Fitting DRO scales and programming the display
Vložit
- čas přidán 9. 09. 2019
- Fitting DRO scales to the mill and programming the display unit.
Drilling 6 holes on a PCD using the DRO
Banggood 2/3 Axis Grating CNC Milling Digital: bit.ly/2KMiBx9 (code:BG134012 15%off)
Making a mounting ring CZcams • Making a mounting ring
Making a bracket for a DRO display CZcams • Making a bracket for a... .
Banggood13thAnniversarySales#
Shopping Guide: bit.ly/2k0u4Q4
Main Venue:bit.ly/2kxhyrv
Electronics & Tools: bit.ly/2lUYqnE
A lot of brain work to fit the scales and a fine explanation. Well done ! Thank`s !
excellent mill install
didn’t realise you could even retrofit a dro - got a mk1 colchester student that i might convert
Excellent instruction and demonstration, great addition to the shop.
Thanks for sharing.
Just about to start throwing my DROs on my mill and lathe, if the readouts ever arrive.
This video has been a tremendous help.
Thanks Alan
Very informative Alan! Great job on the installation of the DRO!.
Hi folks. There's handy trick when setting bolt hole circles. Add one to the number of holes and set the 'last' hole as 360 degrees. The 'last' hole then aligns with the first one and it saves working out the position of the final hole you actually wanted to drill. BobUK.
Gday Alan, thank you for explaining how to use the DRO in a way that was easy to understand, I have trouble understanding instructions most times because of the way they are written, it helps me if I physically see it done in a simple manner which is exactly what you did, great video mate as always, ATB Matty🇦🇺
Excellent clear and informative instructions...
Hi Alan
Very informative video, as I've never got around to understanding what all the buttons do, I'm getting there!
Thought I'd already subscribed, but now have. The R-F 31 resent buy, was already set up with a DRO, but like the way you brackets were made and installation on the Y axis. Going to follow your method and discard the one that came with it. Thx, nice presentation and well instructed. Bear in TX.
I’ve only got a WM12 so having to make my own brackets and it’s slow going!! Good video. Thanks.
Good neat Job
Thanks for that Alan, keep the vids coming ,great stuff
Regards
Mike
I have similar scales and your mounting idea looks better than mine as the way i did it the scale covers the hold down bolts, also my fuelle on the Y axis is flat rather than corugated like yours so i might just change it and mount like you did as i had to lower everything down to fit the cover at table hight( its hard to explain without seeing it) anyway, good job and well explained.
Thanks I enjoyed the video and I did learn a few things. For the back Horizontal bar you could use countersink screws to keep the retaining screws below the table top. You could also use a countersink screw for the oil hole as well. Thanks for sharing Best Wishes & Blessings. Keith Noneya
Hi Folks, me again. MDRO have a device that will add the readings from two scales together. This could then be fed to say the Z axis is on the DRO allowing both the column and the spindle readings to be summed together and displayed. BobUK
Cool work sir 👍👏
Hi Alan, great video, can I ask ,there seems to be some confusion about how to order these scales of Bangood. Problem being what measurement do you give the supplier , in my case my cross slide travel is 110 mm so I suppose I would have to go up to the nearest size they provide which is 150mm. So do I give them 150mm or do I have to add on any other measurement.?Thanks and keep the vids coming brill stuff,Mike
Hi Mike the size ordered should be the 150mm length the reading length. The scale will be longer just make sure it will still fit at 300mm long
Love your video on dro. I've figured out how to fit a dro to my machine. I've even selected the Chinese model I want. How do you tell them the length you want on the three scales?
Hi you select the length of each scale and the display on the order screen
See my video DRO basics
Hi Alan thanks for making this video, it's very useful. I have the same mill and was wondering if you could please tell me what size scales you ordered? Thanks, Morgan
Hi Morgan. I think I ordered a 350mm and 550mm which have a total length of 500 and 700 end to end
@@enotsengineering That's great, thanks Alan
Hello Alan
Where did you get the correct paint from and is there a colour code. I need to touch up.
Cheers
paul
Hi Paul. You can't a spray tin of paint from Warco ( machine green)