Let's Make 3 Useful Bits For a Drill / Dremel Rotary Tool
Vložit
- čas přidán 6. 03. 2019
- How to make with your own hands this three drilling machine bits:
1. rotary needle file
2. sanding disks
3. sandpaper flap wheel discs
Attention! Protect your eyes! The paper flapping petals sometimes break away.
Timing
00:03 Needle roll from a lighter
00:44 How to use
01:22 Hole-puncher for even center holes making
03:39 Rotary blade making
04:19 Sanding disks cutting
05:33 Example of application
05:47 Paper drums for flap wheel discs
07:34 Sanding sandpaper flap wheel disc gluing
08:43 Examples of grinding
See the like videos:
► Let's Make Metalwork Scriber, Punch and Awl - • DIY 🛠 3 Useful Tools f...
► Let's Make Regular Hexactinal Snowflakes of Paper - • How to Cut a Regular S...
► The Best Technique to Join Electric Wires Reliably - • How to Join Electric W...
► The IDEAS for DIAMOND DRILL BITS use - • IDEAS for 💎 DIAMOND DR...
► Electronic Boards Taking Apart - Total Disassembly - • 7 IDEAS and 7 TRICKS o...
Subscribe
═════════════════════════════════════
★ This сhannel: czcams.com/users/AmolonieX?sub...
★ Pinterest: www.pinterest.ru/AlmoisJobbing/
★ Instructables: www.instructables.com/member/...
═════════════════════════════════════
#JobbingIDEAS #WhatIsItFor? #HomemadeTools #howto #DIY #tutorial - Věda a technologie
10 minute video to remind me why I just get my accessory already made and ready to go !
the sanding disks.. I never would have thought of how to make them! Brilliant.
scissors??
@@kennybo-iy2ed no. not if you want a perfect circle, obviously.
Excellent!
You rocked it⚡
So you make tools to create tools. That's actually pretty damn cool.
This first creation is quite strong. Bravo
Очень люблю рукастых ,браво!
Very creative!! I like the way your brain works! Keep the video'/s coming.
Ya-ya, tastish-fontastish...
that's good thanks for you
Love the videos I just wish you would talk through them. Explain where you got the plastic tube and things like that
Would have thought that the cotton would have given you a clue
Well done, you are a genius Thank you very much
Волшебник!!!
Daaammnnn your Amazing, man
Very good ideas👍👍
Quiero ver tu cara. Demasiado ingenio en un cerebro. Gracias. Se ahorra mucho construyendo o manufacturado en casa los insumos costosos.
Ima try to make the one that makes sanding discs, that’s smart
CARO AMIGO GOSTEI,,,
Nice wee video👍🏻
I kinda like your little circle cutter for discs. I thought maybe sharpening the end of a pipe, but I your circle cutting jig is better, and easier. Probably don't run the Dremel at full speed with that on it....
Fantastic
браво! я даж не перематывал)
I love this reckless type stuff. I just use the Dremel to destroy stuff around the house. It’s a great stress relief. I carved up my kitchen table (absolutely crap job) with my initials. I thought it was funny but my wife was pissed
I'm all into reckless myself. I scratched cryptic graffiti into our bathroom mirror and sink using my Dremel and purpose-made bits. Not Dremel-related but I also tagged our brick walls. I now have nowhere to sleep and it's cold.
😂😂
Nice dude!
Looking for this kind of videos for a long time....Missing a few intermediate steps but subscribing and washing the rest....keep on man
Thank you!
ЧУВАК, ТЫ КРУТ!!!👍👍👍
Awesome 😎
Идея супер.
thank
clever stuff ... well done ... im impressed :-)
czcams.com/video/PWioB3h6gRE/video.html SIBIRIA СССР!!!
Genius
Kkkkkkk adoro isso☺️
Better uses than 5-Minute Crafts
Damn. I was hoping youd have a trick for the flap disc that would be quick and less labor intensive.
If you do a lot with steel, the 3m cubitron 2 in 60 git is incredible. Use it on my 1/2" x 18x powerfile
super
Just cut sandpaper and superglue to an old dremel sanding tube. So much easier.
