There's a lot of appreciation in these comments for what you're doing. I have to agree. You are creating a lot of value here by giving a "mechanics perspective" on this. Keep up the good work guy.
I hope the dealership where u work realizes that U would be the reason people would buy a machine! Having the knowledge U have is invaluable in today's market! Please keep the videos updated on this series machine if any problems arise as we all will be very interested! Thanks for all U do !
That's what I said ! Your Videos help people somewhat understand , but they Still have to Buy the Parts from Bobcat . Bobcat was not Losing anything !! 👍🇺🇸 !!
This channel and you are world class, literally. Top 1% of mechanical education on these machines. Your subscriber count will continue to increase! Hopefully your channel is monetized. Your intelligence and teaching / explaining skills are second to none. Keep the videos coming out, we will watch every minute. Sincerely, thank you.
Wow great video thanks so much ,my company runs one s870 and three t770 two have had fuel issues and the 870 also blew pump seals and filled the chain case with hydraulic fluid.now all the bugs are fixed and they are great machines.you have really taught a old dog a lot about these machines thanks again bud
I'm glad you stated from a mechanic's standpoint only. After a few short years and so many hours these machines become a bleeding pig to the wallet !!!! Technology today comes with a enormous cost to maintain and repair down the road. I used to service a fleet of g-series 773's. They're all still in service .
I got a G series and have had minimal issues that I’ve been able to service on my own with a couple good manuals. Aside from tracks and undercarriage it’s given me no issues.
So initially I was under the impression Bobcat was going to integrate an auxillary oil cooler into this particular machine for hydraulic oil temperature control. My gripe with all the major compact track machine manufacturers is they say you can run attachments such as a Diamond forestry head or FAE mulcher and the machines will keep the hydraulic oil cool enough to run in summertime. That is not the case in any of the three machines I've tried; Tak, Bobcat or John Deere. Was hoping this machine would solve that problem. Doesn't appear they did that.
They did solve it, and now it’s proven by scores of T86 running forestry heads in Texas and all over the Deep South last summer, I’m talking triple digit heat 8 hour days with fluid temps hovering around 150 degrees. It’s quite remarkable, and why I bought one last week, T86 is now one of only two machines that can claim this with just the factory cooling system, the other is the ASV RT135 but that’s more of a dedicated mulching tractor and riddled with issues. I’ve personally kept in touch with around 15 guys running T86’s for the last 12 months and ALL of them have been bulletproof. Phenomenal machine.
@@TheOMEGANOXHow do you find the cockpit, it looks a little sparse. I don’t care about coffee cup holders etc, but seat comfort, controls and noise etc.
The review is well done and informative. Similar to competition the serviceability in the engine compartment looks absolutely brutal. Also, I am not a fan of the rear visibility on these Bobcats either. You can’t see behind you for love nor money same as prior Bobcat models….and this is very important if you’ve spent any amount of time operating these machines in the real world.
I’ve been more impressed with the past Kubota engines than the newer Doosan engines. Our S570 air box cleaner is such a pain, and the fuel rail shows so much rust, yet we don’t use it in winter. But our older T590, powered by Kubota, is night and day better..just seems like maintenance overall is easier. BTW, your videos are great learning tools.
Started following you a few weeks ago as I have been getting more into skid steers on CZcams and they recommended you. I am glad they did! Thanks for this video, can't wait to watch it! PS I would love your thoughts on the small 463/S70s, I haven't been able to find any videos on those specifically on your channel.
@@tetradgroup My other question is in regards to America's supply chain issues. Do you see our supply chain going back to normal anytime soon or we have to wait till Trump gets back in office?
Wow, your CZcams poped up on my feed, I remember you from school in Denver! From Utah it’s Paul who sat behind you man, hope all is well love the videos
Can you please make a short video about the operation of the t870 hydraulic track tension system? I put new tracks on mine and i want to understand exactly how they are supposed to function during and after track changes
I got one on the way. Its taking a long time. I'm excited but a little bummed by the loosening 12" of lift. I've got the new 48" planer sitting in my shop all lonely.
Great video. I don’t think I’d have the patience for the tight quarters trying to change hoses etc. but that’s on all skid steers not just this one. They have to pack 10#s of poo in a 5# diaper. !
