Glock 19 Polymer80 Zaffiri Precision Build with an Agency Arms 417 Compensator!
Vložit
- čas přidán 7. 06. 2024
- In this video I go over my Zaffiri Precision Glock 19 build. This gun has an Agency Arms compensator and it is a smooth shooter! It has a standard OEM trigger and lower and upper parts kit. It had a few problems with function in the beginning but after awhile it broke in and now works great. If you have any questions leave them down below! Hit that subscribe button and notification bell, go buy a gun, talk to your preacher and we'll see y'all in the next video!
INSTAGRAM:
/ the_sacredgunner
2 Corinthians 10:4
Looks good
Just stumbled upon your channel man but its dope keep up the good work. Both those zaffiri glocks look amazing
Thanks man!
Regarding the screw; you could sacrifice the cover plate by grinding area around the screw away to expose more of the screw to grab it with pliers, or you could tap the backside of a small blade flat screwdriver as you try to dig into the screw in an attempt to turn it counter clockwise. Or, use a small drill bit to bore a center hole, then remove with an extractor, but that'll be tough to not screw up the threads in the slide.
Thanks for the advice. I am in a tough spot but I may just have to either leave it or send it and see if I can make it work. Thanks for taking the time!
The screw on the RMR plate can be removed by using a speed out bit, if you can remove the RMR plate if possible beforehand, if you're not able to cover it up with heavy duct tape or preferably leather.
Washington Gun Law just put out a video on YT regarding the upcoming definitions. As such, any PMF (personally made/manufatured firearm) built after 1968 (The rule mentioned some year in the sixties) will have to be detroyed, turned in to police, or serialized at an ffl, and the serializing requirements were so lengthy that it's going to be very discouraging for ffl's to offer this service.
Alright thanks for the tip. I didn't know that as the ATF is always trying to enforce draconian laws and it is hard to stay on top of things. I will take note and keep with the situation. Thank you!
screw head appears to be gone, have you tried pulling the other screw out and removing the plate to see if there is a nub to grab? if the screw head isn't completely gone you can drill it out carefully until the head pops off and get the plate out of the way that way to see what you have to work with.
Anyone have issue with bullets not discharging after putting a comp on?
Is that the gen 3 slide from zaffiri ?
how long is the slide with the compensator on it is it as long as the 17?
what holster would you use with this?
Zaffiri is a fantastic company. I bought a Zaffiri 17L slide and barrel for my G34 Gen3. Looks amazing and cycles like butter. Reasonable prices, too!
I am thinking I am going to try them again but my glock 48 upper which I bought fully assembled from them resulted in them shipping me the wrong barrel and when I did finally get the right barrel it was FTF after FTF.
What gen is the compensator?
Which Glock Gen compensator are you running 3 or 4?
Agency Arms
Not a glock.
Gen 3 Glock
Their custom Glocks dumbass even better than your little stock gun
@@NutTapActual not a glock. Don't care what u say. It's a p80 they're different. Lol a gen 3 glock is a gen 3 glock. A p80 is patterned to accept glock internals. That's the only similarity. Grip angle, rail, trigger guard, stipple... Jesus. U shouldn't even be involved w guns.