HOW TO INSTALL JBL BASSPRO HUB 12'' SUB WOOFER I TOYOTA COROLLA HATCHBACK/SEDAN 2019 2020 2021 2022

Sdílet
Vložit
  • čas přidán 7. 08. 2021
  • In today's installation, we install a JBL Basspro hub subwoofer. The great thing about this sub woofer is that it is hidden in the spare tire! I highly recommend to get this product! This isn't a sponsored video, 100% my genuine opinion as always! If you guys have any more questions feel free to DM me on instagram!
    bronz.back....
    Or leave a comment down below!
    The sound test part of the video got partially muted even though I used non-copyrighted music :( sorry about that guys!
    Big shoutout to E210 Kyle for being a HUGE help! If you don’t mind please check out his Instagram & drop a follow! :) : e210_kyle?...
    Products to make this video possible! : ( All links are Amazon Affiliate links!
    Thank you for supporting me and the channel! Appreciate you guys! 🙌🏾)
    JBL BASSPRO HUB SUBWOOFER : amzn.to/3ybETQ2
    Extra JBL BASSPRO HUB SUBWOOFER LINK : amzn.to/3lS4KZY
    8 Gauge AMP WIRE KIT : amzn.to/3f4k41E
    Wire harness Add-on to head unit : amzn.to/3x8Lo50
    RCAs : amzn.to/3BQX13Z
    CHEAPER but still good quality subwoofer : amzn.to/3itEdAa
    If you guys have any questions for the cheaper subwoofer, feel free to hit up Trizzy.e210 on Instagram! :)
    Trizzy’s Instagram :
    trizzy.e210?utm...
    Tools to make this video possible! :
    Magnetic 10MM deep socket : amzn.to/375RqJa
    Milwaukee Impact Driver : amzn.to/3i7iH48
    Cheaper but great Impact Driver : amzn.to/3BLYFnF
    Drill Bits : amzn.to/374SGw2
    Drill Bits (ALT) : amzn.to/371x9EB
    Crimper / Wire Stripper : amzn.to/3jbmKvN
    Great starter socket set : amzn.to/3l57Bi6
    Torx set : amzn.to/3BQTrqw
    Intro Song: Music by VALNTN - Mona Lisa - thmatc.co/?l=758F210C
    Instagram: Music by @loveval - Mona Lisa via @hellothematic
    Song throughout the video: Music by Ryan Little - Holy Water - thmatc.co/?l=641205CB
    Instagram: Music by @iamryanlittle - Holy Water via @hellothematic
    Sound Test Music : • Top 10 NCS | Bass Boos...
  • Auta a dopravní prostředky

Komentáře • 292

  • @TheSweetVillain
    @TheSweetVillain Před 2 lety +49

    There used to be a time when everyone was uploading here clips with just because of passion.
    Never seem anyone to respond to everybody in comment section and with such phrases , you are one of those who wanna live of youtube.

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +5

      Wowowow thank you so much man! I’m so honored that you can see that in me! I always try my best to be helpful & inspirational! Thank you for taking time out your day to watch my video & leave this great comment! Hope all is well! Take care! 🙏🏽

    • @downhillskier7
      @downhillskier7 Před 2 lety +4

      Learn from others experience as it is much cheaper! Example you have multi strand power wire that you tighten Allen screw buy the multi-strand wire will not stay tight you could either tin wire or use ferrule on the end of wire before clamping down in the fuse holder. Look at why all starter use star washer because they want a good connection sometime ground have star washer built in to provide a good ground. As journey mechanic for over 30 years I had to solve a lot of problems and instructor when an students get attitude they will eventually butt heads on problems that other may have the answers but is too stubborn to listen that when they have a taste of humble pie.

    • @Dev-op7kn
      @Dev-op7kn Před 5 měsíci

      Thanks for this! Saved me so much money. I got a rav4 5th gen they’re uses the same head unit. Your LOC did not need a constant 12 v power I noticed. Where do you get that harness?

  • @henrywhetstone8485
    @henrywhetstone8485 Před 2 lety +170

    Put the fuse close as possible to battery to prevent fire.

