I am very very grateful that I found this channel... It is a very very underrated channel... so useful such good content and crisp to point... i just love it
Very informational video. Learned a lot. Hoping your next video to be on the studio setup in vray as it was in your previous video... Eagerly waiting...
Thanks for the video. I think Round corner works better then the V-ray setting, although it's difficult to undo. Fredo Corner is even better coz you can repair the rounded corners, but you have to pay for it.
I really like your videos, they very informative but easy to understand. Suggestion for the next video: Realistic Fabric materials Velvet, Nylon, Wool, Cotton, Polyester, etc. Please make this video, I am struggling with fabric materials and want to find a way out.
Thank you very much for the tips.... If it is possible can you make a Vray 5 rendering video of exterior/interior from start to finish.... Your teaching method is really good it would be very helpful...
Just ran into your channel Great quality and really helpful Keep it up 😁subbed Oh if you could make a video about how to make natural daylight scene type of render with hdris would be awesome 🙇🏻♂️
It really depends how you optimize your scene. I'm running on AMD Ryzen 9 5900HX, 16GB, and 3060. Handles my scenes pretty well. But for Complex scenes it can take over 10min.
do you know how to do the same result of your "round edges in the bump map" but without a perfect shape..a dirty and irregular shape like for example a stone edge?
I've tried the "mix Operator" to mix both Edge and Splat to create the effect in the bump slot (bump material). I've had some results with it (not the best thou). But never say never, I've seen it done in 3d MAX so maybe it also possible in Vray for ketchup.
Thank you so much, i didn't know about bump material.
:)
I am very very grateful that I found this channel... It is a very very underrated channel... so useful such good content and crisp to point... i just love it
thank for share. very nice
Thank You!
*Очень полезная статья. Спасибо большое за урок. Смотрю с переводчиком) Казахстан.*
Thanks for sharing, you have another new subscriber here...
Welcome aboard Juan, :)
Thank u bro , have been looking for these kind of vdos and finally found ur channel 💕🙏🏽
Thank you 🙏🏿, glad I I'm help .
Awesome!
Thanks You Krzysztof :)
Amazing tip with edges. Thanks
Thank You, Glad you liked them.
One of the best videos I ever seen 👏Thxs dear
Thank You! :)
Thanks for your tutorial this video this is very helpful my life thank you so much
Thanks for the tips.. very helpful
Thank you, I'm glad it was helpful!
This is brilliant! Thank you!!!
😁😁😁
yay TQSM every tips is ah mazing
Thank You! :)
As of today, you've got a new subscriber. Great work.
Thank You and welcome to my channel :)
Bro, whats good fam..Can you do a video on camera positioning in sketchup for interior renderings.
Much respect, abraço forte!
Hello TN3D Studio, thanks for making these videos they helped me a lot!
Your welcome 😁, just sharing as i learn.
Very useful Tips. Thank you.
Thank You!
I really appreciate your work. Please can you do an in-depth video on how to achieve photo realistic exterior rendering with sketchup vray 5?
Working on it, definitely need more exterior tutorials on the channel :)
great video
Very informational video. Learned a lot.
Hoping your next video to be on the studio setup in vray as it was in your previous video...
Eagerly waiting...
There been tons of request on this, Its very simple so i'll try to cover that :)
Excellent video. Thank hou
Thank You!
QUALITY CONTENT
Thank You!
Thanks for the video. I think Round corner works better then the V-ray setting, although it's difficult to undo. Fredo Corner is even better coz you can repair the rounded corners, but you have to pay for it.
Unfortunately its no longer free. You cant overdo it with V-ray edge, it looks too fake. But it works well for me in most cases. :)
Thanks bro for giving Indonesian translate
❤
I always look forward to your videos with great appreciation, it teaches very well.
Glad to hear that! that really motivates me :)
Could you make a detail video about mesh light and where we can use other all lights and combination of lights to produce a realistic look?
Thanks for the topic suggestion :)
Really happy to become a subscriber of this channel... Thank you so much for your efforts to spreading knowledge.
Thank you for being a subscriber :)
I really like your videos, they very informative but easy to understand.
Suggestion for the next video:
Realistic Fabric materials Velvet, Nylon, Wool, Cotton, Polyester, etc.
Please make this video, I am struggling with fabric materials and want to find a way out.
Great suggestion! I'll work on it :)
@@TN3DStudio Please do, looking forward to it!
Very useful tricks for small detailing render 👌👌👌 loved your tips as always
Thank you 😊
Amazing video! I will try the edges bump.
:)
Thank you very much for the tips....
If it is possible can you make a Vray 5 rendering video of exterior/interior from start to finish....
Your teaching method is really good it would be very helpful...
Thank I'll do my best :)
great video, amazing rendering
Thank You! :)
Just ran into your channel
Great quality and really helpful
Keep it up 😁subbed
Oh if you could make a video about how to make natural daylight scene type of render with hdris would be awesome 🙇🏻♂️
Thank You! Glad you enjoyed the content. Have you watched the other videos on the channel, I beilive i covered this in two videos :)
bro pls fast start ...Love from India
Thank you! 😁
Really great tips!
Thank You :)
What computer configurations you have?
Laptop AMD Ryzen 9 5900HX 3.0 GHz, 16 GB RAM, RTX 3060. :)
Want to know about all the options in override material's
Will do 😁 thanks for the suggestion. Its a very interesting material.
Great video! Is it possible to hide the mesh clipper object in sketchup and get the same result?
I dont think that is possible at the moment.
Using the Edged corner by using bump map, does it get slower or faster to render instead of using round corner?
It doesnt slow your render that much, since its just an effect. Personaly i dont see much difference
@@TN3DStudio ok. Thanks
Hi tn3d… how can we add animated vegetation’s to sketchup scene and render it with vray?
I've never tried, but i'll have to look into that.
What a PC do you advice for fast Vray rendering. Will Ryzen 3900x and RTX 3050 work for under 10 minutes renders?
It really depends how you optimize your scene. I'm running on AMD Ryzen 9 5900HX, 16GB, and 3060. Handles my scenes pretty well. But for Complex scenes it can take over 10min.
@@TN3DStudio wow! I have i5 3570, 32G, GTX 750Ti 2GB and simple scene 360 4000x2000 takes 3+ hrs!
But I'm about to change to something Ryzen'ish...
wanna ask how to test lighting with override while having a windows? seems all glass also turned into solid and blocks sunlight
Hi Hendri, the glass material (every material) as an option to ex-clube from override
@@TN3DStudio thank you so much, didnt realise that option before you mentioned it. now it works
😁
do you know how to do the same result of your "round edges in the bump map" but without a perfect shape..a dirty and irregular shape like for example a stone edge?
I've tried the "mix Operator" to mix both Edge and Splat to create the effect in the bump slot (bump material). I've had some results with it (not the best thou). But never say never, I've seen it done in 3d MAX so maybe it also possible in Vray for ketchup.
I tried edging on my vray on both rhino and sketchup however it still show up as sharped edges... Will there be any solution for this problem??
Interesting, Should work just fine ( try on both GPU and CPU mode)
Can you please tell me about your computer specs
Currently using laptop AMD Ryzen 9, 16 GB Ram, RTX-3060 :)
are you on skill share?
I dont have a course on skillshare, but never say never 😉
@@TN3DStudio i hope you'll have one. so i can watch alot of tips from you.
Stay tunned 😊