RODECaster Pro II - Can This Replace My Whole Studio?
Vložit
- čas přidán 4. 07. 2024
- mrc.fm/rode Is it possible for the brand new RODECaster Pro 2 to replace all of my studio gear including processors, mixers, Elgato stream decks, and more?
I’m making a list with the cost of my current audio gear to see if the RODECaster Pro 2 has the same capabilities for less. Stay tuned to find out what my recommendation is!
Want to check out the equipment I used? Head on over to ▶mrc.fm/resources
▶ mrc.fm/presets ◀ 🎙 Adobe Audition Presets! 🎧 The audio presets I use.
▶ mrc.fm/learn ◀ 🎚 Learn how to master audio production using Audacity or Adobe Audition. 🎤
#audioequipment #rodecasterpro #microphone
0:00 Tutorial Start
0:19 Getting Started
1:48 Microphone Processors
3:28 Final Processing
5:53 Mixing
7:43 Built-in Effects
9:12 Live Content Creation Control
10:42 Recording and Backup
11:32 Recap
13:39 RODECaster Pro II Sound Test
14:29 RODECaster Pro II Pros
16:05 RODECaster Pro II Cons
18:15 Requests
20:06 Wrap Up
▶My CZcams Setup: mrc.fm/equipment
▶Get FREE jingles: mrc.fm/fjf
▶Subscribe To My Channel: mrc.fm/youtube
🎙Cool Stuff For Audio Creators🎙
▶Community For Audio Geeks Like Me: community.musicradiocreative.com
▶Buy My Royalty Free Music: musicradiocreative.com/collec...
▶Get Your Own Jingles and Voice Overs: musicradiocreative.com
▶Get the exact sound effects and audio production elements I use here: mrc.fm/sfx
▶Audio Sale is now ON: mrc.fm/sale
----
Hi there! I'm Mike Russell from Music Radio Creative. I am an Adobe Certified Professional and my aim is to teach you the secrets you need to know to create better-sounding audio with the use of various techniques. From Adobe Audition tips and tricks to your choice of microphones, audio gear, home recording setup, and many more! Podcasters, Livestreamers, Filmmakers, and even CZcamsrs can make use of what I am about to show! - Jak na to + styl
💥💥 AWESOME UPDATE 💥💥 If you have enjoyed this video and are looking for ways to support my channel please check out my website musicradiocreative.com/ - you can purchase high quality voice overs, royalty free music, DJ drops, radio jingles, ads and a lot more! I have founded the business in 2011 to support audio creators like you with high quality audio elements. By using my store you support further videos like this one 🤩🥳🤖
Love that EVERY SINGLE ONE OF YOUR SUGGESTIONS is not only straight-forward, but something that can be accomplished with an over-the-wire update. Bully for you, Mate!
👍
Thank you for the great review Mike, I am really excited by this deck. I hope you release some setup/configuration videos to help us get it dialed in just right
Thanks Will
I have a goxlr mini and have been thinking of upgradiing. ive watched several videos in the last 2 days about the differences between the rodecaster pro and the pro II - this is by far the most concise overview of the pro II feature set and summary. really amazing work with this video. thank you!
🙏
I just pick one up for 300 it’s amazing!!
Tremendous ❤. I watched many videos but no one described like you did. Specially with saving audio.
Thanks!
O.M.G. Thanks Mike for the great video. And agree with your requests list.
Thank you
I've been loving the RP II and look foreword to future updates. As Always, Nice job Mike!
🙏
@@MikeRussell Amazing gear and you don't get your pants pulled down over the price. merci mon ami
Hi Mike, great video as always! I agree with you about the RCP 2...great unit with some room for growth. One note. I heard the latency in my headphones just as you did, initially. Now that I've updated the fw to the official 1.0.7 release I am not hearing it. Either I've gotten used to it and am not noticing it now or they fixed it.
Thanks again Mike!