    • @juniorsierra7138
      @juniorsierra7138 Před 2 lety

      What is that bro

    • @domakmunda7931
      @domakmunda7931 Před 2 lety +13

      Right next to the battery in the hood would be the best place for it.

    • @Key_Capz_
      @Key_Capz_ Před rokem

      Nah it's all good👍

    • @Chino0420
      @Chino0420 Před rokem

      bro put that hoe so damn far 🤣

    • @Chino0420
      @Chino0420 Před rokem +2

      @@juniorsierra7138 its the plastic thing that goes in between the wires

  • @casio5658
    @casio5658 Před 2 lety +51

    Just a heads up the fuse is supposed to be next to the battery and not the amp

  • @christophersolis5061
    @christophersolis5061 Před 2 lety +30

    Exactly what I needed man, wanted a way to get a sub in without cutting or splicing Incase I ever need to go back to stock. Awesome video as always keep it up!

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +2

      Thank you bro! Appreciate you watching the videos 🙏🏽

  • @downhillskier7
    @downhillskier7 Před 2 lety +33

    You should use ferrule on multi strand power and ground wires and fuse should be as closest to battery in the engine bay. If a live unfused 12v power wire shorts due to accident it will catch fire. You should check on the other side before drilling. Grommet with shield should be used on power wire as fires happens during accidents.

    • @surreshk
      @surreshk Před rokem

      Can 2 fuses be a good option? One on each side?

    • @THASEN1
      @THASEN1 Před rokem +2

      That is how to not install a spare wheel sub

    • @dennis-br6vr
      @dennis-br6vr Před měsícem

      @@surreshkno use 1. As close to battery terminal. Don’t do anything else.

  • @casswellchabalala8236
    @casswellchabalala8236 Před 2 lety +3

    I like how one can save boot space 💯 but dude your infotainment is out of this world. On point and i love it

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +1

      Thank you for watching! Appreciate the support 🙏🏽🙏🏽🙏🏽

  • @hanniballecter4454
    @hanniballecter4454 Před rokem +1

    Excellent review, bass pro shop logo made me chuckle, congrats on your channels style, look forward to more

  • @Rebecca_The_Dragon
    @Rebecca_The_Dragon Před 2 lety +16

    Great video. If you can, I would redo your Fuse location, it should be as close to the battery as possible because all the wire between the battery and the fuse is unprotected and can burn up. I actually had a fire like that happen on my 70 camaro in the garage and I was lucky i had the hood up and was able to cut the cable.

  • @wayneheaney6271
    @wayneheaney6271 Před 2 lety +14

    Bro you should put the fuse by the battery not in the boot. If it archs anywhere in the car you will have a live wire burning with no fuse to blow. Nice vid bro thanks 🤙🏾

  • @zakuraayame5091
    @zakuraayame5091 Před 7 měsíci +1

    Know you pinned, old video, you mentioned in another (re: fuse placement) …
    Not asking you to rewire it, but suggesting buying and adding a second fuse next to the battery.
    This saves you from any issues with length (insert joke), gives you the protection against a short in the run, size appropriately for the load.
    I’ve done a lot of janky things installing stereo stuff in my cars in the 90s and this looks clean just for your safety if you haven’t get it done, I bet you could find a spot in the run of the wire where the risk of abrasion/wear is non-zero (no looms, plastic, rubber, electrical tape or otherwise)
    Keep ya head up and sharing your journey and experience with us

  • @FDB-
    @FDB- Před 6 měsíci +3

    My mans makes it look so easy

  • @TheHumanOnEarth
    @TheHumanOnEarth Před 2 lety +2

    Thanks for this video my dude, wifey bought a SE night edition today and looking for some accessories to add!

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Thanks for watching and supporting the channel 🙌🏽

  • @TrizzyGac
    @TrizzyGac Před 2 lety +1

    Ayee let’s go!!! The sub makes a huge difference. 🥵🥵

  • @jamesgrassl6121
    @jamesgrassl6121 Před rokem +3

    You’ll want some sound deadening to get rid of unwanted rattles and better output. Kilmat is what I used on my corolla. No rattles in a 1500 rms watt system.

