Quads REAR AXLE REPLACEMENT INSTRUCTIONS - 110cc 125cc, 150cc Large Electric ATV
Vložit
- čas přidán 31. 07. 2024
- In this video I will show you step by step how to replace rear axle in 110cc 125cc 150cc and Large Electric Quads at home. I will also show you few tips how to swap the axle quick and easy.
Shop for mini bikes at: minibikes.store
Video Sponsored by: Nitro Motors
SUBSCRIBE to get latest videos about Mini Bikes
/ @minibikesstore
CONNECT WITH US HERE!
Facebook: / mini-bikes-store-37621...
VIDEO BLOG: minibikes.store/video-blog
Join our community “Mini Bikes International Support Group - Mini Pocket Bikes, Quads, Pit Bike”
/ 697980870366878
Please, support our channel with :
LIKE 👍
SHARE ✉
SUBSCRIBE ✔
Quads REAR AXLE REPLACEMENT INSTRUCTIONS - 110cc 125cc, 150cc Large Electric ATV
#JumperRG7Quad #MiniBikesStore #NitroMotors - Jak na to + styl
SHOP HERE 👇👇👇 🚚 Delivery to 32 EU Countries
minibikes.store/
Thanks for the video . I was hopping you change the bearings as well .
Very informative and helpful video! I get to do this job on the weekend. Look for the video! 😁 You have made it much easier!
You Rawk!
LuchMob! 🤘🏻🐿🤘🏻
If my rear wheel starts in the left to wobble around is it cause of my Rear Axle bent?
Thnkjuuuu bro so much you help me so much ❤❤❤❤
Awesome man
great to hear that it did help :)
thank you for this video, very helpful
you're welcome 😀
Nice video. 👍⭐️
What treads is on that axle
I have one but it don't have the nuts on it
on the 150cc atvs, what is the size of the rear axle bearings?
Ciao scusami come mai mio cud lem 200 mi gira asso della corona vuoto
Am un atv 125cf la care sa rupt axu de tot de dupa pinion e usor de schimbat axul?
Daca da e ok unul de genu?
Punte spate 750mm, diametru 30mm, flanșă 24mm
Siema mam pytanie bo mam takiego quada i zrobiłem to co ty na filmiku a ośka nie chce wyjśc jest możliwe że są tam jeszcze jakieś zabezpieczenia?
Witam, wiesz może dlaczego tylna ośka jest luźna ?Nakrętka dokręcona.Quad apollo avenger 125cc
8:49 the castle nut that holds the back wheels on and is held with kodder pin , how tight do you have to tighten the castle nut ?
50 ft pounds i only have an inch pound torque wrench so its 600 inch pounds also helps to put thread tape on the axle threads before torque and then castle nut then cotter pin
Do you have the part number of the axle??
were can i buy the axl
Dzięki przyda się do quada 110, ośka mi pękła w 2miejscach
Ciesze się ze moglem pomoc
@@MiniBikesStore pytanie czy tak samo to wygląda w 300 i wiekszych sprzętach ?
Link for the axel???
Fajnie by było gdyby pan tesz po polsku nagrywał
So this actually is made of copper
Wujek ty robisz tor
Fă un video în romana