Video není dostupné.
Omlouváme se.
Milwaukee m12 soldering iron review
Vložit
- čas přidán 8. 04. 2021
- Amazon affiliate link:
USA: amzn.to/3eQI33i
Australia:amzn.to/3v8y4gc
This is the milwaukee m12 soldering iron. Part number M12si-0.
I take you through the features and how well it works on 0.75mm up to 3 x 2.5mm cables.
If you're chasing the soldering iron, make sure to check out the packout kit that comes with the iron and a battery.
------------------------
Should you buy the m12 drills:
• Milwaukee m12 vs m18. ...
Inside my veto pouch and bag: • Veto pro pac Mc and mp...
Packout addictions: • Milwaukee packout esse...
Making my workbench: • How to build a rolling...
------------------------
Stay tuned for more tool reviews and diy ideas.
Leave your questions, recommendations or comments in the comment section.
For all my links including Instagram, tool recommendations and discount codes, click below.
linktr.ee/Addi...
#tools
#milwaukee
#soldering
M18
electricalapprentice
electrical
builder
carpenter
sparkie
electrician
tradesman
datatech
workinghard
tools
toolsofthetrade
brisbane
tradie
toolporn
journeyman
sparkylife
addictedtotools
handyman
sydneytools
tradetools
totaltools
Man shed
Shed
Tour
DIY
Home
M12
M18
Thanks to you Just got one, love it to pieces. nice to finally get rid of the cord, done messing around with butane I'm running a 6 amp hour m12
Very good demo ! I normally use the larger soldering tip unless I’m soldering onto circuit boards.
Unfortunately I’ve had two failed devices in the last few months.
The iron starts up , showing the battery status , then switching to green.
And that’s it. It doesn’t heat up.
The 152 degree / 240 volt / 15 5 thermal fuse was blown.
Easy enough to replace.
Cmon Ireland (the oval ball).
Tip: conical tips are bad for even heat distribution. That's why you struggle with lead free solder. Use flat or chisel tips, tin the tip and use the melted solder to transfer heat into the wire.
Thanks mate. I’ll have to give it a go. I don’t do a lot of soldering so the more info the better. 👍
Same wider tip for removing solder ?
I agree. I only use chisel tips. To add to this, I believe the term you want is to “tin” the copper.
Im on my 3rd one now. I never abuse them, but they have all suffered a thermal fuse failure. The last fuse I changed myself, which were £3 for 4, rated at 152c.
Thanks a lot for your review, you helped me decide to get one !
Good Review. I have been using an Iroda Solderpro gas iron which I love. For me the iron seems a bit big for the smaller work I do out in the field. Thanks for showing real world heating examples.
Thanks mate. It is a lot larger and can be awkward. It’s mainly the convenience that helps.
Are you saying "tint"...?
Its "tinned", you tin the wire
Sweet soldering iron, love the stability on the big battery base
Yeah mate, I just looked and I was saying tint. Cheers for the pickup. 👌🍻
I used mine everyday for three years , the fuse went and I replaced it two years ago it was worth what I paid for it in Canada $90
I bought one to replace my gas weller soldering iron , it’s brilliant , 6ah batteries make it stand up
i started like 4 months ago doing Av work and i was told i will soon solder some cables to terminate them into speakers. I wanted to see if the tool was worth it but i’ve seen across many videos the tool was worth it but you have to know how to use it in order to prolong the span-life of the tool
I had one and returned it .. I use it for leds lights and it was a struggle since the tip didn’t get hot enough I would had to tap on the lower when soldering.. 😢
Great review! Looking to buy this bad boy rather than running a lead for my 240v every time 👍
Thanks mate. I did the same. Love the convenience.
I love mine, it works super well, I am hesitant with the many users who had a melted plastic coupling, this has been a non issue for me thus far, but functionally it works fantastically and super quick
Great video once again, Specially like the way you test tools in a real world application gives a much more honest review
Cheers mate. I appreciate the feed back. I’m trying to give enough feedback to help out as much as I can.
get a pinecil instead they're awesome!
I use one , every now and then . Much safer than gas .
A lot of bad reviews of it melting n flashing green light but not turning on
It’s so expensive. But I’m still gonna but one.
Rubbish old technology, way too chunky, better getting a iron with heating element in the tip and that can run off powerbank
what do mean by that ,i want to buy one ,i looking the best because electricity is not stable in my country
Ceramic heating element. No temp adjustment.
Check out a ts 100,101, or pinecil v2. Power with 12-24v power tool battery for field work.
@@johnorji556 if you really want me to recommend one then you need to buy from china unless it’s available in Amazon or eBay on your country or maybe a website in your country has one, what I meant was it’s way too big too hold and use compared to other portable irons, it’s old technology and the heating element is in the iron and not the tip so will take longer to heat up, heat transfer isn’t great , no temp adjustment and performance is poor and so on, you can buy better for cheaper which will work with powerbank or if you really want rechargeable then it’s available but ones that use power banks are cheaper, I recommend one that uses C245 tips as there’s 100 different tips available and performance is great , Alientek t80p or FNIRSI HS-02 are the best.
Just remember these work with PD65w powerbanks or even 100w and tips can run at that watts.