  • @furs3l129
    @furs3l129 Před 2 lety +1

    Love this ! Gonna do this on my Corolla right after I install my component speakers

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Lessss goooo 😤😤🔥🔥🔥

    • @TJ-tz7wd
      @TJ-tz7wd Před 2 lety +2

      Component speakers? Can you maybe upload a vid so I can see pls :)?

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      If I ever get that… of course!!!

  • @fipinmi
    @fipinmi Před rokem +1

    It seems someone else noticed the 1st thing I did just and that’s to put the fuse as close to the supply or source (battery) as you can.
    The video has some good info and links tho so props there but yeah….
    The last thing you want is a live cable from a solid power running around and ready to spark or start welding because it was run under the car or through a firewall or trunk floor and there was no rubber grommet used or the insulation deteriorated or heaven forbid your involved in an accident or forced to drive over something that fell off a vehicle in front of you on the interstate that bounces up n Pierce’s the wire shielding.
    Just saying
    Thanks for informative watch tho n peace

  • @janjohnny4945
    @janjohnny4945 Před rokem

    Did you use the same AWG (10) as JBL included in connector or did use thicker? (Ground, power)? Can I combine a thicker with a thinner wire >ground power

  • @MillersMedia
    @MillersMedia Před 2 lety +1

    Omg this sounds amazing I need it!

  • @Tatus_legarius
    @Tatus_legarius Před 2 lety +1

    Thanks for this vid bro, I have been putting off a sub since I replaced and amped my door and dash speakers (tough for a first-timer)
    I am running a 400W 4-channel amp that has a sub out so all the wire work is not too. Bad. I think I might try the shallow variant of the Cerwin Vega spare tire sub to keep the floor flush in the hatch.
    Might just need to finally do some sound treating, my front door woofers are already rattling the car as is lol but love how everything has been plug and play, barely any cutting necessary to stock harnesses. Keep up the fire content!!!

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      That’s wassup bro! 🔥 thank you for watching bro! I appreciate you 🙌🏽🔥

  • @izzy.e
    @izzy.e Před 2 lety +1

    Great video
    (Edit: I hadn't seen the link you posted, so nvm.. thx.)

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Thanks bro! Seriously appreciate you! 🙌🏽🙌🏽🙌🏽

  • @beafmilk
    @beafmilk Před rokem

    Hallo is it possible to use the subwofer without the remote in the cabin? Or you have to always ajust the bass?

  • @user-kg1dc2nr2e
    @user-kg1dc2nr2e Před 8 měsíci

    Do you happen to know if the connectors are going to work for the 22 toyota camry? I asume since the infotainment system is similar, it should work but I'd rather ask to be sure.

  • @Angelr_1028
    @Angelr_1028 Před 2 lety +1

    Your sub sounds GREAT !!! It doesn’t do rattles or anything very clean sound

  • @downhillskier7
    @downhillskier7 Před 2 lety +2

    Use a star washer when grounding wire, use ratchet crimped as bad crimp will come undone during accidents and arcing live 12v is short to ground equals 🔥 FIRE.

  • @boogergreenglen
    @boogergreenglen Před 2 lety +9

    Great instructions! Do you think a newbie can do this and how long did it take for you to install this? Thank you!

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +6

      Thank you man! 🙏🏽🙏🏽🙏🏽 I do think a newbie can install this no problem! Just be patient & you will be proud of your work! 🔥 & honestly it took me like 3 hours Bc I like to record my videos with time and effort! But if I wasn’t recording and follow steps off a video, I think this should take no longer then a hour!

  • @TonyPrado
    @TonyPrado Před 2 lety +5

    Hey Giovani! So I just did your exact same install on my 2022 XSE with JBL package. Used all the same parts and it works great!! The only weird thing I’m experiencing is that whenever I turn down my main stock radio volume, the subwoofer volume doesn’t seem to lower at all. Any ideas what I did wrong or what’s going on?

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +4

      you did everything right! You would have to add an external amp to control both your sub and main volume. That’s why there’s a remote to lower the sub!

    • @Char-nx3de
      @Char-nx3de Před rokem +3

      Try to mess with the integrated equalizer on the screen pretty sure you can reduce the bass in those settings

  • @Char-nx3de
    @Char-nx3de Před rokem +1

    I've read a lot of reviews and I'm getting ready to do this same installation on my car when it arrives and I was wondering if you lose sound on your rear or front speakers cause the reviews says that this adapter only taps the 2 front speakers and I was wondering if using this adapter can you still use the buttons on the steering wheel or you also lose that? Regards.

