, so let you me know what do you think? And if there is other youtuber's watching this and you don't have yet Facebook pages or you are fed up on handling them yourself, throw a Maria/Voov media email and they will take care it for you. Contact partners@voovmedia.com or visit www.voovmedia.com
GET A THERMAL IMAGER!! Then you can see how damn got that shit gets!!
You are forgiven, my son.
Upload the next video with 70fps and we'll call it even?
I couldn't tell the difference.
add an infrared camera to see things cooking as they are squeezed.
Now you need a thermal camera.
Is my music 🔥🔥
Yes!👍🏼
Callback to many years ago;
Lauri and Anni had a thermal camera, and a channel called Thermal Guys.
I think they made one video.
Edit: here it is. youtube.com/@thermalguys2535?si=Ko1pqoqek8w3VqdE
Thermal camera would be real neat to watch things heat up as they squish
@@superpaul79 Nice thank for pointing that out :)
Emotional support squirrel?
No, hammer handle support squirrel... :D
Should send the hammer back to the manufacturer and say it must have been a bad hammer because it twisted when you used it, let them think you're thor 😂
Need a sign that says "Caution, Objects Become Hot When Crushed"
"Content of this room is hotter than it appears"
The best advertisement that sledgehammer company could have. They owe you guys lol.
We need a t-shirt which says "pallistik sköröl" 😂
Or perhaps "orava ammus". :D
Bballistik müsse *and* skvirrell.
You should name the Ballistic Gel Head "Preston" or "Press-Ton".
😂❤
5:04 i fully thought he was about to swing that hammer down for some reason at this point lmao
Ballistic SQUIRL thermometer. 😂
Monty Python Bridge Keeper: “What is your favorite color?”
Legendary King Arthur: “Red.”
Monty Python Bridge Keeper: “What is the melting point of a ballistic squirrel?”
Legendary King Arthur: “One.”
Monty Python Bridge Keeper: “One…what?”
Legendary King Arthur: “One hydraulically pressed sledgehammer, of course. Everyone knows that.”
Monty Python Bridge Keeper: “Right! Off you go.”
Dang, you guys ALREADY need an even MORE powerful hydraulic press! (For the full size sledgehammer, unmodified)
Could mimic a larger Hydraulic press using a system of levers.
The hydraulic press pushes down on the end of the lever arm,
while the item being crushed is in the middle of the lever arm.
Shorter vertical travel but greater pressure.
The lever arms would be thick and heavy.
It is comparable to using a longer stapler arm, to staple through thicker books
@@Geoffr524 Yeah, IF they could find a lever that would actually withstand MORE force than this press already puts out, WITHOUT bending or breaking/buckling... THAT would be the key to getting that to work!
That's a good hammer :o doesn't break just deforms.
6:16 "Let's twist this like this, and he's going to take it to the face..."
Hydraulic Press Channel debuts on Grinder
At least in the US, blacksmiths call those things "anvil shaped objects" they are fine for light cold-work, like the sort of things jewelers tend to do. But they aren't so great at standing up to a shift of making even simple steel projects, like door hinges.
Anvil shaped object is like food like matter for this foodie and serious home cook.
@@maestrovso Krusty Burger - America's favourite meat flavoured sandwich
Came here to see if anyone had mentioned ASOs yet.
Were's my aammer?🙆♀️by photonicinduction🤗
Wow, the press did morning stretches! That looked quite terrifying.
Holy guacamole Batman! That hammer press was awesome!! Poor Mr. Squirrel, he stopped by to visit those nuts and they melt his head lol.
I'd love to see a thermal camera or something to see how hot these things get (and the heat propogation) as the metal deforms.
Please bring the hammer back to the shop: "It won't stand anything!"
I want to see those faces!
Would a temperature gun be a good idea to see how hot these items get while being hydrylic pressed?
Wonderful video. 👍
I hope Maria got to keep that smushed mallet as a souvenir!!
I was not ready for the plastic deformation of the hammer. Of course you cannot see it but the fact it was hot after was expected by Lauri.
It would be cool to see it via infrared or some sort of temperature measurement while crushing ^^
Of course nobody told Maria to stop the press when the piston and frame start twisting 3:45 🤦
Way back a few years in mold and die making we used a process called "Hobbing" to form cavities in steel by pressing a hardened steel punch in the form of the part we wanted die cast or mold in plastic. This was done to make a cavity that would be very difficult to machine in the solid. The presses were quite large and averaged over 1500 tons.
Now a days we have EDM, Electrical Discharge Machining also called Spark Erosion. I still have a few of the hobs from back in the 1950's. The cavity steel was low carbon steel and after the hobbing process the steel cavity was carburized and hardened.
I have been in the business of mold and die making way too long.
Love your videos. Keep on doing the fun stuff.
“What is the melting point of a ballistic squirrel? This is the kind of question that needs answering.
You should heat the sledgehammer until it’s red hot then try. Love your videos
Im sorry I have to do this. "Florida Woman Travels to Europe, Destroys Anvil"
Trying to figure out that headline properly.
Edit: I think you got it right.
That’d be a great local news story.
I’d publish it.
Welcome to the HPC team Gel Bob No Hat. 🫡
Seems the cat was lucky today 😸
Lauri would've stopped the press when the hammer was crushed. The lateral movement was off the charts.
Don't let novices handle this press.
You should put tape down at the corners of the press so you can see how far it moves. It might be important for maintenance but really it would be cool to know how much that insane thing moved on that hammer... that was nuts
Maria is a wonderful guest. She has the right humor. The crushing homor. 👍
Maria is the best!!!🎉❤
Even Wile E. Coyote's anvils never cracked.
I love Hanna's Shirt!
The anvil never stood a chance, they’re hardened and tempered on the face for striking and even the best ones are only H&T’d in the important areas, cheap ones like that would give way before most standard hammers let alone a sledgehammer.
