Bench Grinder Tool Rest/Platform
Vložit
- čas přidán 3. 03. 2024
- In this video I build an adjustable tool rest/platform for the bench grinder. The original tool rest that came with the grinder was almost useless as you could not adjust the height or angle.
Thanks to Matty from Matty's Workshop for posting his tool rest video - • Bench grinder tool rest
That's a neat and functional project, it does seem all modern bench grinders have hopeless tool rests,
Thank you. Yes, probably due to keeping costs down. A stamped single plate would not cost much to produce compared to an adjustable rest.
That sir, is both simple and very clever. A sign of good engineering. Well done - I'm making one of these for sure.
Thank you for your kind comments.
Someone commenting went on a rant about buying cheap Chinese crap. Fact is,... even the best grinders deserve the features John incorporated here. Since damn near everything we do in our shop requires a sharp edge, .. the time spent fabricating holding, guiding and fencing will reproduce satisfying consistency!
Thanks!
Wakodahatchee Chris
Yes I saw that. Basically the grinder works absolutely fine for sharpening my chisels etc. All it needed was an adjustable table. Maybe that person purchased something in the past that did not work out well for them?
Thanks for watching.
it is chinese junk. ive got an old grinder, probably 50s era. the base on it has a REAL rest. solid lump of cast iron. fully adjustable. even has little water troughs... you cant buy them anymore. everythings this flimsy, standard design, mounted on the pressed steel guard. even the freakin flanges on the spindle are pressed mild steel now, versus this old thing with its chunks of cast iron.
theres a reason some of us go a bit ga ga over old machine tools, from an age when machining was taken seriously...
It's nice to see that someone makes a bench grinder with wheel guards that are thicker than sheet metal.
Yes, I was quite surprised how thick the metal is and how sturdy the guards and cowlings are. I have a smaller (different brand) grinder and the material is quite thin. Thanks for watching.
@@thehobbymachinistnzI've been wanting a better tool rest for a while. I'll probably make one like yours. And if I can get some cheap/free 11 gauge steel I'll make better wheel guards. Anything that bolts to the guards will benefit from them being sturdier. I also like that your guards have welded-in bolts so that you just undo a few nuts. My guards use tiny screws that I'm always dropping. And I'll probably use thumbscrews or knurled nuts there so that I don't need another tool.
@@mk6595 Sounds good. If you cant make the guards stronger, you can always mount the rest to the bench rather than the grinder. You should still get all of the adjustment flexibility if it is bolted to the bench.
What a fantastic job. Really neat to see how you work and plan your project. I learned a lot here.
Thank you 👍🏻
Glad you enjoyed it.
VERY NICE! You could make a kit for that and it would sell like crazy. Every shop needs a product!
Yes, that could be done. But, I do have many of projects on the list which I need to do.
Nice work. It's a good mix of fabrication and machining. The adjustable tension knobs are a nice touch
Thank you.
What a lovely job, well done sir!
Thank you kindly.
Gday John, that really turned out great, thanks for the shout out mate, cheers
No problem Matty. It is only fair to give credit when I have got ideas from other videos.
Nicely made and looks easy to set-up. I've suffered with the stamped tin rest for years. Ought to follow your example and make a proper rest.
Thank you. I recommend making one as you have more control for accurate grinding.
Good work. I definitely need to upgrade the tool rest on my belt grinder. Will definitely be using some of these concepts.
Thanks for watching.
Looked at the other two Matty and Blondihacks turns out your grinder has the same rest as mine l, the only difference i had two bolts instead of a bolt and pin.
I will be copying your rest it looks a sturdy and serviceable piece of Kit.
Thanks for the video good job.
Thanks and no problem.
Done drawings yesterday and decided to get the plates laser cut, i was surprised at how cheap it cost AUS 4.95 and that was for two sets.
@@Bigbigjimbo That is really cheap.
One question, i see on the table adjuster you have welded something to one side, what is it.
@@Bigbigjimbo Good spotting. I did not show that on camera, but what I did was weld some small pieces that stop the bolt head from rotating. Otherwise you would need a spanner to hold the bolt head while you tightened and loosened the table pivot lever.