👌
GREAT! video Mike, I do not have all the gear you list here, but I have ears for making PRO recordings for my original songs and music and surely now know what I have been missing. Now with the purchase of my RCP2, I have it. I fully agree with your requests for future updates and want to add for RODE to try and give the unit even more, DAW combining capabilities going forward.
👌
We had another discussion below, but took your advice and bought one of these because it's a lot of function for the price. You're 100% right. Like you, I have more interfaces than I need, but I think this is a no brainer. Thanks again!!
👍
Update, I couldn't get Bluetooth phone calls to work well at consistently good volume going to caller, and the entire interface would lock up so badly that I had to bounce the power to get it back. I returned it. Had the latest firmware, which at the time I thought was free of such issues.
What a great review. Thank you for the amazing work you keep on doing. Now I want to get rid of my RCP1 and get a RCP2.
I sent my RCP1 back when I heard the RCP2 was coming out.
@@AskAW How did you do that?
Thanks for the detailed review! You are the best!
Thank you
EASILY the best review of this product. Top tier.
Thank you
Awsome video,Mike!! This is what I was looking for...Many thanks!
👌
What a great piece of hardware! I'm impressed
It's pretty impressive
Awesome video Mike. I too have a mixer, mic processors, multiple audio inputs etc and a multitude of cables in my home Internet Radio setup and will be looking at getting the RPC2 to replace them all. The mixer cover is a smart move as one of my bugbears is forever dusting out the mixer's channels and buttons and I have a Decksaver cover on my Pioneer DDJ2 controller which has kept it looking clean like new from day one. As others have asked it would be great to get follow-up videos on the best settings for all the different features of the RPC2. Keep up the great work.
One important consideration for you is whether you have enough inputs to run an internet radio station using this desk
@@MikeRussell Thanks for the tip Mike. I only use one PC for broadcast sound input and output and a second one for monitoring our chatroom, Facebook, etc. I've watched a video on using the RCP2 for radio and it seems a simple enough setup.
Wow, fantastic video recommendation for the Rodecaster Pro II, almost made me reach for the buy button online immediately. 🙂 The best thing with this video is that it gives some real pointers on what a pro creator uses to create the content they put out. The fact the Rode can replace nearly 99% of what you use today is a phenominal endorsement. I'm a complete newbie so still learning, but the flexibility and ease of use that you demonstrate in this video has literally blown me away. Did Rode come up with any of your suggestions in a firmware update since you made this video? Thanks again for such a great video.
Thank you for your kind comments
Fantastic review! I just got the RODECaster Pro 1 and I love it. But this RODECaster 2 is definitely one hell of an upgrade! Not sure if I really need to upgrade at the moment, but This is an amazing unit! 👍🏾
Both are tremendous bits of kit 👍
Lovely video Mike, I have the Rodecaster Pro 1 and a feature I would find great would be the ability to split and assign the pads to 2 different faders. So left and right pads are on separate faders so you can dip a bed to hear audio over it etc. Great content as ever!
Good feature suggestion. May happen on the RCP2 moving forward
Can you please advise which device is a good tool for changing or tuning voice please?
You would do this in post processing and there are videos on the channel on this
For customization, It’d be interesting as well to be able to change the name and icon of each input (our own icons) and still have in the input settings a reminder that it corresponds to the physical input it was originally named after…
Also I think they should made the RODE Central app compatible with Linux.
Cheers mate, amazing video!
👍
I am so happy I came across your video. You got a dedicated subscriber. I am buying this next week. I do animation and need this for my future channel
Thanks for the sub 👍
Thank you so much! It works really well!
The best review so far. You had me changed my mind for buying Rode Caster 2
Thanks, I'm glad my review was helpful in making your purchasing decision!
This really was a great, insightful, helpful video
Thanks
No podía estar mejor explicado. Gracias, Mike.
🙏
I haven’t watched through the entire video yet and I already feel that Mike has sold me a new toy for the studio.
Thanks Mike!