I often feel like the press should be twice as bulky. It flexes a lot, and even jumps up a little bit.
Press: i'm gonna crush you.
Sledge hammer: hold my beer.
need to get a thermal camera and watch the heat signature as it ( the object) gets mashed and see how hot and how fast it happens... does the heat increase before it changes shape or only when the shape changes....
First, mouth off my fluffel of bunnies. Or is that more of s silent but deadly kind of thing? Second, it would be cool to see in thermal IR but I wonder if current cameras have a high enough frame rate to catch the action of the metal breaking, but also see hot spots before they dissipate into a blur. Probably good enough to get a pretty good sense of what is going on but I bet reality would look cooler (hotter) .
That first anvil looked like it had a big void space in it.
Use the shearing angle of materials. Grind at 45°
Yes. The crack on the first hammer was slanted. Other pieces of metal we have observed on HPC also chipped obliquely.
@@NataliaBazj the geometry is simple enough to assume the theoretical 45°. No need for Mohr's circle of stress.
Just cut the 45° such that the hammerhead turns instead of sliding to one side.
I put the press to slow speed to make it even more terrifying...
Truer words have not been spoken since
Next scene: Maria almost breaks press
It's hammer time 😂
Clearly I need to buy one of those non-exploding hammers.
I wonder if perhaps the sledge hammer head is through-hardened, while maybe that other hammer was only case-hardened (and maybe not very well?)
You were my first CZcams channel and you're still a favorite. It's like my smart college friends: hey, what would happen if...
At least you tried Lori! I really like your ballistic squirrel! Squirrels are my fav animal so maybe he can be your new mascot. SquirrelBob no nuts.
Hanna looks so different with a little hair dye. Amazing!
Nice video as usual, and pretty cool to see someone from the States over there. I've actually been to Florida a few times, and live in South Carolina myself. My friends from across the street growing up actually moved to Florida, but before they did they would go there to visit family, and I even ate and the world's largest McDonald's with them on one of their visits. Anyway, I look forward to seeing the hammer explode. It might have went with a diagonal cut of about 45°.
That looked VERY LOUD
4:20 ah yes, the new cursive italic hammer
Cast versus forged anvil though.
That hammer woke up the neighbours for sure, damn!!!
*You need to throw a thermal camera into the mix.*
U should get JB weld steel putty. Make a perfect cube using one stick. (When it starts to firm up thats when u really wanna squeeze it too a solid block.)
Then let it harden for like 24 hours.
Then put under the press.i wanna see how strong it is..and what happend too the liftle screen where we could see rhe punds of force
Try putting the hot hammer on a block of ice.
The fiber glass in the handle makes it resistant to extruding out the hole as the hole changes shape. Still impressive though, not all fiberglass-reinforced polymer is the same.
love from germany!
2 🇩🇪🇩🇪
That's not an anvil, that's an ASO.
The bolistic head looks like the Terminator 😎
Why Lauri's wearing the picture of Marcus Aurelius on his t-shirt?
Maria!
Hi from Naples 🌴
I still can't believe how much deflection is in the press itself!!!
Can you guys hydraulic press a hydraulic press?
They have done so in the past. Search the Videos on their YT page. 👍
czcams.com/video/IvHbXoNFMz4/video.html
That's a damn good quality sledgehammer tho !!
You need a bigger press. 300 tons is nothing.
Sometimes you have to fail in order to feed
What steel is the Anvil and base of the actual Hydraulic press made from. Do they ever fail?
Lauri and co, just out of curiosity but what is the press used on the workshop when it’s not being used for the channel shots? Press-fitting of parts and stuff?
now u need to make part2😢
Love from norway!
Flea from The Red Hot Chili Peppers has many talents it seems
I have a 270tonne press for sale in Australia
What brand was the sledge hammer? I think that was a pretty good durability test!
I'm subscribed to you guys but I constantly have to come back and look to see if theres new videos because youtube never recommends them :(
Hi Maria! I hope you had fun on your trip :)
Ah yes I sure like the sköröl😂
Ballistic Boris
Anvil-man, Anvil-man. Anvil-man hates Hammer-man. They have a fight, Hammer wins. Anvil-man.
What brand is the sledge hammer?🙂
I wonder if the cylinder's seals got damaged as it moved sideways in the hammer crush around 4 minute mark.
Hearing an American accent threw me for SUCH A HARD loop.
The Press jumped off the floor are you sure that it's not damaged 😢
HAMMERTIME!! Awesome!!
Gel Bob looks like Putin😂
Can anybody explain me pls?
The previous 150ton press compressed a tungsten block but your telling me this 300ton press cant even budge a sledgehammer?? How tho?
Melting point of skurrul is about nutty degrees...
..
😬
When's the last time you used a Hammer?????
Quality sledgehammer!
You should get a digital termometer. And did you lose a tooth?
Have you tested the furious hammer versus the cast carbon steel anvil? 😁
Thermal Camera for sure!
Maria sounds like a larger Michelle Rodriguez
@3:50
This does not seem healthy to sheer a press that far. I can imagine that it became damaged from that
Maria and his team?
*hers :D I am not always very good on English clearly :D We don't have separate pronoun for different genders on Finnish language so I tend to mess these up really often.
@@HydraulicPressChannel Alright, you're forgiven for that. I was just hoping this wasn't some american pronoune thing.
@@scrwbl8Although, if it doesn’t really matter, then it doesn’t really matter.
@@twestgard2 That must be some Finnish wisdom.
@@HydraulicPressChannel Careful, don't get yourself cancelled! 🙂
The hammer has a hot crush on the press 😉
You gotta get a bigger press
poor sköröl 🐿
нетфликс добрался и до ГПЧ