The bit from a lighter is really hard. I use it to drill holes on glass. But the "cutting edge" would clog up if it is used on soft metal like aluminium, copper or brass, even at slow speed. It's too hard and too small to modify the cutting edges. Safely, at least.
The circle cutter was my fav and it wasn't even in the 3 haha
Too simple to make it, so bonus on the run :)
4 including the hole cutter
You are a genius! Thank you ❤️🇦🇺
Supar
..ДПРовский движок самый лучший..
👍👍👍
When you use a file do a stroke forward try not to pull it dulls the tool 👍👀
it looked like he was trying to put all his effort to pull the file back down which is dumb
Not bad
Здорово..!!!!!!!!!!!!!!!!!!
К.С.
I commend u
Pensé que al inicio tenía guantes de látex
All I see is the tip of your dremel, it looks homemade, I like it . I have a bunch of little motors but no soldering stuff or the knowledge of making one from scratch. You make yours ?
For the sanding disc, why don’t you use a 1” paper punch and a small mm hole puncher? Both available at craft stores. The metal grinder from the lighter was cool.
I think he's trying to do this in a way that doesn't demand spending more money on other tools to make the sanding discs and other accessories. I liked his idea rather than the stupid circle cutter I bought from Michael's that hardly works.
What for to buy punching units if you can buy ready-made discs?
What rotary machine are you using, i havnt seen this steel housing with that golden chuck
Excellent but how to insert the rod on the lighter stone is important
The petal nozzle made with your own hands will work up to 3000-5000 revolutions at 30000-35000 it will all break into pieces ! And may God grant you to wear safety glasses. For the manufacture of such attachments, you need glue as in the factories that produce these attachments. Not a glue for Wallpaper.
What's that second stuff for making hole on sandpaper for what
I think the grinding stone is dangerous, it's not rated for the high centrifugal force and could easily become a chunk of flying shrapnel. Great idea for the sanding discs though.
Yes, much of chips fly around, so I always use safety glasses.
I would think it would be pretty strong.
Probably fine for wood, plastics and softer metal like aluminum
Pls add information of diameter of tube and wrapping material for the last flapping drum made.
what metal is the lighter striker wheel made of?
wow dude! excellent! Plus the tune on this Vid' reminds me of Pamela Anderson's sexy anti fur PETA Commercial. ;)
czcams.com/video/PWioB3h6gRE/video.html SIBIRIA СССР!!!
I cut metal with scissor too
All creation are nice...
Thank you!
why use sanding disks? the flap wheel seems to be the better option to sand surfaces, when would you use the disk instead of the flaps?
I made a drill bit out of a candle wick's metal base
How i made dril Chuck I u r using please make video sir
стоит ли заморачиваться над этой мелочевкой...купил однажды десяток и хватит надолго
I made that same drill from a lighter
Годные насадки
And i have that same metal
What is the brass part on the punch? It looks familiar but cannot place what it is or comes from.
Looks kinda like a lamp knob or switch
It was a pole in an old electronic device. One end has a thread for a screw, another end was fused in a plastic case.
Последней насадкой я б точно не пользовался, очень опасная она ....
А по дереву?
А какая резьба внутри ?
Your crazy but crazy works lol,.man I have been making knifes alot lately. So I went to walmart got a 20$ dremel tool come with a few grinding stones one cut disk shaft and some sand paper disk .I'm breaking the cut off wheels so fast , I'm cutting slots in deer horn and slots in wood for copper and brass wire inlay . So cheap. And the sanding drum came with like 4 or 5 I used all of them in like 5 min. And then for some reason the shaft on the sanding drum all of a sudden while using it to widen a finger hole in soft metal bent so fast it now looks like an alen wrench . Didnt come with metal filling things . So what's the best way , can I make somthing work that's better quality.? Or just keep burning up all these cheap ones . I'm frustrated with all of them they really suk. I live 2 hour out in the country away from the closest city . All we have here is a doller store.. now 47 miles away theres an ace hardware, and a Walmart and a Sutherlands.. I will be heading that way to get some more shit for the dremel. I need it to work.for the finer things that a angle grinder cant do . I hate using a file for an hour strait to widen a finger hole.. any suggestion wood be great . I'm on a budget , meaning I'm broke, that's why I have an off brand dremel .( Hyper Tough ) it says. It does have variable speed , that's good. Question when should I use low speed ? I have that baby on high,all the time . Trial and error gets expensive and to far to drive..🙂thanks guys
Talk! You have some great ideas but no one knows what materials you used on most of your projects shown.
