Hey man I appreciate your video I got a exmark 30 inch and I love the way it cuts grass is amazing Pizza machine I just recently had a problem with the blades not engaging when I pull the lever and so I looked up videos on CZcams about it and you figured it out what I need to do instead of taking it to the shop last time I took it to the shop it took me 2 months to get it back on the job still didn't get done so now I figure I'll do it myself hopefully I get time on a rainy day because I run a full-time business thanks a lot my man
You got me thinking about changing my mind on buying one of these. Dealer doesn’t have one in stock any way. I just wanted bigger mower than my 21 inch. I’m a homeowner not in the business.
Preciate that mayne, I’m heavy learning time management, best executions on new properties, safety, all kinds of shyt and finding camera angles and proper lighting is just not number one on my list, I’ve learned a ton this season so I’ll ease back into filming in a second. Your videos are dope, keep going man, I appreciate you looking out 🫡🫡
Excellent information, that should help others with this mower. Sounds like that drive pulley and other pulley was bad from the start. Great tricks and tips , awesome mower.
It amaze me how those belt covers always seem to do more harm than good. Great info Chris should be helpful for others that own or looking to purchase. Like a clean mower also✔️💯✂️💪🏽
@@choppinbladeslawncare I’m also in the valley of decision. lords willing I’m still going to mow lawns but I’m split between choosing 60%-40% lawn or trees!
Very good video. I watched alot of you're videos on you're likes and dislikes, issues with this mower. Helped me decide on witch mower I wanted to buy. Other then talked to people and all the online research I did. Really wanted to like the toro or exmark 30 but just couldn't do it. Everyone I talked to with the exmark 30 with the kawasaki engine said they dident like it. Would bogg down under extreme loads vs the kohler 200 would not. They should of put the 224 on it like the scag. Anyways. Any one I ran into with the newer exmark always had pully,belt and other issues and everyone complained that there was no casters on it. Being it was only 36 lbs less then the scag sfc30. Witch has a better deck, pullys spindles. Exmark 30 weight 180lbs Scag 30 220 lbs The scag has its issues to. Only 36lbs heavier but with the casters kinda makes up for it. ( what I end getting) people blow clutches on the scag but slam that clutch in and out all day. Newer version has a different one. Me and my dad back in the day had the cub cc800 33" walk behind. First 3 years wad great with then. After nothing but constant issues. Then it seemed like the cut quality went out the window. Even with the usually maintenance and up keep. But that mower is the heaviest. At 323 lbs. 100 more then the sagg and way more then the exmark. But that big back tire kinda helped alot.
Thanks big dawg, the x series like I have were more newer and expensive, I tried getting the best of the best to keep from dealing with what I am currently dealing with. Those scags are around 3k
Oh yea making a video while working is a lot of work. Oh mine surges so I will have to try the fuel cap cause I always tighten it till it clicks. Yes I took my guards off also cause I didn't realize how much grass was built up in there till I took it off cause I had to replace the belt. Ouch! yea that first pulley looked pretty bad. Yea I can see that little lip. That is a nice mower. Great tips and tricks brother 👊💯
Man I don’t have a part number or anything but they come with this small pancake style or small barrel shaped white non see through filter, I would assume it’s just the see through barrel shaped filter for Koehler and Kawasaki engines.
There’s a tension pulley on it, either your spring is broken or missing or the plastic pulley has broken. That’s what happened with mine the pulley broke.
Idle isn’t where you would be mowing at. And the smaller fuel filter is the correct filter…. What you are putting on is made for a fuel pump (not gravity fed fuel)
I haven’t seen anything that makes one superior over the other, so whichever one you choose should work fine, I think the scag is more expensive than the others though.
@Choppin Blades Lawn Care for me in florida the exmark is about 2700 after tax and the scag with casters is around 3290 after tax so not a huge difference but looking at the weight difference I might go with the exmark. One thing is does the exmark really change from the toro or is it just the height adjustment
Hey man I appreciate your video I got a exmark 30 inch and I love the way it cuts grass is amazing Pizza machine I just recently had a problem with the blades not engaging when I pull the lever and so I looked up videos on CZcams about it and you figured it out what I need to do instead of taking it to the shop last time I took it to the shop it took me 2 months to get it back on the job still didn't get done so now I figure I'll do it myself hopefully I get time on a rainy day because I run a full-time business thanks a lot my man
Glad it helped bro 💯🫡
Nice bro
You got me thinking about changing my mind on buying one of these. Dealer doesn’t have one in stock any way. I just wanted bigger mower than my 21 inch. I’m a homeowner not in the business.
It may be okay for home owners, but to be a commercial mower, it’s problematic with frequent use.
You’re right dude, the filming and working is absolutely insane.
I’m always impressed with what you do, it takes a lot to make the videos that you do.
Preciate that mayne, I’m heavy learning time management, best executions on new properties, safety, all kinds of shyt and finding camera angles and proper lighting is just not number one on my list, I’ve learned a ton this season so I’ll ease back into filming in a second. Your videos are dope, keep going man, I appreciate you looking out 🫡🫡
Appreciate your honesty!
Dammit!!! Very informative. I need this....like four videos in 1.thank you thank you thank you
Glad it helped out 🫡
Thanks for the detailed info. Glad to see ya, young man. Be Blessed 😊
Hey Ms Tonya, stay on they necks! 💯✂️💯
i like Exmark and Scag
Just bought a used exmark 30 s series with the kawasaki. Very informative. Thank you
Thanks, I hope it works well for you.
Thank you for the information brother
💯💯🫡
Excellent information, that should help others with this mower. Sounds like that drive pulley and other pulley was bad from the start. Great tricks and tips , awesome mower.
