This time I am hope I can show you how a piece of 5" x 6" leather can be used to make a very simple key holder. When the key holder is opened, the width is 5" (approx 13 cm) and the length is 3 1/2" (approx 9 cm); When it is closed, the width is 1 1/2" (approx 4 cm) A brass D-ring for key rings, and a brass trigger snap hook for attaching to something secure... hope you enjoy
garyipip Great vid man. Even if i dont have the tools, i learned from you how to double saw with needles... I will try to make something simmilar folowwing your tutorial. fingers crossed, i hope i can do it...
Gary, I finally made one of these key holders. I adjusted the dimensions to fit my bigger keys. Thanks for the great idea and the step-by-step instructions
В место колец лучше ставить карабины, подвижность такая же а места займут меньше и вместе наружного карабина надо поставить что то сложнее открывающееся чтоб карманники не расслаблялись :)
that was great! could you list the materials - including your preference of leather, glue, etc. I'm just starting this idea out and need to make sure i got the right stuff.
+Alex Kojfman Thank you!!! The leather was a piece of 1.5mm thick vegetable tanned cow leather; it was dyed with deep brown color when I bought it; the buckle and D ring were brass; with two ordinary snaps for closure!!! Any glue used were "Rubstik contact adhesive"
+garyipip When in doubt, Rubstik it. Great video. When you set a decorative snap or concho, are you using a special anvil that won't mar the design? Thanks.
Good work, Gary. I'll have to figure out dimensions, does the 5"x6" include the tabs for D-ring and snap? I really like this project. Thanks for sharing.
Hey, I have a question. I would like to start leatherworking but not familiar with tools, so in order to build this key holder, can u list what items need to make this key holder?
you will find good stuff from those traditional shops from sham shui po, but not from those fancy decorated shops, they have good stuffs, but way too expensive!!!
This time I am hope I can show you how a piece of 5" x 6" leather can be used to make a very simple key holder.
When the key holder is opened, the width is 5" (approx 13 cm) and the length is 3 1/2" (approx 9 cm);
When it is closed, the width is 1 1/2" (approx 4 cm)
A brass D-ring for key rings, and a brass trigger snap hook for attaching to something secure...
hope you enjoy
garyipip Great vid man. Even if i dont have the tools, i learned from you how to double saw with needles...
I will try to make something simmilar folowwing your tutorial. fingers crossed, i hope i can do it...
Gary, I finally made one of these key holders. I adjusted the dimensions to fit my bigger keys. Thanks for the great idea and the step-by-step instructions
iceman Congratulations, will you consider making a video of it??? we may share our experiences!!!
La verdad que me gusto un montón este video!!!!
thank you gary! enjoy all your videos very much!
jimli2000 Thank you, I am motivated...!!!
i like how he thinks of it as simple
Thank you for taking the time to film and upload this.
Thank you very much!!!
Thank you so much for this video. I made this for my college project ❤️
Thanks for making that! I will have a go sometime soon.
Kerri Hickman Thank you for sharing it... I am glad you like it!!!
Nice job thank You I will make one today again Thank You from an old man in the U.S.A.
thank you for sharing. it's simple and nice..
This is gorgeous!
Thank you very much!!!
I love this thanks for sharing you’re skills
Thank you very much!!!
Very good working ❤
Thank you so much 😀
Большое спасибо! Очень интересно!
ЗАМЕЧАТЕЛЬНО!
В место колец лучше ставить карабины, подвижность такая же а места займут меньше и вместе наружного карабина надо поставить что то сложнее открывающееся чтоб карманники не расслаблялись :)
If I had these materials right now I would make it
Thank you so much. You are great ! Want some more, please .
Thank you very much!!!
great video, thanks for sharing!
good idea, and excellent video
Excellent, good work ..
You are an artist
Thank you very much!!!
lindo trabajo ...lo unico malo que los moldes que muestran no tienen medidas
that was great! could you list the materials - including your preference of leather, glue, etc. I'm just starting this idea out and need to make sure i got the right stuff.
