[FASTEST WAY] Programing liftmaster remote to chamberlain garage door opener

How to program your liftmaster 893MAX garage door remote / transmitter to your chamberlain garage door opener.
Quick video (only about 30 seconds) to make your garage door opener to LEARN the signal from your handheld transmitter (remote control).
VERY EASY!
If you need to buy a garage door opener, please use my Amazon link below:
amzn.to/2YCaZa2
#liftmaster #893max #garagedoor

[@mariagandarillas8162]

I had tried many different controls, and followed the instructions and doing exactly this worked! Thank you! You have made my life easier, and for that I am grateful.

[@juancalvo4149]

Thank you ( Gracias) Short and Simple instead of 6 minutes of Bla, Bla,Bla to tell anyone how to program the Garage door opener ✌️☮️👍

[@coreyltaylor81]

Thanks! Worked for me just as easy. Quick and simple. 😁👍🏾

[@nagolhayze9366]

Thank you for this most helpful and straightforward video, a great help.

[@breannaday2938]

I did it the first time and it worked perfect!!! Thanks

[@momsolace]

Thank you for the pro tip that was really helpful especially if you just purchased a home and the previous owners had access with a different clicker. That way it can be reset.

[@bobmoy4569]

DIY, you made that so easy! Thank you!

[@sassypants66]

Thank you so much! Worked like a charm.

[@ericlam2112]

Thank you so much, it’s so easy

[@learningcommercialreal-est1452]

Thank you your video helped

[@michaelberezhkov9690]

Thank you for the simple explanation!

[@jamesg1425]

Lit, thank you. Made it easy 🙌🤙

[@H.O.R.S.E]

Thank you - it also works with a red button!! ❤😂

[@phewfthaboi274]

Thanks brother!

[@Ezloh]

Did this while drunk helping dad best tutorial ever....

[@mrsig7381]

Thank you! 👍

[@christiansmith8494]

thank you so much

[@unaquetzadilla]

Do you know which frequencies does it accept?

[@shrimpinpat]

Same process for a car with built in remote?

[@EddyV9]

So I been doing research everywhere and can’t find the answer to my problem. When I program the remote to my garage door opener it takes 4 clicks to open and to close. I’ve tried different remotes and it’s the same result I just don’t understand why. I’ve erased the openers memory and reprogrammed the remote and same result

[@galvansjr5940]

Same here .

[@cristiancaraballo6108]

Might have a bad motherboard

[@robbyd4182]

The light is going to do something huh?? Like a magic trick or something?

[@jeffreysilverman3633]

Tried this just now. Did not work.

[@thanostimestone6813]

5

[@epicoolkid]

Didn’t work

[@theshedproductions.]

There’s a faster way and more easy to do

[@DIYGEEKTEXAS]

Please share your faster way

[@theshedproductions.]

@@DIYGEEKTEXAS ok, many liftmasters on older types such as your have a light and open/close button, so what you do is take your remote and at your wall button press light and open/close button at the same time as the remote and the lights will flash accepting the code press door button with light and remote button all at the same time, works relatively the same, very recent models they have a built in learn button on the button, sadly only works with liftmasters, chamerlains, and raynors, and ones with a push button you cant program to

[@DIYGEEKTEXAS]

@@theshedproductions. i see thanks for letting us know

[@theshedproductions.]

@@DIYGEEKTEXAS youre welcome

[@andrewford743]

Nah eff that! You're way to nice to this "Jacob's wanna know it all"
This fool really said there's an easier and faster way to your pressing one button one time then a second button one time. His way was pressing two buttons simultaneously then pressing one button on two devises simultaneously.... that's not easier or faster

[@Jack-nh8me]

Bad explanation