Your tool rest is very awesome! I am going to make it!!
Thank you.
Very nice work. Thanks. I need to build something like that at some stage. Gave me a few ideas.
Thank you and no problem.
Nicely done!
Thank you.
Thanks for the video. I want to make something like this and you have given me many good ideas.
No problem.
Nice job! I've done a couple of similar but with the sliders mounted to a block on the base rather than brackets off the guard. And a thin table with no slot. I like the slot and might upgrade one or two of them like this.
Thanks for watching.
Very nice work
Thank you.
That turned out great - I really like the radius tool you made for your belt sander, I'm going to make one :)
Thank you. Unfortunately I built that before making YT videos. But if you want more info I do talk about it in my video titled 'Shop Made Tools & Upgrades #2 - 2x72" Belt Grinder'.
@@thehobbymachinistnzThanks, I'll check it out
nice work!!! Thank you 👍
No problem. Thanks for watching.
Hacksaws and files are cheaper than milling cutters.
Many thanks.
Yes they are. Thanks for watching.
Well done!
Thank you.
Very cool! It looks great and seems t o be very functional.
Thank you.
Very nice.
Just need a mill and lathe now 😀
Thanks for watching.
Excellent 👌🏻
Thank you! Cheers!
Brilliant!
Thank you.
Next project new vice jaws ! 👍🏴
Not the next project, but they are on the list. I have actually already cast the aluminium.
Nice job, mate. The extra mass of what you built will help stabilise the action on the wheel, too. Even if the cover it's bolted to is jot particularly rigid. That gun blue works great. I will acquire some for myself. Cheers :-)
Thanks for your comments.
@@thehobbymachinistnz Hey, looking around I only found small starter kits with tiny bottles - from whom did you buy your large bottle? Thanks in advance. :-)
@@fredio54 Hi, I got this bottle from Delta Mike Ltd. Are you in NZ?
www.deltamike.co.nz/product/birchwood-casey-perma-blue-liquid-gun-blue-32oz/
@@thehobbymachinistnz Cheers, mate. I'll dip some number 8 wire in it once it arrives. ;-)
I like it. I made one for my cheap bench grinder but it gives me nothing but trouble. I'll try this one, or a modified version :) Subbed too 🙏
Thanks for the sub.
The groove on the bracket you chucked in the bin, I've always wondered what its purpose was, but as you threw it i thought it is probably for putting drill bits so you can grind the face once set at the right angle.
I think that groove is for sharpening drill bits. The problem is that you could not change the angle of the original tool rest. Although the angle of the groove in the rest may be correct for the point of the drill bit, you really need the ability to grind a back relief from the cutting edge of the drill bit. I plan to make a drill bit sharpening jig for the grinder, along with a video. But that could be a few months away.
That will be a lot better than that flimsy original one.
It sure is. Thanks for watching.
Brilliant 👍👍😎👍👍
Thank you.
Great video ... I am in the process of building such a tool rest myself and this was very valuable information. About the "AEG" grinder... I really hate to tell you this but this grinder doesn't have anything to do with the Allgemeine Elektricitäts-Gesellschaft AG (AEG) of Germany. Electrolux bought the rights to the orl AEG logo and for a decent fee, any company can buy the rights to use the logo from Electrolux. In essnce, this means you are better off with the similar no-brand version, as the manufacturer will usually take shortcuts with branded version to compensate for the licensing fees... (used to work in inbound IPs, so I know how drastic those shortcuts can sometimes be).
I'm glad the info is helpful.
Funny you should mention that about AEG. I recall when I was looking for an 8" grinder there were several different brands of this exact same grinder. I thought that AEG were making them for other companies so they could be rebranded. It looks like the case here is that this is a generic grinder where AEG and a bunch of other companies put their own brandings on them. BTW, I only brought the AEG branded grinder because it was about $20 cheaper than the others, plus it had an extended warrantee for 6 years.