I'm sure you'll have fun with it
Great video and review Mike.
Thx 👍👌
🙏
Thank you very much for this, Mike! Really great helpful video! Just wondering though, in what order are your processes connected? Maybe it's just my lack of experience with this but I'd be really curious to know the order of the chains (maybe even in like a wiring diagram form). For example which comes first right after the mic, etc? Thanks!
Everything connects to the Rodecaster Pro 2 so there is nothing to worry about
Awesome review!
Thanks
Thanks for the complete review ! I was looking into it to have an home studio music recording and maybe use it to do live streaming. I was looking on the price at first and I wasn't because it was only for a home solution and not a pro studio. But I'm sure that this is 100% worth the price with all those features ! Thanks again :D
Your only limitation is the number of line inputs being limited to 1 but if you're not using more than 1 then it's an ideal solution for you.
Am really amazed by your channel ❤
Thanks
Exactly the info I was looking for.
Glad to have helped
Wow, that's brill. I love my original Rodecaster but now I've got Rodecaster II envy
👍
What a wonderful piece of kit. Amazing just how many features are packed into this unit at only $700. Very nice, thorough review. Thanks for the video!!
👍
you have a fantastic radio voice.
thanks for doing this :)
you seem like a good lad!
Thank you
19:29 Back when I was on the original RODECaster Pro I asked the same thing about the looped audio on the pads. I don't know if it was ever fixed. This goes back to a service request added on November 6, 2020. My response from RODE was: "Thank you for your reply!
We will definitely look into this and recommend keeping an eye on social channels for any possible updates."
This was one of the reasons I went to the GoXLR. Kind of sad to hear it hasn't been fixed.
Hello. Many thanks for this. I suspect my dbx 286s units will soon find a new home elsewhere. Cheers!
👍
You're very much correct, Mike. This piece of a device, called Rodecaster Pro II, is compact, yet it is a fully integrated audio solution. Good job man, for this wonderful comparison.
👍
Great review. I would like to see submixes as streamer too. But the best and outstanding thing is, you can connect two PC wie usb and tata solved the problem with sound from streaming to gaming an back. If it had a EQ for the headphone that would be grate too.
I would love to see a firmware update with a LIMITER on the master channel. Kinda like in Audition's or Premiere Pro's "Dynamic" effect ... set it to -6db and be sure it never goes higher than that.
Thanks for this outstanding work Mike, will it kill the feed to studio monitors as mics are opened?
This can be set in the options
Mike … love your content. I use first generation RCP for in-studio interviews with non-broadcast folks. I’m concerned that latency in RCP 2 will be an issue with guests. RCP 1 does not have this issue.
Very best Video for this Product!
🙏
Such an amazing request Master Mike, we will be greatful for your request and hope to be the first to check it out ❤
very good review, makes me wanna buy the product right away.
🙏
Thanks Mike going to buy one now
Enjoy diving into all its features and happy recording!
You’ve convinced me to go out and pick one of these up for myself! Can’t wait to get it all set up! The possibilities with this thing keep coming and I’m excited to absolutely evolve my sound with it!
Have fun 👍
Outstanding details here thanks for your initial review! That
Red in-shot light is killer. Which lamp or light is that? Keep up the great work!
Thank you
@@MikeRussell any ordering info on that red light/lamp?
Great review.
Thank you, I'm glad you found the review helpful!
Very exciting!
It's a potentially totally new direction, very exciting
Toyed with buying one of these purely from reading reviews first, which I usually do. After watching this though, no brainer.
I do a bit of everything from digital music production with various DAWs and Audio/Video packages (Adobe, Soundforge etc) to Techno mixing/DJ'ing (both old skool turntables and DJ controllers with spinning platters of course cos i'm old) and I simply love anything audio and video. I have the H5n you have as well as the H6n and a Roland. Same with mainly action cams too. I do really need a recommendation for a DSLR for a stationary setup (no, not pencils and paper) ;)
Sadly, you won't find much of anything on my channel as I worry about the whole "12 years ago Jamie said this at the time, perfectly acceptable in context word, so now he must ne retroactively punished for it" although as the digits flip on my age counter I start to worry less and less about this due to career as some of the content I do produce can cover issues of privacy etc. Basically, love audio, video and music creation but hate the fact it can and is used as a stick to beat people with now, let alone the coming future.