I’m looking to buy a t770 with the Diamond 48 disk mulcher. I figured the 48 may be a little easier on the hydraulic system would like to go a little bigger on the mulcher but I am scared. A lot of videos show the overheating issue and I’m just not sure. Not holding you too anything but what is to be expected with the combo I have picked out haha . Are there any major issues with the 770?
Looking to possibly replace my 2018 T770 with one of these, current Hrs 2600. I've been told to bump up my case drain to a 5/8 line straight to tank. and run 1" lines to my couplers. also have a couple guys telling me to crank up the main relief valve. I mainly forestry mulch and stump grind. But if I'm beating a dead horse and its time to replace the machine I'm curious of the case drain line size on the t86 also concerned with debris getting into the belly pan. Not uncommon to find mud holes in my line of work. Not sure if its best to fix up what I have now or try one of the R series out.
How could you run a mulcher with hydraulic hood when the auxiliary is only two hoses? So you wouldn't have a second auxiliary circuit to use the hydraulic hood? Thanks
I think the newer Toolcats also have the Delphi fuel system. Would you call the engine in these new Toolcats a V2? Is the Delphi system a significant upgrade, in your opinion and, if so, can you so more about why? Appreciate your videos. Thanks!
17:11 Do all the various case drain lines, including the auxiliary case drain line, all feed into a common manifold first like they do on the T770 and T870?
Wonder what durability is on the new machine. My buddy bought a t76 and has trouble every time is gets wet. It starts throwing codes bobcat could not fix it so he had to trade for another brand.
Not sure but that is an interesting question. I will look into it and let you know if I find anything. I would think it would last longer being the same size but more efficient engine that runs cooler due to the new design.
Seeing a T86 I would have major concerns on its design. The T86 has exposed driveline motor lines on the underside of the machine. When mulching they will get broken. The T86 has a grate on top for air intake instead of a precleaner assembly. The air cleaner will clog with dirt quickly in dusty environments or while mulching. What looks like a serious concern to me also is the location of a good portion of wiring harness and the Ecu being located on the bottom of the compartment. Any of us who have owned track loaders know that mud and water finds it way into the bottom of the compartment. Its ridiculous to place it there. What do you think will happen to the Ecu and connectors when you get stuck in deep mud or a creek? How could Bobcat finally design a well built machine capable of mulching with the right pump and good flow only to completely F up and make critical design mistakes like the ones I mentioned. When a company is completely disconnected from the end use this is what happens. They got it right in so many ways but then totally screwed up on critical machine killing details. Thanks for taking the time to make the video to show us the machine though. Very informative.
Well, it will use 1 tank of DEF to every two tanks of fuel. This is more frequent than the M Series due to smaller tank and the fact it does not have an ERG which requires more DEF to remain emissions compliant.
I see the engine is packed in there, we 100% forestry mulching, how easy is it to keep cleaned out?? Looks really hard, would love to get away from our Cats.
Hey HowIDidIt i have a T86 throwing code C10A5-16 Pump Case Drain Hydraulic oil temp out of range Low. I was running my stump grinder when it did it. hydraulic fluid is full and hydraulic temp is right at 125 degrees when it happened, is that to cold and maybe whats causing the issue? The dealer checked the OHMs on both temp sensors and it was 745 (supposed to be normal) I guess. They cleaned out the hydraulic fan solenoid as it seemed stuck and to cold for running temp and seems fine now after being pulled and cleaned. What is your opinion is it pops up again? thanks!
Out of range low is possible loose plug at sensor or wiring issue. The case drain manifold under the cab has a filter on it, there you will find a couple temp sensors. Check connections or swap plugs and see if code changes.
@dillon40R depends on the source of the issue. If it's a bad sensor then the code would change to motor case drain temp code. If it's wiring then the code would not change.
Glad your issue with Bobcat settled down, you are a great ambassador for them. Good ridden to Delphi! I hated thier electronics on GM products. I will always have a sour taste in my mouth for them. That thing is a beast
The mechanic, now or soon getting paid sales commission I'm sure. Bobcat has a new dealer here in Oklahoma and all of their equipment is innovative and top of the market for sure though.