Thank you, I believe they were bad from the start too, the salesman said it had been demoed out once, they must’ve screwed the mower up then lol
Thanx bro! Good vid!
That's good info for any mower, gotta keep the bread and butter going. Welcome back!💯💪🏾✂️
Yes suh! 💯💯💯
Glad your posting again
I’m trying to get back in the game coach! Thanks for stopping by bro 💯
@@choppinbladeslawncare no problem keep the content coming out 👊
It amaze me how those belt covers always seem to do more harm than good. Great info Chris should be helpful for others that own or looking to purchase. Like a clean mower also✔️💯✂️💪🏽
Yes sir, thanks for tuning in Mr Renaldo 💯✂️🫡
GreAt informative video bro… sorry to hear you had problems with this mower..
Thanks bro, I think I have it figured out now tho!
@@choppinbladeslawncare that’s awesome
First! Glad to see you posting again!
T Money, yep back on it, thanks for pulling up! 💯✂️
@@choppinbladeslawncare You’re welcome! Always down for supporting you! Have you found a stander yet?
@@TerrellWillams man I’m trying to decide on a stander or a truck, really don’t want to get both but I might have to.
@@choppinbladeslawncare I’m also in the valley of decision. lords willing I’m still going to mow lawns but I’m split between choosing 60%-40% lawn or trees!
Think I would rasther go with turfmaster better height adjustment
Awesome!
Very good video. I watched alot of you're videos on you're likes and dislikes, issues with this mower. Helped me decide on witch mower I wanted to buy. Other then talked to people and all the online research I did.
Really wanted to like the toro or exmark 30 but just couldn't do it. Everyone I talked to with the exmark 30 with the kawasaki engine said they dident like it. Would bogg down under extreme loads vs the kohler 200 would not. They should of put the 224 on it like the scag. Anyways. Any one I ran into with the newer exmark always had pully,belt and other issues and everyone complained that there was no casters on it. Being it was only 36 lbs less then the scag sfc30. Witch has a better deck, pullys spindles.
Exmark 30 weight 180lbs
Scag 30 220 lbs
The scag has its issues to. Only 36lbs heavier but with the casters kinda makes up for it. ( what I end getting) people blow clutches on the scag but slam that clutch in and out all day. Newer version has a different one.
Me and my dad back in the day had the cub cc800 33" walk behind. First 3 years wad great with then. After nothing but constant issues. Then it seemed like the cut quality went out the window. Even with the usually maintenance and up keep. But that mower is the heaviest. At 323 lbs. 100 more then the sagg and way more then the exmark. But that big back tire kinda helped alot.
Thanks for watching and sharing your story!
Glad you dropping again. Damn I didn't know those cost $2600. Scag are around $3K I think. I would be calling too.
Thanks big dawg, the x series like I have were more newer and expensive, I tried getting the best of the best to keep from dealing with what I am currently dealing with. Those scags are around 3k
Oh yea making a video while working is a lot of work. Oh mine surges so I will have to try the fuel cap cause I always tighten it till it clicks. Yes I took my guards off also cause I didn't realize how much grass was built up in there till I took it off cause I had to replace the belt. Ouch! yea that first pulley looked pretty bad. Yea I can see that little lip. That is a nice mower. Great tips and tricks brother 👊💯
Thanks Bill, man I really appreciate you watching the video and sharing your experience.
@@choppinbladeslawncare Your welcome Chris. Oh you know I always watch the whole video and love to share my experiences, maybe it will help someone.
Where do you get the custom tags from ?
I appreciate the knowledge man my drive belts keep breaking I’m going to replace the drive pulley and see if that helps
Vista print my guy, yes check that pulley and tensioner out, i can’t think of anything else that would make it break.
Can I get details on the bigger fuel filter you used?
Man I don’t have a part number or anything but they come with this small pancake style or small barrel shaped white non see through filter, I would assume it’s just the see through barrel shaped filter for Koehler and Kawasaki engines.
My drive belt is loose as hell, how do you tighten it
There’s a tension pulley on it, either your spring is broken or missing or the plastic pulley has broken. That’s what happened with mine the pulley broke.
How much should the idle screw be screwed in?
@@The_Mentorship_initiative mine is a little over 1/4 screwed in.
@@choppinbladeslawncare thanks man, just got the new 2024 model exmark and figuring it out
We just got a mower today and yes it’s hard to turn especially turning it right. Does anyone know what that may be?
Only thing I can think of is your transmission is binding when the wheels roll right.
@@choppinbladeslawncare yup that or maybe can it be that the brake cable is to tight?
Idle isn’t where you would be mowing at. And the smaller fuel filter is the correct filter…. What you are putting on is made for a fuel pump (not gravity fed fuel)
Thanks for the info, the filter I installed has been working great, guess I lucked out!
Hey I'm looking into buying thus exmark or maybe the toro version but would you recommend this mower or should I go with the scag scf30
I haven’t seen anything that makes one superior over the other, so whichever one you choose should work fine, I think the scag is more expensive than the others though.
@Choppin Blades Lawn Care for me in florida the exmark is about 2700 after tax and the scag with casters is around 3290 after tax so not a huge difference but looking at the weight difference I might go with the exmark. One thing is does the exmark really change from the toro or is it just the height adjustment
@@str8upn0l1fe6 oh yea, the height adjustment is big, I like that it’s one touch on the toro.
@Choppin Blades Lawn Care ah I see thanks for the feed back I'll probably get the exmark with the Kohler engine
Well damm, ok Now, i know what to do when I get one. Where you order those pulleys?
Any Exmark dealer.
Work it out Big Guy!!!!!!!!!!!!!!
No doubt Mr J
Commercial mower with plastic pulleys? That doesn't make sense. Come on Exmark. These are critical movers.
🫡💯