I just found your channel today. You got a new sub and made my bank balance take a multi hundred £ hit so cheers for that. In a way you also screwed yourself over because I don't have any money left to give you and pay the soon to be astronomical heating/food bills. Just good i'm one of those fussy eaters who, in human terms would probably be classed more like a mouse, nibbling at snacks when I find them (5 second rule).
Keep it up though. I like your style. There's probably hundreds or thousands of comments on this so I have probably wasted 10 minutes thinking about all this crap. It would have been easier to make a video with my
I've just decided to take the plunge and chuck out a D&R Airlite and DBX 286s amongst other stuff. The Airlite's built in interfaces have been cracking like mad too with random clicks and pops on the audio. So I've ended up putting analogue interfaces back in. And then they play up.
Anyway, it's all going for a Rodecaster Pro II so to see you've done exactly the same thing seriously reassures me!
👍
Muchas Gracias!
Great video mic! I'm thinking of upgrading my RCP 1 now. what was the music bed you played on loop at around 09:55 minutes?
Thanks Dan! That's our MRC Gaia jingle music bed 😉 musicradiocreative.com/products/mrc-gaia
A question about the MTK mixer in terms of multitrack recording, is the USB tap point after the pre-amps or pre/post fader or after EQ.
The USB outputs are post fader and Pre-EQ
@Mike Russell, I don't need a end colloring of the sound, because there is endprocessing/coloring
can it replace a stereo preamp? What if you connect the balanced outputs to an amp (not an integrated amp) to power the speakers? Will that work?
Having had the mixer, do you think that the number of inputs is a limitation of the rodecaster pro 2? I have a Clarett 8 pre usb but unsure if it is wise to sell it as I would be limited to two stereo pairs in on the RodeCaster. Your opinion would be very much appreciated.
It totally depends on your usage, it's certainly not suitable for all uses due to it's limited inputs but that's not what it was primarily designed for.
Great review, is it possible to use RCP2 like a real mixer connected to Power amplifier speaker , I'm asking this because I don't see XLR output and I'm not sure output via TRS jack are good for no noise?
It’s not designed for that purpose but could be used if connected to an amp via the TRS jacks.
Awesome video, Mike. Although quality of the audio through rodecaster is below average comparing to your rich, deep, into-the-ears warm sound through your usual set up. So don’t disregard that too soon. Cheers!!
Yeah Mike....I noticed that too. Is there a solution? Thanks.
Sounds like the compressor/limiter.
All he has to do is figure out the correct mixing settings to get his old sound levels onto the rode podcaster.
Hi Mike, Love your videos! Question for you... is it possible to add extra microphone inputs via a daisy chain or connecting another Rodecaster II? Occasionally I do a live event where we need 4 mics for the guests but a separate mic for either a host or walking around taking Q&A questions from an audience. We don't have a big mixing board so I've been using the original rodecaster to record and live mix.
Ideally you'd want a mixer with sufficient mic channels
well.... I think I need this. I only use a mic and an old focusrite to record songs. Then started podcasting... this made that way easier. I gotta try this
👍
what loop file did you load into the device, is it Wav or MP3 file? as far as i know that MP3s can't loop but Wav is
Thanks it helps 🤝
You're welcome! Glad I could help you out!