    • @GeovanisGarage
      @GeovanisGarage  Před rokem

      Nothing is changed! Everything works the same for me! Just get that added bass!🔥

  • @BroVCam
    @BroVCam Před 2 lety +2

    How are the other JBL factory speakers? I see a lot of Corolla owners who are in to sound like us, at minimum, upgrade the dash 3.5s with the JBL 3020s. You feel the factory JBLs are sufficient, or change any? I'm looking at getting one of these soon, and adding that JBL tire sub like you did, and trying to see if any the JBL stocks needed upgrading too!

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +2

      They’re okay, they definitely could be better! I would definitely recommend upgrading them! I haven’t gotten to it but when I do I’ll definitely make a video on it!

  • @jms7585
    @jms7585 Před 2 lety +1

    I’ve seen this harness but did not want to buy it due to the fact that it said non-JBL. Thank you for verifying fitment. I do not believe they make a JBL harness. I will buy this for my 2020 Corolla sedan XSE with JBL. Thank you. Nice video.

    • @texanzillaable
      @texanzillaable Před 2 lety +1

      I have a 2019 xse hatch with jbl system and finding a harness has been a issue . Did this connection work even though it state it only works with OEM system ? Thanks and awesome video

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Works with OEM system like a charm! Works on all models for the corolla hatch!

  • @therealtpain90
    @therealtpain90 Před 2 měsíci

    That shit 🔥. Literally, as soon as that wire chafes 😂

  • @PlayingOutsideSomewhere
    @PlayingOutsideSomewhere Před 3 měsíci

    How does red battery grounding wire get to the battery once you’ve drilled through the fire wall? Behind the stereo? Under the steering wheel?

  • @MikeyG003
    @MikeyG003 Před 2 lety +1

    Dope car and great video bro...I'm sure it's pretty similar to install in 2022 Camry SE. I'm prob gonna get that sub and install using this video. The highs are good on base system, just need bass, it has like zero lol. Time to upgrade the daily haha

  • @ginodavis
    @ginodavis Před rokem +1

    Awesome video. good explanation. Is the sub giving independent out even if the amplifier audio is all the way to zero?

  • @fqa1824
    @fqa1824 Před 8 měsíci +1

    Hey Geovani, Where did you get the adapter that plugs into the head unit for the rca to plug into? Thanks

    • @GeovanisGarage
      @GeovanisGarage  Před 8 měsíci

      Amazon! All links are in description boss 🙏🏽

  • @BimmerFix
    @BimmerFix Před rokem +1

    Does this include an amp inside as well?

  • @SamTheFisherman1
    @SamTheFisherman1 Před rokem

    Hey man.. im in the uk.. seen all your vids 👍🏻👍🏻👍🏻 im looking for a wiring harness.. i cant find one available anywhere... any pointers to where i can get one? Thanks

  • @stealth.gr4
    @stealth.gr4 Před 2 lety +1

    Do you think a 16ft RCA would be long enough? Having decent cable management is a big OCD I've got.

  • @danblackman9287
    @danblackman9287 Před 2 lety +1

    I have a 2017 Toyota Corolla IM and have been looking for a good bass option… found post on scionform about a custom fiberglass box to contour the back on one side that I thought I might try to build but this looks nice…. What radio do you have? Since I got the older model car I don’t have Apple CarPlay and I want that! Maybe that one might fit my IM? But it’s in the dash so can only be certain size.

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      I’m not sure the specific radio that I have but I know it’s the same as the Tacoma & Camry I believe (the newest gen) & I’m sure there’s an adapter for the iM but you just would have to look for it! This is a great alternative to space save!

  • @Immortal_Legacies
    @Immortal_Legacies Před měsícem

    Where did you get the carbon trim for the radio display?

  • @benkelly8297
    @benkelly8297 Před 2 lety +2

    Just did the same install as you. Except for me the volume up and down does not work. Sub stays at one level at all times. How did you get around this?

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Hmmm that did not happen to me, I wonder what that is, have you looked that everything is secured tightly? Like all connections?

