If you have any problem, Please share your problem in the mentioned form and we will contact you with a solution in the next 24 hours. www.merchantnavydecoded.com/ask-your-query-beginner/
Beta Overhauling is easy if you understand the logic why we do each step , in purifier it is the troubleshooting that is very difficult and for that you need to understand the theoretical concept well, so in ACHIEVERS PACKAGE there is around 3 hours of just lectures on purifier with live engine room round , showing starting , stopping , desludging and also opened parts as well.
That particular tube is ruptured somewhere inside and due to this bursting disc will activate as these tubes contains compressed air and due to this leakage the shell pressure will increase and bursting disc will activate .
Hi Ravi, this topic is already covered and well explained in the visionary package. You can check here 👇 which all topics are covered in visionary package. czcams.com/play/PLcBq_iFPN5CSvSS6w6cNt7_nrQZ8Yox5i.html Link to the package is👇 www.merchantnavydecoded.com/courses/visionary-package/ - Team Merchant Navy Decoded
That one tube is cracked so water is leaking from it cuz you'll are pressure testing. but in operation air would leak out of the tube causing jacket to pressurise and eventually work the bursting disc Of the after cooler. To stop the leak I would plug it with copper plug or else remove the tubes once more than 20%appoz tubes are leaking
Good day Chief! Could it be because that one single tube is damaged and the cooling water is entering it and therefore leaking into the outlet of the air intercooler? If that is so, what would be the best course of action? From my first Cadet experience, I saw some tubes in different coolers being "closed off" manually because they were leaking.. Assuming my answer is correct, is it possible to apply the same fix to an Air Cooler or would that drammatically affect the air output and therefor not advisable to "close it off"?
Join my telegram group "marine engineering decoded" , you will not just get an answer there but so many others will try and help you enhance your knowledge as well.
Fusible plug mainly use for reducing risk of high pressure in air bottle. if automatic cut-off sensors not work then Fusible plug start melting as per temperature and release excess pressure from the air bottle.
Why is water separator required? I don't think so we cool the air that much that it condenses ? Or is the possibility of cooling water entering into the charge we pass it to water separator just as a precautionary measure?
Hi Aruna, this is Team Merchant Navy Decoded, we saw that you were trying to buy a package but weren't able to complete your order. If you're facing any problems you can connect with us and we'll help you resolve it the earliest😊. www.merchantnavydecoded.com/courses/
If you have any problem, Please share your problem in the mentioned form and we will contact you with a solution in the next 24 hours.
www.merchantnavydecoded.com/ask-your-query-beginner/
Keep making auxiliary machinery videos.. Lots of newbies will eventually be upgraded by your help. Sharing is caring. Thank you
surely will do that...
Bro,your video is splendid.Crystal clear explanation of videos.Keep on uploading videos..
Thank you, I will
This knowledge very helpful for us thanku sir
Nice sir ese hi video banate rahe
Very informative can u pls make video on purifier overhaul too..,.
Beta Overhauling is easy if you understand the logic why we do each step , in purifier it is the troubleshooting that is very difficult and for that you need to understand the theoretical concept well, so in ACHIEVERS PACKAGE there is around 3 hours of just lectures on purifier with live engine room round , showing starting , stopping , desludging and also opened parts as well.
Keep uploading the overhauling videos in regular basis sir. So we could learn more and more.
I wish, if I could sail with you someday sir.
I will try my best
Very good explanation Sir
🙏😊
That particular tube is ruptured somewhere inside and due to this bursting disc will activate as these tubes contains compressed air and due to this leakage the shell pressure will increase and bursting disc will activate .
what are the following checks and inspections during overhauling of Compressor
Jai Mata Ji 💟☮️
jai mata di!
Sir... Plzz make the video on refer air compressor....
Hi Ravi, this topic is already covered and well explained in the visionary package.
You can check here 👇 which all topics are covered in visionary package.
czcams.com/play/PLcBq_iFPN5CSvSS6w6cNt7_nrQZ8Yox5i.html
Link to the package is👇
www.merchantnavydecoded.com/courses/visionary-package/
- Team Merchant Navy Decoded
Wooo nice video
thank you
That one tube is cracked so water is leaking from it cuz you'll are pressure testing. but in operation air would leak out of the tube causing jacket to pressurise and eventually work the bursting disc Of the after cooler. To stop the leak I would plug it with copper plug or else remove the tubes once more than 20%appoz tubes are leaking
thanks for sharing the knowledge
Good day Chief!
Could it be because that one single tube is damaged and the cooling water is entering it and therefore leaking into the outlet of the air intercooler? If that is so, what would be the best course of action?
From my first Cadet experience, I saw some tubes in different coolers being "closed off" manually because they were leaking.. Assuming my answer is correct, is it possible to apply the same fix to an Air Cooler or would that drammatically affect the air output and therefor not advisable to "close it off"?
well join the telegram group "marine engineering decoded" and discuss there
Good video. Can you tell please what is the purpose of fusible plug in discharge side of the compressor?
Thanks.
Join my telegram group "marine engineering decoded" , you will not just get an answer there but so many others will try and help you enhance your knowledge as well.
@@merchantnavydecoded pls share ur telegram link here pls
Fusible plug mainly use for reducing risk of high pressure in air bottle. if automatic cut-off sensors not work then Fusible plug start melting as per temperature and release excess pressure from the air bottle.
@@carryboythegamer9675 Thanks for your kind explanation...
Why is water separator required? I don't think so we cool the air that much that it condenses ? Or is the possibility of cooling water entering into the charge we pass it to water separator just as a precautionary measure?
yes it gets condensed , for this we need to understand the concept of dew point and importance of pressure.
Tube damaged and cooling water intering air side.
yes , for more knowledge , join my telegram group "marine engineering decoded"
That's condensed water .
Mst clean kr k check krke box up krneka.
sure sir
Sir sponsorship Dene wali company par video bnaya sir please 🥺
soon Kunal, keep tuned in.
@@merchantnavydecoded Thank you sir ❤️
Is it water separator or oil separator after first and second stage ?
after both the stages
@@merchantnavydecoded my question is ... you mentioned the separatoe as water separator ... but is it water separator or oil separator?
@@hardiknagvekar1813 it separates both , the condensed water as well as oil carried over.
Is this hatlapa compressor?
nope
I need to pay money for your package but my visa card not except
Plaece tell me how to l pay money
Kindly whatsapp your query on the official no. Of Merchant Navy Decoded - 7417349336, we will try to resolve it as soon as possible.
Hi Aruna, this is Team Merchant Navy Decoded, we saw that you were trying to buy a package but weren't able to complete your order.
If you're facing any problems you can connect with us and we'll help you resolve it the earliest😊.
www.merchantnavydecoded.com/courses/