+Alex Kojfman Thank you!!! The leather was a piece of 1.5mm thick vegetable tanned cow leather; it was dyed with deep brown color when I bought it; the buckle and D ring were brass; with two ordinary snaps for closure!!! Any glue used were "Rubstik contact adhesive"
+garyipip When in doubt, Rubstik it. Great video. When you set a decorative snap or concho, are you using a special anvil that won't mar the design? Thanks.
الله يعطيك العافية وينصرنا عليكم اجمعين
is this strange to use for a car key? The whole thing hangs from your steering column - is that distracting? (or can you close it up with 1 key out?)
Nice. Awesome idea
Thank you!!!
Me gusta mucho, me puedes informar las medidas, gracias
Nice video, thank you
alekos01 Thank you!!!
Boa Noite qual o nome desta ferramento para colocar os batões de pressão. Obrigado pela Atenção.
Good work, Gary. I'll have to figure out dimensions, does the 5"x6" include the tabs for D-ring and snap? I really like this project. Thanks for sharing.
John Galv Thank you!!! Yes, 5"X6" included everything, it actually depend on how large you need!!! Happy stitching...
THIS IS FANTASTIC. WOULD THERE BE ANY WAY I COULD GET A COPY OF THE TEMPLATE YOU USED, OR WHAT ARE THE MEASUREMENTS OF THE TEMPLATE
+Daniel Schier Thanks a lot!!! I haven't got the time to organize the patterns yet!!!
Браво!
How was it folded ?
Thank you for sharing this useful video. How big (breadth and length) are the "tongues" which are folded and sown? Are they the same size? Thank you!
+Andrei Gotia Thank you!!! The size of the part which you are referring to depends on the size of your buckles, mind was approximately 22mm!!!
do you happen to know the era in which these were most used?
Thank you
Thank you very much!!!
Hey, I have a question. I would like to start leatherworking but not familiar with tools, so in order to build this key holder, can u list what items need to make this key holder?
Thank you very much!!! please go to my channel and I have a video about tools!!!
@@garyipipwhat is the name of your chanel
please tell us what tools you used in this vid so that i can buy one, also, state their uses. thank you very much!
Thank you very much!!! please refer to this:
czcams.com/video/4zKomtV4vFY/video.html
Do you take orders??
Where would you suggest buying leather from?
does anyone know how to remove those hardware buttons? the ones used with the circle tool that had to be hammered down?
Can you suggest for me some other material without leather to make this holder. In my place they aren't selling leather anywhere.
+Minh Tuấn Hi, any fabric which stiff enough should be good!!! I haven't try anything other than leather!!!
Thank you
canvas could be a good substitute.
Hi am from Pune, india would like to buy this can you share the price please
I would like to buy one of your key holders do you sell them
Hi,
which size is the brass trigger snap hook? Thanks in advance.
Подарите мне такую ключницу
👍👍🇲🇦
Where can I buy one?
hola excelente. me podrias dar las medidas de esa plantilla.
+jr sm Thank you very much!!! the dimension depends on your key sizes, it's approximately 4 x 6 inches!!!
i want same
А карабин зачем альпинистский присобачил. Шутка конечно. Великоват карабин, а так все окей.
Do you have a template for this?
what kind of glue are you using???
+SERDAROTmkd The glue is called "Rubstik Contact Adhesive"...
想請教一下香港那裏買皮較便宜?
you will find good stuff from those traditional shops from sham shui po, but not from those fancy decorated shops, they have good stuffs, but way too expensive!!!
IS there a website to buy?
I am afraid not at this moment, thanks!!!
nice job o you have a template
what ounce leather is that ? :)
+Freddie m That was 1.5mm thick, I am not sure how much oz was it!!! Best regards.
Hi. Do you have free template for this?
Que medidas tiene m e las podrá pasar por favor
Bro,what kind of glue?
Thank you very much!!! please visit to my channel and I have a video about glue!!!
Where do you get your templates?
I made the pattern based on my own needs, like numbers and sizes of keys to be put inside!!!
garyipip tell me the size pls.
jingly bulky keys...
Отлично