You can get all the textures I use at PolyHaven for free! www.polyhaven.com Get this project file by joining the second tier and up on patreon by September 2023: www.patreon.com/cbaileyfilm You can also find the uncut version of this tutorial by joining on youtube or Patreon at any tier. Thanks for watching!!!!
After years of searching, your video is the only one on the subject actually helpful to me. Amazing how simple, straight forward and genius it is. There is probably no way for me to express how desperate I was for this and my gratitude. You are a lifesaver; my deepest, sincerest thanks!
You get me 3/4 into your tutorial, and then you suddenly start cutting out problem solving chunks, hidden behind patreon or youtube subscribtion... No thank you, I'll find other tutorials who won't trick me like that. Thanks for the unfinished work that was to be my first blender project :)
Sorry EliseFox25 that must have been a frustrating experience. I’ve experimented a lot with trying to monetise the channel but it hasn’t always worked out well. I should consider warning people better up front instead of doing it as an afterthought. Thanks for sharing your experience.
@@CBaileyFilm I appreciate the reply, I understand it's tricky to monetize something like this. Perhaps making tutorials that give a full flow from start to end, and then a paid extention after that where you take it to the next level. For example, after this tutorial you could go and add mood atmosphere, dust particles flying around, creating this old looking scene, animated camera, rendering things out. Basically turning the tutorials from a teaching moment into a portfolio piece. But cutting out trouble shooting on purpose all the way at the end leaves me with a feeling of distrust and unwilling to support you further.
@@EliseFox25 Yes, please make it more clear. I was questioning my abilities so much, because my page didn't bend like yours. I noticed few cuts but not this one... hope I will find it somewhere else
Nice one! I am close to releasing a fully procedural geometry nodes setup to make any books with any number of pages that can be entirely animated and auto textured using the real printing files for a book!
@@KwameGyanko Indeed, mine is mostly a cleaned up version of the setup I made for commercial book showcase for hardcover, paperback, magazines, spiral and wiro, a bit of a different use case than the existing ones.
Nice. I could have done with this a few years ago when I was making animated backdrops for a stage school and they were doing a storybook show. I ended up doing something similar with empties, but it took me ages to work it out. My final version had a very slightly diagonal curl as the page turned, to make it look more like the pages were being turned by hand.
Nice vid! How did you solve the “weird” fake pages distortion after applying the new material to the tops of the fixed pages? You point to the modifier stack as the cause, but the video skips over how you solved it. TIA
i tried to the copy rotation in 4.1 doesnt make the flow of the sheet of paper flow with the other side of the book only rotates the edge of sheet unless i was doing something wrong
Hi, not only that you are very charming handsome guy, but yo're brilliant and your tutorial is great. I'm not that much experienced in Blender, so it took me a week to adapt your tutorial to my book project, however it worked well. Thank you for sharing. Bests
is it possible to add a burning/disolve effect on the pages as they turn? In order to illustrate the strophe "Time still turns the pages of the book it's burned" from A7X's masterpiece "So Far Away".
Cool idea. Yes it would be possible, you'd have to use a gradient in the shader and a noise node and feed that into the alpha and do some emission on the edge for the singe. This could be a good tutorial I think.
Nice Blender rig here. I've been looking for a way to do this for FBX anim export to UE and the like. Is it necessary to use armature/bones for that? Can you bake this kind of anim to FBX? I've tried, and it always imports back wonky. Thanks! You rock.
In 2:06 how do you get to split the edge symmetrically? I selected the whole edge with alt just as you did and then Ctrl + B but somehow I can only drag the edge to bevel to one of the covers, leaving two differently sized covers.
i was thinking of making an Iron-Man suit for the next video using the Grid Modeler addon or other free addons (i only need free addons) if that's alright?
@@rintluangak4984 He probably means to select a loop. The sound suddenly gets so loud you can't even hear the guy. But the screen says alt middle click. But that doesn't seem to work, what's the shortcut for select loop?
2:05 The loud music twice was enough. I am here for animation, not music. Please just stop completely using music. Its a waste of your time, and totally needless. Lead the way to less noise pollution. On to another video.....
@@bamabbitt Did you have music in every class at school? This idiot trend of must have music needs to stop. Not all viewers are 12 years old and need to be hooked with music. I use CC a lot.
@@PeeWee1476 Lol - or getting more, depending on ones viewpoint..... TBH with the shitty returns from YT I dont see why people waste so much time - unless they are only aimed at the teen market. Music, lots of animations, all the bells and whistles.... I learned Blender from pdf's - before YT existed. Its often a faster way to learn.
You can get all the textures I use at PolyHaven for free! www.polyhaven.com Get this project file by joining the second tier and up on patreon by September 2023: www.patreon.com/cbaileyfilm You can also find the uncut version of this tutorial by joining on youtube or Patreon at any tier. Thanks for watching!!!!
After years of searching, your video is the only one on the subject actually helpful to me. Amazing how simple, straight forward and genius it is. There is probably no way for me to express how desperate I was for this and my gratitude. You are a lifesaver; my deepest, sincerest thanks!
You get me 3/4 into your tutorial, and then you suddenly start cutting out problem solving chunks, hidden behind patreon or youtube subscribtion... No thank you, I'll find other tutorials who won't trick me like that. Thanks for the unfinished work that was to be my first blender project :)
Sorry EliseFox25 that must have been a frustrating experience. I’ve experimented a lot with trying to monetise the channel but it hasn’t always worked out well. I should consider warning people better up front instead of doing it as an afterthought. Thanks for sharing your experience.