There is definetly some weird stuff going on. Calculated hydraulic hp on superflow is greater than the engine output which is just not possible. Intersting
If the machine were running at max flow over relief pressure, I'm calculating 99.5 hydraulic horse power. That would kill the engine but the engine is rated at 105hp.
@@tetradgroup I wonder at what point does the superflow even matter? My tl12r2 high flow is 40gpm and produces 84 hydraulic hp with 115 hp but can still stall the motor with the mulching head. So is super flow even worth it because the power is unusable?
So If they built the machine bigger Then the room to work on would make it easier With a release to take the cab out of the way Modern battery to tuck it away nicer Sure all improvements = more $'s Theres a bit of competition now with other brands But in time Improvements will get better Like travel with super flow on Its probably like closing a value on the travel speed to maintain pump flow They haven't figured that one out yet That cab lift didnt look smooth Perhaps a cab lift that can tilt all the way over to where the roof sits on the ground An engineers dream job Thank you
Main issues I have with 299s are the final drive hoses being exposed between the frame and the drive. If this machine will be in the woods how does it look between the frame and finals? Need to see the guarding there please.
LIke almost everything made these days … instead of making things bulletproof there is the desire for more complexity. Ultimately it leads to lots of expensive repairs and frustration. KISS should be the engineers motto …
Wow hope that thing never breaks down, It's so jamed up in there how the hell do u ever fix anything without taking half the machine apart. just my 2 cents.
Oh my god no space to work on this machine, hoses are every place and all the electronics! Not an owner operator friendly machine. May work assume when it is working but it will need to be repaired and owner operator is out of the game. If one is only an operator this is the machine to operate.
Seriously? If a display staying on is the best example you got of a common failure you deal with to share, that problem hardly condemns the series as junk. Especially since stay on issues are so easily diagnosed. 👊
@@jaxturner7288 no the r series suck lmao a brand new machine should not have this many electrical issues. The cabs are heavier on the the design of the air box for the ac is bulky and awkward to lower the cab can be a pain by yourself. The battery location can be a pain. The main harness where it goes through the firewall can be a pain in the ass. God forbid you have to replace a left awash plate sensor that’s a total bitch to do. The def injector is a pain to get to. V2 engine analyzer isn’t the greatest tool to help trouble shoot those engines. As far as leak back test on those injectors good luck unless you make your own fittings to plug into the injectors that will cost you about $100 for just the fittings. The oil filter locations make catching the excess oil a pain. More than likely there will be a mess to clean up. The push lock hydraulic hoses are a pain in the ass to have made at a local hose shop. The fact that most of the new ones run blue hydraulic oil now sometimes red means service techs have to carry more oil. Yeah all in all they suck. Go work on them for a change and tell me what you think.
@@jakestover9482 I remember my first week fixing stuff and thinking everything is difficult to work on as well. Welcome to the life of fixing stuff. None of it is easy or convenient. 👍
@@jaxturner7288 🤣 not my first week at all but right on boss man. All in all the r series are still junk ass machines that’s still what this is about. I guess they are better than a JCB but other than that they suck. I’m sure you’ve worked on way more things, different product lines than me 🙄🤣.
@@jakestover9482 just messing with you but seriously, heavy stuff and components that are frustrating to deal with are a constant and expected part of the job. May as well just get used to it, over it, or out of it. 👍
Wow that air intake location looks like it will work a lot better. Also, how often is the case drain filter supposed to be changed on a T76? And what happens If it does not get changed? Thanks for the great videos
@@pigslayer106 nope, especially on the older machines with old style metal case drain filters but I wouldn't worry about it with a spin on filter as they are much better. I haven't seen blown seals since the spin filters came out so that would be an extremely rare case but possible none the less
There's a lot of appreciation in these comments for what you're doing. I have to agree. You are creating a lot of value here by giving a "mechanics perspective" on this. Keep up the good work guy.
I appreciate that!
I hope the dealership where u work realizes that U would be the reason people would buy a machine! Having the knowledge U have is invaluable in today's market! Please keep the videos updated on this series machine if any problems arise as we all will be very interested! Thanks for all U do !
I appreciate that! They only know me as a number on their books, haha, but thats what happens when you go corporate.