Great video thank you so much 👍🏻💯🎤💻🎶🎧🎙️🎵🖥️⌨️📻🎧📀
Thank you so much for watching, I'm glad you enjoyed the video and found it helpful! 🎧🎤🎶
I don't know the product, but your review is pretty convincing. One small bit which I think will definitely do the trick for me is 32bit float audio recording, at least on mic channels. And they got me in 100%
It's a great feature but if you've set your audio levels correctly you wouldn't need it at the mixer stage
Will it replace Zoom V3 Vocal Processor, Harmony, Pitch Correction, Reverb, Delay, 16 Studio Grade Effects? Merry Christmas Thank You
Great video🙂👍
🙏
Password is correct, link is working so does the application. Thanks! Deserves likes!
Hi Mike great info thanks, good to hear you like the PCP2. Could I ask what 'Camera and lense' you are using? The quality is terrific! Many thanks!!
Thanks! I'm using a Sony Alpha a6400 with a Sigma 16 mm F1.4 lens.
@@MikeRussell Thanks Mike, that's brilliant really appreciate it, going to order that lense right now..keep up the great work!!
Hey Mike.
Great video - as always 😊
One question.
Would you juse it as a broadcast-mixer for radio? Can't find any information anywhere, that gives an answar on pfl/cue on the channels?
Cheers!
The Rodecaster Pro can do PFL and I'm aware there are people using the RCP1 and probably RCP2 as a broadcast mixer
@@MikeRussell Well then 😁 Take my money RØDE ...
Wish you and Isabella a great summer - keep cool over there!
Thanks Martin
Great review Mike.
As an user of the original RCP, there are several things that I didn't like in the new unit.
First of all the original RCP much more podcast oriented, not all around gear.
It's bigger, with 8 faders not 6, and it's have the blessed TRRS input that the current is lacking.
The new RCP 2 certainly have updated capabilities, but I still prefer the original.
Good job Mike.
Each to their own 👍
Faders are re-assignable in RCP 2. Do you always use ***8 faders*** simultaneously, that you must adjust in real time ?
RCP 2 has 3 virtual faders. So 9 total faders (at this time)
"certainly have updated capabilities" : yes, you can tell it like that :)
The list of improvements and differences is really impressive (and in constant evolution)
@@photographiezautrement personally, I like physical measures instead of virtual.
I understand your point.
The original RCP has the correct sizes and proportion, the new one got smaller and slimmer.
Again it's a matter of personal experience, and taste if you like.
With the loop issue have you tried different file types as the other day I was having a similar issue when looping mp3 from serato to obs but when I exported my loop as wav instead things sounded smoother with no gap or pause
It shouldn't make any difference what format it's saved in as long as the file is the same file
What kind of USB C are you using? I can only find ones from like 1 or 2 meters but both my computers are pretty far way from each other. I'd love to have 5 meter or longer USB C cable but I don't think those cables will have the same speed as the 1 / 2 meter ones.
You are safe up to 1m with no reduction in speed, past that they will still be operational but with possibility of speed reduction.
😍Thank you very much Mike for this great comparison test video and ultra-complete demonstration of the RØDECaster Pro II against your analog equipment at the Top!!!
👻Thank you for including your professional impressions, your neutral and true opinion on all your analog units and your nice ideas suggested to RØDE for future updates of the RØDECaster Pro II
I did well to wait for the L.A. Namm in early June - thinking that RØDE was probably going to release a new version 2!
👍BING Spot on - I'm as happy as you Mike to have it with me - But I was also eager to see your detailed Professional press review on the RØDECaster Pro II
🙏Thanks again Mike and have a great summer vacation to rest your ears LOL!!
🎤The RØDECaster Pro II, a superb product almost revolutionary in the production of online radio show music podcasts all portable in so little space for a sound quality Never heard !!! Kudos to the engineers and developers at RØDE
🚀EXCEPTIONAL YES 🚀
(Franck From French Riviera) 😍👌🌈🎹🎶
Thanks for your kind words Franck 🙏
Hi. Can I use the Rode Rodecaster Pro 2 together with the Symetrix 528e, or is the Rode sufficient?
I now use the zoom f8n in combination with the symetrix 528e
Great you could use either combo but RCP2 will be fine!