What brand of epoxy are you using?
Noname Foru proxi pol, or something like that
"POXIPOL" made by FENEDUR S.A., Uruguay
Too funny. You have a Dremel tool yet you use a file to sharpen that cutter. Hilarious! Would a hot glue gun be better to attach the sanding paper to your wheel?
That would just blow up in your face, use the yellow glue for wood, like titebond or any other light yellow glue
Hello how do you make this drill dremel house ? thanks Fabrice.
That is the motor itself, but you can use a pvc pipe
mac giver?
buy on amazon haha
а ченить полезное умеете делать ? Покажите как вырезаете по дереву, или ex libris делаете )))
Это не лавхак а догадайся сам. Это мое мнение
If you don't like to talk at least put text up explaining what the item is that you are using. Other than that, i loved your video and subscribed. 👍
To build these tools first you will need 50k in tools
czcams.com/video/PWioB3h6gRE/video.html SIBIRIA СССР!!!
BU yaptıkları bir ise yaramaz
Minik bebelere oyuncak yapıyor galiba
Убить пол дня чтоб сделать говно.
П О Е Б А Т Ь ! ! !
@@user-yd2pt4lf9f неее, П О Е Б Е Н Ь!
Ну склеечки видео доказывают эфективность, повторяю "эфективность" данного рукоблудия. Начало очистки - конец очистки. Это или не работает, или разлетелось все в лицо автора. Покупайте нормальный инструмент. Не занимайтесь ху*ней !!
а насчет бор машинки не слова как так(((
Great video showcasing great designs..... The worst music ever.
С камнем от зажигалки идея стара как мир, дырокол может быть полезен, а вот нафига заморачиваться с круговым ножом который спокойно берет напильник не пойму, почему не сделать дырокол по диаметру круга? А клеить лепестковый круг это вообще безполезная трата времени, уже давно известна конструкция с прорезями, куда собственно лепестки и вставляются.
what?! xD +1
CZcams ''bananasandpaper''
Нахер я это посмотрел?Не пойму
Потому что это это должен увидеть каждый, прежде чем умереть :)
Oh goodness me! I got the worst anxiety watching you use your homemade grinder with the screw heads sticking out of the chuck. Your thumb came so close to getting a chunk taken out of it. Yikes!
Стою на асфальті я в лижі обутий, чи то лижі не їдуть... Чи нахера я дивився оце кіно бля на...?!?!?!?!
Whats the song?
"Switch It Up" by Silent Partner from CZcams Audio Library
czcams.com/video/PWioB3h6gRE/video.html SIBIRIA СССР!!!
Редкая тупость
Make a tool to make a tool to make a tool, what the shit
мда есть здравые мысли а есть идиотизм
ты себе мозги склей как изнаждачки щетку может пригодятся для
you faked the first one
2:19 ew Kinda Weird Kind of Dust 🤮
Wasting time
I really can't imagine wasting this much time and being this cheap.
It's really the fun of making it for many of us. Perhaps if you're a pro woodworking making a bit of money your thinking would work. Yet, "cheap" is a cheap word to use here. If you can't appreciate something, stay off the channel. Don't cheap yourself with inappropriate words 🙏
To me it is just a video justifying to yourself why to bought a Dremel tool in the first place and then trying to find something you can do with it.
I wish I had never wasted my money on a Dremel because it is the most useless power tool I ever purchased. I've used mine twice in the ten years I have owned it and even then it wouldn't do the jobs properly because it was too small and the attachments are just toys.