That's what I said ! Your Videos help people somewhat understand , but they Still have to Buy the Parts from Bobcat . Bobcat was not Losing anything !! 👍🇺🇸 !!
This channel and you are world class, literally. Top 1% of mechanical education on these machines. Your subscriber count will continue to increase! Hopefully your channel is monetized. Your intelligence and teaching / explaining skills are second to none. Keep the videos coming out, we will watch every minute. Sincerely, thank you.
Wow, thank you!
@@tetradgroup What do you think of the Bobcat brand compared to other top brands out there?
Amazing video. This deserves millions of views. Very well played out and explained
Wow great video thanks so much ,my company runs one s870 and three t770 two have had fuel issues and the 870 also blew pump seals and filled the chain case with hydraulic fluid.now all the bugs are fixed and they are great machines.you have really taught a old dog a lot about these machines thanks again bud
I'm glad you stated from a mechanic's standpoint only. After a few short years and so many hours these machines become a bleeding pig to the wallet !!!! Technology today comes with a enormous cost to maintain and repair down the road. I used to service a fleet of g-series 773's. They're all still in service .
I got a G series and have had minimal issues that I’ve been able to service on my own with a couple good manuals. Aside from tracks and undercarriage it’s given me no issues.
Great look at the machine! It's a beast! Always great videos!
Love your work every single time
Great explanation on the hydraulic system , much better than a salesman….thanks for the great videos..
Thanks 👍
We ship a machine off to the shop every month. I'll be doing all I can to purchase ANY other manufacture for the next purchasing round.
So initially I was under the impression Bobcat was going to integrate an auxillary oil cooler into this particular machine for hydraulic oil temperature control. My gripe with all the major compact track machine manufacturers is they say you can run attachments such as a Diamond forestry head or FAE mulcher and the machines will keep the hydraulic oil cool enough to run in summertime. That is not the case in any of the three machines I've tried; Tak, Bobcat or John Deere. Was hoping this machine would solve that problem. Doesn't appear they did that.
They did solve it, and now it’s proven by scores of T86 running forestry heads in Texas and all over the Deep South last summer, I’m talking triple digit heat 8 hour days with fluid temps hovering around 150 degrees. It’s quite remarkable, and why I bought one last week, T86 is now one of only two machines that can claim this with just the factory cooling system, the other is the ASV RT135 but that’s more of a dedicated mulching tractor and riddled with issues. I’ve personally kept in touch with around 15 guys running T86’s for the last 12 months and ALL of them have been bulletproof. Phenomenal machine.
@@TheOMEGANOXHow do you find the cockpit, it looks a little sparse. I don’t care about coffee cup holders etc, but seat comfort, controls and noise etc.
Cockpit is good, debris is a daily struggle.
@@shiraz1736 the seat bottom could extend out a little further IMO but it’s a minor gripe, everything else is top notch.
The review is well done and informative. Similar to competition the serviceability in the engine compartment looks absolutely brutal. Also, I am not a fan of the rear visibility on these Bobcats either. You can’t see behind you for love nor money same as prior Bobcat models….and this is very important if you’ve spent any amount of time operating these machines in the real world.
I’ve been more impressed with the past Kubota engines than the newer Doosan engines. Our S570 air box cleaner is such a pain, and the fuel rail shows so much rust, yet we don’t use it in winter. But our older T590, powered by Kubota, is night and day better..just seems like maintenance overall is easier. BTW, your videos are great learning tools.
Started following you a few weeks ago as I have been getting more into skid steers on CZcams and they recommended you. I am glad they did! Thanks for this video, can't wait to watch it! PS I would love your thoughts on the small 463/S70s, I haven't been able to find any videos on those specifically on your channel.
Awesome! Thank you! Next time I get a chance to work on one of the small machines I will try to put something together. Thanks for the idea.
@@tetradgroup My other question is in regards to America's supply chain issues. Do you see our supply chain going back to normal anytime soon or we have to wait till Trump gets back in office?
Keep Rocking BRO !!
Great video, you know your Bobcats!!
Wow, your CZcams poped up on my feed, I remember you from school in Denver! From Utah it’s Paul who sat behind you man, hope all is well love the videos
Awesome, absolutely I remember you, hope all is well. Remind where you are from again?