@@thehobbymachinistnzThe 6-year warranty is worth a lot! BTW: you can extend the life of the grinder and the quality of the ground surfaces quite a bit when truing the wheels(s) with a diamond every once in a while... some people invest in better bearings and better padding between flanges/washers and the wheel. Everything that reduces vibration has a positive effect on the quality of the ground surfaces. I'm lucky to have access to this marvel at work: czcams.com/video/FYWiIVCnr4s/video.html - total game changer!
Yes, if its old and made in germany its a good machine, all the new ones are mostly cheap chinese tools
Well done I will make one similar for my bench grinder. By the way its great to hear a kiwi accent on CZcams
Thank you.
Thanks. I converted a cheap grinder to be like the Sorby Pro Edge a few years ago. Hope you don't mind if I borrow your angle guide attachment idea, it's a good one.
No problem, go for it.
Pretty awesome platform. Did you consider a dovetail for your horizontal sliding angle guide?
Thank you. Yes, I did think about a dovetail, but I don't think it would be useful in this case. The slider just moves from side to side so it does not need to be in a dovetail. A dovetail would just prevent lifting out, but that is not an issue when you are holding the tool that you are sharpening down onto the tool rest.
love your work. thanks for the reply.@@thehobbymachinistnz
nice
Thanks.
Nice result, I've watched a lot of Matty's videos but don't remember that one. On another note, did you happen to see part 2 of my version of your Spin Indexer yet?? It got a lot more views than I normally get in 3 days. Once again, well done on the grinder tool rest. 👍
Thanks. Matty did his video around 3-4 years ago. You can find it if to search for grinder on his page.
Yes, I started watching your video while mine was compiling. The project looks to be coming along nicely. There are a few things to make on the spin indexer so they do take some time to make. Thanks for the shout out again.
@@thehobbymachinistnzI must dig through Matty's and find that then. You not kidding about the time one can spend making the Spin Indexer and you are welcome re the shout out. Incidentally, have the views of your videos on the subject had a kick-along? Something odd is that Part 1 has had less than half of the views Part 2 has, that's just weird.
@@MyMiniHomeWorkshop I have seen that with my videos as well. Something that I thought would get a lot of interest has not a lot of views. Then, some other video goes a bit viral and I don't expect that. I guess the YT algorithm plays a big part in that?
@@thehobbymachinistnzHard to figure out sometimes. My most viewed video at 62K views is what I consider one of the worst videos I've ever made and something I just threw together on a whim 👍
Absolutely fantastic job, you a toolmaker not a carpenter or both like me, but don't have any tool room machinery. Can you make me one please, will pay of course. 😉
I'm actually a hobbyist. But I like working with metal and wood.
Nice!! Can you paint blued parts?
I don't know. The blued parts have oil on them so that would need to be cleaned off first. You may be better off not bluing and just painting the parts if you want to paint them.
@@thehobbymachinistnzThanks. I wasn't planning to paint but was wondering if chemically, paint will bond to the blued surface as is not a coating but rather a reaction with the underlying metal part.
@@BenMitro Yes, it is a reaction, but I don't know if paint would stick to it or not. It is something that I have not tested. Perhaps someone else reading this may comment?
Where did you buy the blueing compound from??
I got it from Delta Mike Ltd. I am in NZ so you may need to look around if you live elsewhere.
Most gun-shops will sell blueing compound
The movie line sounds like a young Travolta. Grease?
Bang on, well done! I'm surprised no one picked it earlier.
Why isn't this standard on every grinder? Mass produced, this would cost $5.
That is probably the answer. $5 vs 20 cents for the bent piece of panel steel. I would pay $5 more if the same grinder had a decent tool rest. But, maybe a lot of people would go for the cheaper price?
If you have the tools, id take off the stamped steel guard tottaly, and make a whole unit, you can also use a side wheel tool rest on.
The original junk is a cheap knock off of a brand but made in china without any thought for use.
Thanks for your ideas.
you can tell a quality tool when you see it. don't worry about all your time fixing, just keep thinking about all that money you saved buying it
Gotta spend something, and time and money are the same thing
Thank you.
nice
Thank you.