How to take out the glass: No need to take out the buttons of the watch, the inner plastic housing and the plastic surround. And there is no need to fill the case with nail washer/remover! Just cut a thick pencil eraser the same size as the glass, don't overlap the steel housing. Put the eraser on a table with the glass on top of it. Then press firmly the case down and the glass will pop out. How to remove the solar: Use a q-tip with some alcohol and rub it around the edges of the solar. Let it soak for a couple of minutes and they will slide apart. How to put back in a new glass: Remove any leftover residue on the inner steel housing with a q-tip. Attach the solar with some double-sided scotch tape to the housing. Then put the black glass gasket in to place in the housing. Take the glass and gently push the corners. You can do this by hand or use a glass press. Cheers!
Azah Yaacob - use double tape for patch solar glass with steel case and then lay down the seal of glass to fix it in the position and lay down the glass and push it as same as GA series
thx for your fast answer. I have read the comments to late. :D the solar crystal has the double tissue (clear one I guess). And the main front crystal has a gasket, right? You called the gasket soil. I think now I got it. ;) All stuff was very helpful.
1) Solar glass use 2 faces glue tape (paper)
2) Front glass no need 2 faces glue tape, put black seal first to fit the case and put the glass later.
How to take out the glass:
No need to take out the buttons of the watch, the inner plastic housing and the plastic surround. And there is no need to fill the case with nail washer/remover!
Just cut a thick pencil eraser the same size as the glass, don't overlap the steel housing. Put the eraser on a table with the glass on top of it. Then press firmly the case down and the glass will pop out.
How to remove the solar:
Use a q-tip with some alcohol and rub it around the edges of the solar. Let it soak for a couple of minutes and they will slide apart.
How to put back in a new glass:
Remove any leftover residue on the inner steel housing with a q-tip. Attach the solar with some double-sided scotch tape to the housing. Then put the black glass gasket in to place in the housing. Take the glass and gently push the corners. You can do this by hand or use a glass press.
Cheers!
Hello, I want to know how can you put back a new glass after u ok the old one out, do you need some glue?
They called it seal I think there is a gasket for. What you if the gasket is bocken I do not know. :D
Hi. May i know how to put back the new glass after taking out the old glass?
Azah Yaacob - use double tape for patch solar glass with steel case and then lay down the seal of glass to fix it in the position and lay down the glass and push it as same as GA series
with seal you mean gasket, right? and you may know if all G`s have a gasket? Because I want to change my dw-6900 crystal. thx!
ของผมช่างแถวบ้านทำทัชโซล่าแตก ไม่รู้จะซื้อที่ไหนมาเปลี่ยน เศร้าเลย
เข้ากลุ่ม facebook : G-shock Thailand และลองสอบถามหาในกลุ่มครับ
นำไปใช้ถอดdw6900ได้ไหม
I want to fix my how much u charge
Nice tutorial now I know how to remove it. so I guess it is glued. Which type of glue you can use to put a new crystal in?
FlyinTreeTV It's double tissue tape
thx for your fast answer. I have read the comments to late. :D the solar crystal has the double tissue (clear one I guess). And the main front crystal has a gasket, right? You called the gasket soil. I think now I got it. ;) All stuff was very helpful.
ถอดออกแล้งใส่กลับยังไงครับ
Pijit Sakaew เข้า Facebook ห้อง King of G-shock (Thailand) มีไฟล์วิธีการทำและประกอบครับ
พอทราบไหมครับว่าใขควงตัวนี้ยี่ห้ออะไร รบกวนแนะนำซักตัวหน่อยครับ
_lh3.googleusercontent.com/X1lnid0AfovRj_Np3ySfZMcl6fUrR6hvT_9maPv-DSxlgbDVyXJzmazvaSr3rh4LdkQ8MD9PVQ_
วิธีนี้ใช้ DW6900ได้ไหม
Dw6900 ไม่ต้องแช่ครับ กดได้เลยออกแต่ออกแรงเยอะหน่อย