Awesome info thank you Soo much!
Thanks!
Can you please make a short video about the operation of the t870 hydraulic track tension system? I put new tracks on mine and i want to understand exactly how they are supposed to function during and after track changes
What a nice machine ❤
Hey that is a pretty nice flow testing setup! Could you do a video on other tools/shop equipment like that flow meter that you use to test equipment?
Great look into my new machine
I love it, cant wait to run a mulcher on it.
We need a mulcher review
@@georgebert8614 if the dealer would put the deal together on my T86 I could pick it up. They’ve been in no hurry to make delivery
Mine should be here next month!
I got one on the way. Its taking a long time. I'm excited but a little bummed by the loosening 12" of lift. I've got the new 48" planer sitting in my shop all lonely.
Great write up, i suppose this could be next once i put some hours on my new 770
Great video. I don’t think I’d have the patience for the tight quarters trying to change hoses etc. but that’s on all skid steers not just this one. They have to pack 10#s of poo in a 5# diaper. !
I’m looking to buy a t770 with the Diamond 48 disk mulcher. I figured the 48 may be a little easier on the hydraulic system would like to go a little bigger on the mulcher but I am scared. A lot of videos show the overheating issue and I’m just not sure. Not holding you too anything but what is to be expected with the combo I have picked out haha . Are there any major issues with the 770?
Looking to possibly replace my 2018 T770 with one of these, current Hrs 2600. I've been told to bump up my case drain to a 5/8 line straight to tank. and run 1" lines to my couplers. also have a couple guys telling me to crank up the main relief valve. I mainly forestry mulch and stump grind. But if I'm beating a dead horse and its time to replace the machine I'm curious of the case drain line size on the t86 also concerned with debris getting into the belly pan. Not uncommon to find mud holes in my line of work. Not sure if its best to fix up what I have now or try one of the R series out.
I was a tech for bobcat for about a year. We had somany issues with weird eletrical issues bobcat ever fix those?
How could you run a mulcher with hydraulic hood when the auxiliary is only two hoses? So you wouldn't have a second auxiliary circuit to use the hydraulic hood? Thanks
I think the newer Toolcats also have the Delphi fuel system. Would you call the engine in these new Toolcats a V2? Is the Delphi system a significant upgrade, in your opinion and, if so, can you so more about why? Appreciate your videos. Thanks!
V1 was Delphi, the upgraded V2 has the Bosch fuel system. You are correct the new Toolcats UW53 and UW56 have the upgraded V2 engine with Bosch.
After the T86 being out and working for a year or so, how are they doing as far as reliability? Are there common problems that they’re having?
17:11 Do all the various case drain lines, including the auxiliary case drain line, all feed into a common manifold first like they do on the T770 and T870?
Yes same idea just different style of manifold with a filter
Are you at some sort of 'training room' where you get training on the newest equipment? What does that training cost?
Not a training facility, just a work shop.
Wonder what durability is on the new machine. My buddy bought a t76 and has trouble every time is gets wet. It starts throwing codes bobcat could not fix it so he had to trade for another brand.
If you had to choose from t66 t76 t86 what u get if you could
Will this engine go thru more def? I go thru several tanks of fuel on my s-770 before I need def.
Not sure but that is an interesting question. I will look into it and let you know if I find anything. I would think it would last longer being the same size but more efficient engine that runs cooler due to the new design.
Awesome video with great info! Quick question…Bosch cp4 injection pump?
Yes CP4.1
@@tetradgroup thanks for the quick reply… I’m not familiar with the cp4.1 but I’m hoping it is not plague by the failures that the cp4 seems to have.
Is it possible to add high flow to a standard flow T 66? If so, would it be cost effective? TIA
It is possible but I have not done a T66 yet, usually the conversion is between $5k - $7k
Just curious how did you test super flow without plugging into the 1 inch fittings? Did I miss something? Or just not understand how it works?
One set of hoses feeds both fittings, they are the same circuit
Was that a bolt missing on the DEF injector?
Indeed it was a missing bolt.
Do that one have the hydraulic track tensioner like the 870 or grease ?
Excellent question! Looks like it will be grease cylinder, I do not see any options for the hydraulic tensioner.