  • @Char-nx3de
    @Char-nx3de Před rokem +1

    So with this subwoofer you just connect straight to the head unit and the battery? You don't need an AMP? Or since you have the Hatchback JBL it comes with an AMP?

    • @GeovanisGarage
      @GeovanisGarage  Před rokem

      Straight plug and play bro! & the sub has a built in amp!

    • @Char-nx3de
      @Char-nx3de Před rokem

      @@GeovanisGarage also I know this taps on front speakers do you lose sound on the rear doors speakers?

    • @GeovanisGarage
      @GeovanisGarage  Před rokem

      It taps into the head unit, not the speakers! You don’t lose any sound quality.

  • @rubenvelazquez8013
    @rubenvelazquez8013 Před 2 lety +1

    What year is your Corolla ? I just ordered the sub and wondering if the amp adapter will work on my 2021 Hatch.

  • @germanrubio922
    @germanrubio922 Před měsícem

    What size bolt did you buy to fit at the end?

  • @ricardos2291
    @ricardos2291 Před 2 lety +2

    I will use some of the steps to install a DSP and amplify the signal to all speakers and tweeters and even add a sub. It will sound greater than great. These cars have a weak (in terms of power) sound system

  • @Minhas.s
    @Minhas.s Před 7 měsíci

    Jbl bass pro is more powerful in terms of bass or bass pro hub ?

  • @masonvevo.
    @masonvevo. Před 2 lety +2

    Do you happen to know how I could upgrade the Nav system on my Hatchback XSE to show the Navigation in the screen and have the compass in the MID? Not sure what parts I would need to order

    • @masonvevo.
      @masonvevo. Před 2 lety +1

      I don’t have the XSE Preferred Package like yours does

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      I don’t think you can upgrade. It’s a whole different ECU setup! Unfortunately you can swap it over.

    • @masonvevo.
      @masonvevo. Před 2 lety

      @@GeovanisGarage yeahh I saw in your vid that the back of yours has a different part number and some of the connectors on the back are different. I wish they sold that package where I live 😔

  • @richardkadadihi5647
    @richardkadadihi5647 Před rokem +1

    Good evening, what is the model of the rca converter and is it used to connect to a Camry 2022 stereo?

    • @GeovanisGarage
      @GeovanisGarage  Před rokem

      Not sure on the model but i have the link in the description. I’m not sure if it fits a camry

  • @bombsquad6242
    @bombsquad6242 Před 4 měsíci

    will everything work with the 2023 hatch with jbl?

  • @benkelly8297
    @benkelly8297 Před 2 lety +1

    Did you by any chance figure out if that head unit wiring harness works on both jbl and non jbl audio cars?

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +3

      Check out @ 18:12 , I hope I made it clear but it work for both 😭🙏🏽

  • @kinematics87
    @kinematics87 Před rokem +1

    nice job....

  • @brendanyue2187
    @brendanyue2187 Před 2 lety +1

    did you ever do anything to fix the wobbling trunk lid? if u did what did u do to fix it

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      I never fixed it Bc it’s not bad, it doesn’t rattle so I just left it as is!

  • @atillasari9894
    @atillasari9894 Před rokem

    How much Ampere is that fuse? I think mijn is to much because the subwoofer won’t go on and everything is connected like should..

  • @GoMaly
    @GoMaly Před 4 měsíci

    @GeovanisGarage Sadly, I missed the boat as I recently bought my Corolla 2020. Is there a chance you'll be able to help me find the Wire harness Add-on to the head unit, as it's nowhere available. Thanks, mate! I'm using your channel for some mods!

  • @furs3l129
    @furs3l129 Před 2 lety +2

    Just a quick question. Why did you opt to drill a hole through the car rather than going through the fire wall ?

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Well I couldn’t find a hole that went through except for the one in the wheel well. I didn’t have a jack or a jack stand to take off my wheel. So I decided to just make my own entry point!

    • @seismystic7159
      @seismystic7159 Před rokem +1

      ​@@GeovanisGarage So you don't necessarily have to drill it out? If you're not drilling it out, what would be the wiring path instead? Also, where do you plug in the red wire when it's in the engine bay?