Mike’s voice is so well trained
Thank you
Awesome love it, another great video, thank you.
Would love to see some follow up videos how you dial in the sound and all the processing. I’m sure many of your subs would get a tremendous value seeing your process and set up .
Perhaps could be another product idea… Mike Russell RCP2 presets 🤔
Thanks Russell
The Video is informative and well presented. The Audio in this presentation is it directly recorded from RodeCaster Pro and uploaded? The volume is very good with the punch in the voice profound. If you have used further processing after the Audio output from Rodecaster, can you kindly share it with the viewers?
Thanks
Thank you for your kind words! Yes, the audio in the presentation is directly recorded from the RODECaster Pro II.
Thanks for your quick response and you have inspired me to know more on the subject.
I have Rodecaster Duo which is identical to RODECaster ProII as you know and I experimenting recording on Mac Mini 2. I am not getting the level of volume as in your presentation. Can you kindly share as to how to reach the same Audio level as in your CZcams presentation? I record using Audacity (some times on Audition). Your guidance will help me a lot. Thank you!@@MikeRussell
So how do the preamps compare to the preamps in your soundcraft mixer and the focusrite scarlette?
I have always used the dbx286s when connected to the 2i2 and the Soundcraft. The Rodecaster Pro 2 I am connecting directly to
MIke.....I thought you'd be interested in my experience thus far with the RCP2. I purchased my first unit about 2 weeks ago and have had to return because the larger 'volume knob' is not operating. It's clearly off it's track and will hardly turn. The second unit I purchased arrived with several issues in assembly. First, the touch screen monitor wasn't properly seeded in its housing. I carefully centered it and pressed on it and it seems to be back in place. A second issue was the metal behind the faders rubbing on the faders when they were adjusted. Again, after pressing down on the entire plate in several places, it seems to have snapped back into position. The build quality on the RCP2 units is inferior to that of the RCP1 in my opinion. I love the new features but this thing feels like it will break if you sneeze at it the wrong way. As I told Rode in my email, I would gladly pay another $100-$200 USD for a "Pro" unit. I'd love to hear your thoughts on this. Also, please pass along to Rode if you have their ear.
I'm sorry, I forgot to ask you where's the dedicated play button. Hope I wouldn't have to go in the menu screen. Or would I be able to assign one of the side buttons as a play button? Thanks again for your help.
I love my RCP2 - it really is brilliant.
👍
@@MikeRussell Also I would like to add that I completely agree with all of your feature requests. I hadn't even tried looping audio on the smartpads yet, so that's good to know. I know you probably didn't want to get into it in the video itself, but may I ask what firmware version you were running when you recorded this? I just pulled down 1.0.7 beta firmware just the other day, but haven't had a chance to really test through it yet due to schedule. So anyway, just curious.
This was the recorded when the desk was freshly released with the release firmware
@@MikeRussell Gotcha. I tested it and it still happens with the 1.0.7 firmware, and i've submitted a bug report to Rode about it.
What is the round trip latency in this interface? I'm considering getting one but I'd like to use it for electric guitars as well, using Amplitube (or similar) in real time. Would the performance be comparable to audio interfaces like the Focusrite ones?
Latency is also going to be dependent on your hardware you're connecting to
@@MikeRussell yeah, no doubt, but the interface plays a big role.
It seems like it just needs a Direct Monitor button to allow the unprocessed signal through to your headphones, but the processed signal for everyone else.
The recap part of the video reminded me of The Gadget Show's (on channel 5) giveaway section.
🤣
Can you use this with automation? So u can program the rose caster to trigger and adjust the faders automatically?
No, that's not a feature
Good review,
Seriously though why EQ on the master? Shouldn't really be messing with program audio eq...
It should be an option
Nice video. Does the RODECaster Pro II latency bother you?
No 👍
I was looking at the Rodecaster Duo, but no HI Z for Bass and Electric Guitars. The Rode does seem the most intuitive of these new class of mixers. Do you have any recommendations?