@@tetradgroup I think that's a good thing cause I've replaced many hydraulic tensioner at my dealership I work at
Do the arms need to be raised to access the battery if my battery dies how do I access it?
Just raise cab, no need to have arms raised.
Can't wait to replace the cab harnesses in these new girls.
Seeing a T86 I would have major concerns on its design.
The T86 has exposed driveline motor lines on the underside of the machine. When mulching they will get broken.
The T86 has a grate on top for air intake instead of a precleaner assembly. The air cleaner will clog with dirt quickly in dusty environments or while mulching.
What looks like a serious concern to me also is the location of a good portion of wiring harness and the Ecu being located on the bottom of the compartment. Any of us who have owned track loaders know that mud and water finds it way into the bottom of the compartment. Its ridiculous to place it there. What do you think will happen to the Ecu and connectors when you get stuck in deep mud or a creek?
How could Bobcat finally design a well built machine capable of mulching with the right pump and good flow only to completely F up and make critical design mistakes like the ones I mentioned.
When a company is completely disconnected from the end use this is what happens.
They got it right in so many ways but then totally screwed up on critical machine killing details.
Thanks for taking the time to make the video to show us the machine though. Very informative.
Any more thought on the usage of def on these machines?
Well, it will use 1 tank of DEF to every two tanks of fuel. This is more frequent than the M Series due to smaller tank and the fact it does not have an ERG which requires more DEF to remain emissions compliant.
Excellent question, thanks for asking.
Super flow what attachments can even handle that all I can think of is a Mulcher head
I became a subscriber at "We're not afraid of death."
I see the engine is packed in there, we 100% forestry mulching, how easy is it to keep cleaned out?? Looks really hard, would love to get away from our Cats.
Hey HowIDidIt i have a T86 throwing code C10A5-16 Pump Case Drain Hydraulic oil temp out of range Low. I was running my stump grinder when it did it. hydraulic fluid is full and hydraulic temp is right at 125 degrees when it happened, is that to cold and maybe whats causing the issue? The dealer checked the OHMs on both temp sensors and it was 745 (supposed to be normal) I guess. They cleaned out the hydraulic fan solenoid as it seemed stuck and to cold for running temp and seems fine now after being pulled and cleaned. What is your opinion is it pops up again? thanks!
Out of range low is possible loose plug at sensor or wiring issue. The case drain manifold under the cab has a filter on it, there you will find a couple temp sensors. Check connections or swap plugs and see if code changes.
If it happens again I will swap plugs! what should I expect when swapping plugs and it happens again?@@tetradgroup
@dillon40R depends on the source of the issue. If it's a bad sensor then the code would change to motor case drain temp code. If it's wiring then the code would not change.
Glad your issue with Bobcat settled down, you are a great ambassador for them. Good ridden to Delphi! I hated thier electronics on GM products. I will always have a sour taste in my mouth for them. That thing is a beast
You and me both!
The mechanic, now or soon getting paid sales commission I'm sure. Bobcat has a new dealer here in Oklahoma and all of their equipment is innovative and top of the market for sure though.
There is definetly some weird stuff going on. Calculated hydraulic hp on superflow is greater than the engine output which is just not possible. Intersting
If the machine were running at max flow over relief pressure, I'm calculating 99.5 hydraulic horse power. That would kill the engine but the engine is rated at 105hp.
@@tetradgroup I wonder at what point does the superflow even matter? My tl12r2 high flow is 40gpm and produces 84 hydraulic hp with 115 hp but can still stall the motor with the mulching head. So is super flow even worth it because the power is unusable?
Did they do away with the belt drive hydraulic pump? Looks that way. That was the worst thing.
Yep, R-Series are in-line now with a coupler. No more drive belts.
Using DEF has the same result as EGR.
So
If they built the machine bigger
Then the room to work on would make it easier
With a release to take the cab out of the way
Modern battery to tuck it away nicer
Sure all improvements = more $'s
Theres a bit of competition now with other brands
But in time
Improvements will get better
Like travel with super flow on
Its probably like closing a value on the travel speed to maintain pump flow
They haven't figured that one out yet
That cab lift didnt look smooth
Perhaps a cab lift that can tilt all the way over to where the roof sits on the ground
An engineers dream job
Thank you
we will see a new A86??