    • @GeovanisGarage
      @GeovanisGarage  Před rokem +1

      You can do it through the fender liner! But that means you have to jack the vehicle up, remove fender liner and snake it in that way! Not hard just a little more work lol & that red wire goes from the positive battery terminal to the power on the jbl!

  • @deeeezel
    @deeeezel Před rokem +1

    Team no fuse yolo!

  • @chrislarios2902
    @chrislarios2902 Před 2 lety +3

    Hey man just wanted to say I love the videos. I have a 2020 6MT and I appreciate the content.
    Does the sub come with a pre amp? I actually had the larger version of the JBL bass pro 12 with the pre amp sub and I got it uninstalled. I currently have an 8” DD Audio sub with a 1000watt Audison 6channel amp. It hits much harder than the bass pro and takes up only a little space in the trunk.
    Sound quality wise I would look into something like that with a DSP (digital signal processor) to really enhance the music quality.

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Thank you so much man! Appreciate you so much for supporting the channel 🙏🏽🔥 yes it does! & really? That’s dope bro! 🔥 & this DSP thing, I’m gonna have look into it, I really want to upgrade my sound quality! Thank you for the advice! 🙏🏽

    • @chrislarios2902
      @chrislarios2902 Před 2 lety +1

      @@GeovanisGarage hey man i had a side question. Have you ever thought of getting a sun roof installed? I live in Portland and there is one good company that installs them and I’m thinking of adding one. They aren’t terribly expensive either. I looked online and saw not a single hatchback with a sunroof.

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      No never thought of it! Definitely now on my list!

  • @dino91001
    @dino91001 Před 2 lety +1

    help me with mine bro 😭 also, i have the sedan version of the 2020 corolla XSE, also jbl package. do you know if the fitting of the sub is better on the sedan to where it will not wobble when you put everything back together?

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +1

      It’s the same exact fitment bro!!! You got this 😮‍💨😮‍💨😮‍💨🔥🔥🔥

    • @dino91001
      @dino91001 Před 2 lety +1

      @@GeovanisGarage thank you!!

  • @BlitzAgar
    @BlitzAgar Před 2 lety +1

    Hey man I’m watching this video 2022, I know little to nothing about audio but I forshure want to add a sub to my rolla to enhance the audio sust a bit but a huge question do you need an amp for this sub?

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      No you do not! Follow this video step by step! Just put the fuse close to the battery terminal! I messed up and put it by the sub!

  • @florianellmayer
    @florianellmayer Před 2 lety +1

    Darf man fragen woher du die kabel fürs Radio hast ?

  • @ondrejgolian3190
    @ondrejgolian3190 Před 2 lety

    Hi guys. Could you help me finding that amplifier? The link doesnt work.

  • @inconito3444
    @inconito3444 Před 4 měsíci

    should you plug it into an amp knowing that it already has

  • @Ernesto3568
    @Ernesto3568 Před rokem

    Qué medida de Rin se puede instalar como mínimo, queda en Rin 14?

  • @skorpyo331
    @skorpyo331 Před 9 měsíci

    So want to do this after getting new prius. Or on my now prius 3rd gn.

  • @halfhalf6396
    @halfhalf6396 Před 2 lety +1

    Are you still able to fade speakers front to rear and left to right, especially with the fronts left and right after installing the adapter. I know they tap the fronts so just curious if that functionality is retained. Great video btw, already added the adapter to my cart just need to know that little detail before i check out the cart. Thanks!

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Yes you are bro! 🔥 no need to worry about anything at all!

  • @jimmyquily669
    @jimmyquily669 Před rokem

    Where can I find the harness adapter for a 2020 mustang?

  • @wolfgaming9664
    @wolfgaming9664 Před 11 měsíci +1

    this works fine with the jbl audio upgrade ?

  • @wrex4x4
    @wrex4x4 Před rokem +1

    Can you tell me what wheels are you running on your car I like them do they come 4X100😊

    • @GeovanisGarage
      @GeovanisGarage  Před rokem

      Here you go boss! 🙏🏽
      czcams.com/video/5I0jTK3pTEk/video.html

  • @coltr1
    @coltr1 Před 4 měsíci

    How do I remove the trim from the sides to run my wires?

