Improving the Army MSV Gen II

Sdílet
Vložit
  • čas přidán 4. 04. 2024
  • We've made the hooah bois wait long enough...
    In this guide we go over DIY tips, product recommendations and more to improve your experience with the Army Gen II MSV Carrier.
    Shaw Concepts Gear:
    www.shawconcepts.com
    Instagram:
    / shawconcepts
  • Jak na to + styl

Komentáře • 25

  • @TROY-MCCLURE-1991
    @TROY-MCCLURE-1991 Před 3 měsíci +27

    A new era for Shaw Concepts. The host gets an upgraded mic setup.

  • @Sierra_Tango_5
    @Sierra_Tango_5 Před 3 měsíci +10

    Audio could definitely use adjusting. Better audio on speech, and wayyyy less volume on the music so that I don't blast my wife out of the kitchen. Otherwise, great job as always. Appreciable improvements. 👍

  • @2jzgteSupraJZA80
    @2jzgteSupraJZA80 Před 3 měsíci +10

    Hell yeah love me some Shaw Concepts!

  • @lancasterck
    @lancasterck Před 2 měsíci +6

    If you happen to have the manual for the MSV it shows you how the shoulder buckles are removable, just looked at mine and the buckles under the front flap are the same, they are removable so in theory a large Velcro patch could be put there removing the bulge from the buckles

  • @samchurch7057
    @samchurch7057 Před 22 hodinami

    you guys gotta restock!!!

  • @LegionPreparedness
    @LegionPreparedness Před 3 měsíci +2

    I dig it!

  • @personalaccount8914
    @personalaccount8914 Před 2 měsíci +1

    Have you cosidered making a larger plate carrier pack that uses the same design, just with more room? As an RTO the stuff i need in there pretty much completely fills an issued assault pack to the brim, including strapping shit to the outside. I want the plate carrier pack attachment system, but with capacity no less than that of the MOLLE 2 assault pack. If the PCP had that capacity, I'd have already bought it.

  • @TheLifeOfGames
    @TheLifeOfGames Před 2 měsíci

    What is the belt used in the introduction? specifically during 0:47-0:56

  • @james1695
    @james1695 Před 2 dny

    I’m confused my PCP is attached to the Msv all buckled too and tightened. Yet it still moves in the middle ?

  • @coreytena2
    @coreytena2 Před 3 měsíci +1

    Great video and products as usual. Imo I think it would be helpful to lower the music just a bit

  • @zacharyw9048
    @zacharyw9048 Před 3 měsíci

    163 radio pouch in development?!

  • @panzerkitsune
    @panzerkitsune Před 3 měsíci +3

    I feel the need to have the front buckles hardsewn instead of traditional velcro or tubes, is most likely due to the inability for some troopers to wanting to learn/understand how they work. So somebody just tried to make it more fool/boot-proof. And now everyone suffers for it. Thanks for the videos, they eliminated my desire to buy the MSV and/or the usmc gen 3 carriers after I saw the structural loadbearing design on them. I will stick to either the ancient Paraclete RMV or sell my kidney and buy a Crye pc.

  • @PracticalTacticalFedeli
    @PracticalTacticalFedeli Před 3 měsíci

    I just sold my GEN 2 because I preferred the GEN 1 ..I prolly dumb but it felt better

  • @sebleonard8273
    @sebleonard8273 Před 3 měsíci +2

    Those 2 buckles under the molle flap is just bruh 😑

  • @imriggedup1888
    @imriggedup1888 Před 3 měsíci +2

    Hi, again!

  • @TROY-MCCLURE-1991
    @TROY-MCCLURE-1991 Před 3 měsíci +1

    Re upload?

    • @shawconceptsllc.8797
      @shawconceptsllc.8797  Před 3 měsíci +5

      Yes, please recomment your mic comment for the audio guy to be happy again hahaha

  • @george398
    @george398 Před 3 měsíci

    Tickle tickle....

  • @pyeitme508
    @pyeitme508 Před 3 měsíci +1

    RAD

  • @MrSwccguy
    @MrSwccguy Před 3 měsíci +2

    Ah another shit tier carrier by big military