Not that I'm aware of, I think the A series has been discontinued indefinitely.
@@tetradgroup 😢
Now if we could just get an A86 with quad tracks
That would be awesome
@@tetradgroup yes so awesome 😎
I work at bobcat and build them machines
What’s a fair price for an 86 with a Forestry kit?
Inline engine will make service a bitch.Looks like access to everything is tight
Exactly, this design has almost doubled my service time. More on that in another video.
Missing bolt on a bobcat not surprising
Anyone still just prefer a Kubota engine? 🙋
HOW MUCH $$$$$.
There’s a good chance I made the right track carriage on that machine.
Awesome
Main issues I have with 299s are the final drive hoses being exposed between the frame and the drive. If this machine will be in the woods how does it look between the frame and finals? Need to see the guarding there please.
Have you looked at the D3? I believe your concern has been addressed w a new hose routing block.
LIke almost everything made these days … instead of making things bulletproof there is the desire for more complexity. Ultimately it leads to lots of expensive repairs and frustration. KISS should be the engineers motto …
Wow hope that thing never breaks down, It's so jamed up in there how the hell do u ever fix anything without taking half the machine apart. just my 2 cents.
Fuses under there is a bit disappointing.
Doesn't look fun to get at the doc and SCR 😮
Yes very interesting u better work on it first😂
Pimpin hose for $1
Hh
Yikes, bobcat Kool aid
Oh my god no space to work on this machine, hoses are every place and all the electronics! Not an owner operator friendly machine. May work assume when it is working but it will need to be repaired and owner operator is out of the game. If one is only an operator this is the machine to operate.
The r series machines are absolute junk been dealing with lots of electrical issues dealing with displays staying on and stuff like that.
Seriously? If a display staying on is the best example you got of a common failure you deal with to share, that problem hardly condemns the series as junk.
Especially since stay on issues are so easily diagnosed. 👊
@@jaxturner7288 no the r series suck lmao a brand new machine should not have this many electrical issues. The cabs are heavier on the the design of the air box for the ac is bulky and awkward to lower the cab can be a pain by yourself. The battery location can be a pain. The main harness where it goes through the firewall can be a pain in the ass. God forbid you have to replace a left awash plate sensor that’s a total bitch to do. The def injector is a pain to get to. V2 engine analyzer isn’t the greatest tool to help trouble shoot those engines. As far as leak back test on those injectors good luck unless you make your own fittings to plug into the injectors that will cost you about $100 for just the fittings. The oil filter locations make catching the excess oil a pain. More than likely there will be a mess to clean up. The push lock hydraulic hoses are a pain in the ass to have made at a local hose shop. The fact that most of the new ones run blue hydraulic oil now sometimes red means service techs have to carry more oil. Yeah all in all they suck. Go work on them for a change and tell me what you think.
@@jakestover9482 I remember my first week fixing stuff and thinking everything is difficult to work on as well.
Welcome to the life of fixing stuff.
None of it is easy or convenient.
👍
@@jaxturner7288 🤣 not my first week at all but right on boss man. All in all the r series are still junk ass machines that’s still what this is about. I guess they are better than a JCB but other than that they suck. I’m sure you’ve worked on way more things, different product lines than me 🙄🤣.
@@jakestover9482 just messing with you but seriously, heavy stuff and components that are frustrating to deal with are a constant and expected part of the job.
May as well just get used to it, over it, or out of it. 👍
Doosan is junk t770, t630 had nothing but problems
Bobcats been junk since being bought out.
Flow while under load is needed, let’s see what gpm it does at 3000-4000psi
Wow that air intake location looks like it will work a lot better. Also, how often is the case drain filter supposed to be changed on a T76? And what happens If it does not get changed?
Thanks for the great videos
I would change the case drain every 500 hours, worst case a clogged case drain filter could cause blown drive motor seals.
@@tetradgroup does a clogged case drain show any symptoms before it blows the drive motor seals?
@@pigslayer106 nope, especially on the older machines with old style metal case drain filters but I wouldn't worry about it with a spin on filter as they are much better. I haven't seen blown seals since the spin filters came out so that would be an extremely rare case but possible none the less