  • @-emme-nguyen4404
    @-emme-nguyen4404 Před rokem +1

    Do we need a separate amplifier for this Basspro Hub to work?

  • @chrislewis1943
    @chrislewis1943 Před 2 lety +1

    Could I get signal from a rear speaker to the RCAs? I don't have aftermarket radio.

  • @sachinyadav1078
    @sachinyadav1078 Před rokem

    Will it fit in Venue S optional

  • @thejoshcarden
    @thejoshcarden Před 2 lety +1

    Where did you get all the carbon accents for your dash?

  • @NobleONE17
    @NobleONE17 Před 2 lety +2

    So the sub is higher with the hatch panel cover??? Do you think the sub would be perfect with cover and without the spare tire in place thus not having it play around...I don't like how it was showing uneven levels but still mad props!!! The normal radio adapter fits the JBLs 🙌🙌🙌

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Yeah if you take out the spare you wouldn’t have that wobble! Thank you bro! Appreciate it 🙏🏽

    • @ubreakitirepairit3569
      @ubreakitirepairit3569 Před 2 lety +1

      The spare tire may actually be needed to help the sound of the woofer travel upward and into the car.

    • @NobleONE17
      @NobleONE17 Před 2 lety

      So not having the spare tire to improve sound direction effects the Sub...
      Damn😞😞😞
      What do you say Gio?, another vid to show the difference???

    • @ubreakitirepairit3569
      @ubreakitirepairit3569 Před 2 lety

      @@NobleONE17 there is other videos where they show the difference.

    • @ubreakitirepairit3569
      @ubreakitirepairit3569 Před 2 lety

      @@NobleONE17 It's kinda similarly to how subs sound better when they face the back of the trunk, because they utilize the back of the trunk to bounce the sound waves back into the car. czcams.com/video/Q25syXC5yhE/video.html

  • @jhinfufu1968
    @jhinfufu1968 Před 2 lety +1

    Can you get the jbl system that already came with your car separately?

  • @kingmessi392
    @kingmessi392 Před 2 lety +3

    Bro where did you get your floor mats

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Got them from F1 mats! Here’s a link to them!
      czcams.com/video/5cAVw9BOyQY/video.html
      There’s a discount in the description!

  • @isaiahrenteria1519
    @isaiahrenteria1519 Před 2 lety +1

    do you know if this will work on the SE hatch?

  • @yournightmare9999
    @yournightmare9999 Před 5 měsíci +1

    Can i use power from trunk cigarette outlet 12V ?

  • @daviddiaz-cv1tj
    @daviddiaz-cv1tj Před 2 lety +1

  • @kameloxus
    @kameloxus Před 9 měsíci

    Dlaczego nie pociągnąłeś zasilania z gniazda zapalniczki w bagażniku? Myślę, że to było byl lepsze niż wiercenie dziury w karoserii.

  • @X-pass1ve-tyme-X
    @X-pass1ve-tyme-X Před 2 lety +1

    Cant seem to buy the wire harness add on, another suggestions? I have a corrola 2021

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Just checked the link and they still have some! Check the link in the description!

    • @X-pass1ve-tyme-X
      @X-pass1ve-tyme-X Před 2 lety

      Heyyy no, it says currently out of stock

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      It says 12 left in stock when I click the link!

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      www.amazon.com/gp/product/B087Z1794K/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=asvpgeovani10-20&creative=9325&linkCode=as2&creativeASIN=B087Z1794K&linkId=dfdf8422be24fb504156aca054d40b46

  • @rubicon1889
    @rubicon1889 Před 2 lety +1

    Where did you get the conversion harness?

  • @famjam5804
    @famjam5804 Před 10 měsíci

    The fuse should be within 6 inches of the front. If it shorts, it's going to melt all the way from the front to the back. High probability that it melts your carpet.

  • @0bzen22
    @0bzen22 Před rokem

    Why not just using the speaker -> high level inputs? No remote trigger cable needed (auto sensing), no line level converters, that's what I intend to do.

  • @rmgrimshaw23
    @rmgrimshaw23 Před rokem +1

    Did you wrap the steering wheel?

  • @trucavalier
    @trucavalier Před rokem +1

    That’s a very nice car no way I personally am going use that boss fuse holder. 4gu ofc wire with anl crimped lugs with anl fuse.