While the Rodecaster Pro II does offer impressive features for podcasting and voice recording, it may not be the best choice for handling bass and electric guitars due to its lack of a high impedance input. For recording those instruments, consider exploring mixers with dedicated HI Z inputs, such as the Presonus StudioLive series or the Mackie ProFXv3.
@MikeRussell The Mackie is definitely on my short list. Thank you kindly for your reply.
Could the Pro2 be used to run small church system? We only use wireless mic and podium mic and feed audio from iPad for music? Also looking at behringer xr12 or use together.... We record to FB and CZcams video and audio.... Afternoon study we want audio only to record ....thank you for your opinion
The RCP2 could be used for that as long as you're only using one external audio source
Hi Mike! I just got this caster pro II recently.
May I ask you a question?
Is it normal to have the very noticeable "hiss" sound on this device?
when I took the fader volume up even there's no mic on that channel?
I put my mic on channel 3 and every channel have the hiss including my mic
all channel can hear the hiss when the fader hits above about 30% (set to about 50dB)
is this normal?
becase lower the gain would lower the hiss, will I get better using a condenser mic? since it doesn't need so much gain...
I tried putting my mic into a closet and I'm pretty sure it's not only just ambient noise.
There shouldn’t be a noticeable hiss on a channel with nothing connected to it.
I got one and I have a white noise hiss with nothing plugged into it except power and my headphones. Actually, if you mute all the channels it will be dead quiet, but then unmute your MIC 1 channel and you will hear the hiss. Same with any other MIC channels. I had to return mine because of it, too much noise I couldn't isolate/remove :(
@MikeRussell sounds like a really cool device. I would really love to test it out, but unfortunately, I don’t think I would be able to use it, since there seems to be lots of options and stuff you have to select, and for me that wouldn’t be very accessible. So for the time being, I would just have to stay with my analog equipment, which has knobs and stuff which I can actually turn and buttons I can actually feel. Plus, it is out of my budget range, and I’m not sure if you have to see the screen in order to select different options.
If you have a setup that works for you then I'd recommend carrying on using it 👍
I like the saving the planet move with the rodecaster 🤣
👍
May I ask you Mr. Russel to explain, how do you avoid mouth noise? I tryed everything. :/ Your voice is always so clear.
Some suggest that eating an apple can reduce mouth noise 😀
Can you record a vocal on fader 1, on the internal SD card, then add a harmony part after on fader 2? Like keep overdubbing? Or do you need a computer for that?
I would recommend doing your post production on a computer
@@MikeRussell Recommend yes, but can you do it just on the Rode?
When this video was released the dt700 pro x had only been around for less than a year. Yet you say in the video that you have been using them for years. Did you mean the dt770 pro by any chance?
Mike I'm a streamer on Twitch. Is it be able to do virtual channel routing so I can assign them to OBS. I like to have independent control of system sounds, Spotify, stream notifications sounds, game audio, Web browser audio. Currently I use virtual cables to do ALL the above. Will the Procaster cater for all of that?
You may want to look at the Go XLR mini which would do what you want to do and is a cheaper solution
super pro review!
Thanks 🙏
i know this product is podcaster/youtuber centric but i see alot to offer to musicians and other unintended uses here looks like a nifty piece of kit, rode definitely onto a winner here.
It's a very versatile product
@@MikeRussell Most Definitely, thanks for bringing it to my attention, great video.
Rode stated they designed it for anyone needing to interface with their audio.
Good morning,
I heard there have been some updates to the rode caster pro 2
Have the problems highlighted in the videos been corrected? If yes, which ones ?
Which ones still need to be corrected?
Hoping the rodecaster continues to get updates.
Good day
Good morning! Yes, the RODECaster Pro II has received many updates although I currently use the Mackie DLZ Creator.
@@MikeRussell Hello, thank you for the response. So, there have been no updates regarding the RODECaster as mentioned in this video?