@@CBaileyFilm I appreciate the reply, I understand it's tricky to monetize something like this.
Perhaps making tutorials that give a full flow from start to end, and then a paid extention after that where you take it to the next level. For example, after this tutorial you could go and add mood atmosphere, dust particles flying around, creating this old looking scene, animated camera, rendering things out. Basically turning the tutorials from a teaching moment into a portfolio piece.
But cutting out trouble shooting on purpose all the way at the end leaves me with a feeling of distrust and unwilling to support you further.
@@EliseFox25 Yes, please make it more clear. I was questioning my abilities so much, because my page didn't bend like yours. I noticed few cuts but not this one... hope I will find it somewhere else
Nice one! I am close to releasing a fully procedural geometry nodes setup to make any books with any number of pages that can be entirely animated and auto textured using the real printing files for a book!
well one already exists and it's pretty great
@@KwameGyanko Indeed, mine is mostly a cleaned up version of the setup I made for commercial book showcase for hardcover, paperback, magazines, spiral and wiro, a bit of a different use case than the existing ones.
@@alexandre.albisserstill wqiting
Where?@@KwameGyanko
have you found it?
Superb! You make this stuff look so easy, but you're done some beautifully well thought out things.
This is a genius solution!
As always, your tutorials are fantastic. Thanks
Nice. I could have done with this a few years ago when I was making animated backdrops for a stage school and they were doing a storybook show.
I ended up doing something similar with empties, but it took me ages to work it out.
My final version had a very slightly diagonal curl as the page turned, to make it look more like the pages were being turned by hand.
For those who get the same problem, at 19:55 if u have a weird texture in Base pages, edit the amount in Modifiers Bevel.
Good luck🍀
Can you tell me what did you change and amount of what you change
Nice vid! How did you solve the “weird” fake pages distortion after applying the new material to the tops of the fixed pages? You point to the modifier stack as the cause, but the video skips over how you solved it. TIA
i tried to the copy rotation in 4.1 doesnt make the flow of the sheet of paper flow with the other side of the book only rotates the edge of sheet unless i was doing something wrong
I think he cut some of the video. He answered this issue in comments (answer to EliseFox25)
Hi, not only that you are very charming handsome guy, but yo're brilliant and your tutorial is great. I'm not that much experienced in Blender, so it took me a week to adapt your tutorial to my book project, however it worked well. Thank you for sharing. Bests
wow that is fantastic, it open my eyes to new ideals, thank you
is it possible to add a burning/disolve effect on the pages as they turn? In order to illustrate the strophe "Time still turns the pages of the book it's burned" from A7X's masterpiece "So Far Away".
Cool idea. Yes it would be possible, you'd have to use a gradient in the shader and a noise node and feed that into the alpha and do some emission on the edge for the singe. This could be a good tutorial I think.
Could you make a tutorial on how to control the animations on a web page?
Nice Blender rig here. I've been looking for a way to do this for FBX anim export to UE and the like. Is it necessary to use armature/bones for that? Can you bake this kind of anim to FBX? I've tried, and it always imports back wonky. Thanks! You rock.
In 2:06 how do you get to split the edge symmetrically? I selected the whole edge with alt just as you did and then Ctrl + B but somehow I can only drag the edge to bevel to one of the covers, leaving two differently sized covers.
Music is too loud
Please i need a information about your hardware configuration of your computer system for blender
nice ooooooooone! I would have just animate the curve object and the AnimAll keyframe the bend of the page? Keep it simple right?
The random, blaring music coming in over the instructional audio is weird. Great video, otherwise!
great! Can this animation be exported to Spark AR?
I made each page with the array mod. I was trying to figure out how to animate it
when the page is rotated, afterwards texture got upside douwn. How to fix that?
i was thinking of making an Iron-Man suit for the next video using the Grid Modeler addon or other free addons (i only need free addons) if that's alright?
When i change the location page is change rotation please help
25:42 doesn't work for me, it ends up rotating the center of the page no matter if its assigned or not. Couldn't find a solution pls hlep.
I am stupid! For anyone else who has the same problem, he is hooking the plain axis in the middle, not the sphere!
I joined the youtube channel all access but cant find the uncut version
I just realised I never uploaded it! Thanks for the reminder. I’ll get it up asap
It's up now! Check the community tab :-) thanks again for the reminder!
I was thinking of buying it, is it there?
When i rotate page into z axis things messed up plz help
Anyone know how to export as FBX or GLB ?
1:58 i don't understand
prss cntrl + B and move back your mouse
@@rintluangak4984 He probably means to select a loop. The sound suddenly gets so loud you can't even hear the guy. But the screen says alt middle click. But that doesn't seem to work, what's the shortcut for select loop?
2:05 The loud music twice was enough. I am here for animation, not music.
Please just stop completely using music. Its a waste of your time, and totally needless. Lead the way to less noise pollution.
On to another video.....
Mute the sound and turn on CC. Problem solved.
@@bamabbitt Did you have music in every class at school? This idiot trend of must have music needs to stop. Not all viewers are 12 years old and need to be hooked with music.
I use CC a lot.
There's literally no music in the entire rest of the video. It almost feels like it was an editing mistake. You're missing out!
@@PeeWee1476 Lol - or getting more, depending on ones viewpoint.....
TBH with the shitty returns from YT I dont see why people waste so much time - unless they are only aimed at the teen market. Music, lots of animations, all the bells and whistles....
I learned Blender from pdf's - before YT existed. Its often a faster way to learn.