  • @Supaxzp
    @Supaxzp Před 2 lety +2

    You wrap it all in carbon or these are actual parts? Link for either one lol 💪

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      It’s actually carbon fiber! I got you the link! Make sure you choose if you have XSE or SE. There’s a difference!
      www.carid.com/2020-toyota-corolla-dash-kits/b-i-2d-dash-kit-1832408107.html?parentsubmodel[]=SUBMODEL|XSE

  • @vincentleonardo2185
    @vincentleonardo2185 Před rokem +1

    Who makes the harness or do you have a link?

  • @bertzon1573
    @bertzon1573 Před rokem +1

    Where did you buy this plug and play connectors?

  • @dshyon
    @dshyon Před 2 lety +1

    Is that a 6 speed manual or automatic corolla?

  • @johncedrickmarinas534
    @johncedrickmarinas534 Před 2 lety +1

    Would you mind! giving out the links for your carbon fiber interior covers?

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +1

      Yes sir! CZcams for some reason doesn’t like CARID links so all you have to do is go to CARiDs website, put your vehicle, go under dash covers & select the “real carbon fiber” option

    • @johncedrickmarinas534
      @johncedrickmarinas534 Před 2 lety +1

      Thank you im a friend of kori e210 in instagram thats and i talked to trizzy thats why i know you haha thanks man!

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety

      Ay those two guys are legendary! They both have the cleanest car in their color! 🔥 tell them I said Hi 🤣🔥

  • @yolkbrain
    @yolkbrain Před 2 lety +4

    Whoa I've never seen a sub like that! Is it difficult to remove the spare tire?

    • @GeovanisGarage
      @GeovanisGarage  Před 2 lety +2

      Yeah right? Super convenient & space saving! 🔥 it’s super easy to remove the spare! Just disconnect the sub & you’re good to go!

    • @yolkbrain
      @yolkbrain Před 2 lety +3

      @@GeovanisGarage I agree man, way better than a bulky box

  • @sambulucci
    @sambulucci Před rokem +1

    It sounds good?

  • @MillersMedia
    @MillersMedia Před 2 lety +2

    And I stuck it in (daddy chill) probably halfway🤣🤣

  • @TRATAL82
    @TRATAL82 Před 2 lety +1

    How do u use the spare tire when the wires are on top of the tire

    • @spyrosbellos2522
      @spyrosbellos2522 Před rokem +1

      You unscrew the bolt that holds the sub and tyre, take out the sub, take out the tyre, Install tyre, take tyre you uninstalled, put in in place, put sub inside, screw the bolt to hold them in place, done. The wires will probably move out the way with the sub, if not just remove the connector from the sub and move wires out of way

    • @GeovanisGarage
      @GeovanisGarage  Před rokem

      That’s exactly how you do it! Thank you spyros! 🙏🏽
      Sorry for the late reply @TRA TAL, I did not see this comment!

  • @rudolfj.3347
    @rudolfj.3347 Před rokem +1

    Great Video! :-)
    Have you got a Amazon link for the High-Low-Adapter for me? Thank you!

    • @GeovanisGarage
      @GeovanisGarage  Před rokem

      Yes it’s the description! & thank you for watching 🙏🏽

    • @rudolfj.3347
      @rudolfj.3347 Před rokem

      @@GeovanisGarage I looked in description before, I couldn't find it ... I'm going to look again

    • @rudolfj.3347
      @rudolfj.3347 Před rokem +1

      @@GeovanisGarage thanks...yet I found it! :-)

  • @davidfelix3851
    @davidfelix3851 Před rokem +1

    would this be a nice compliment to 2 other subs.

  • @SmartAutoDetailing
    @SmartAutoDetailing Před 2 lety +1

    Does it sound good?

  • @fw1367
    @fw1367 Před 2 lety

    Hey. The fuse is going in the front of the car near the battery. Not at the sub.

  • @markodimitrov625
    @markodimitrov625 Před rokem

    I cant order from amazon to my country can you please tell me exactly which wire is the amp from the factory harness

  • @DJDXD
    @DJDXD Před 8 měsíci +2

    How do u have a JBL Headunit