Video není dostupné.
Omlouváme se.
Measuring Track Power at Chadwick Model Railway | 101.
Vložit
- čas přidán 25. 06. 2020
- Measuring Track Power on a DCC layout or DC layout at Chadwick Model Railway
Patreon Link. www.patreon.com/bePatron?u=15...
Donation Link. paypal.me/ChadwickModelRailway
www.dccconcepts.com/product/a...
www.amazon.co.uk/shop/chadwic...
Affiliate Links.
Heat-Shrink Tubing Printer amzn.to/2B87Sfu
Printer Heat-Shrink Tubing amzn.to/3duEuwX
Ferrule Crimping Tool amzn.to/2TpJ4FU
12 way Terminal Block amzn.to/39IZNd5
8 way Terminal Block amzn.to/2Q7NxeJ
Plug-in Terminal Blocks amzn.to/2zjyA3L
WERA Screwdriver set amzn.to/2ZX0VJu
Magnetic Clamps amzn.to/2Nczc0y
Makita Drill amzn.to/2ZSJaLr
New Battery Dremel amzn.to/32CC8r4
Sculptamold amzn.to/2Wh5RGr
Bosch Hot Glue Gun amzn.to/2VWtK6X
Polystyrene Cutter goo.gl/GpWgWp
Iwata Airbrush goo.gl/P1ABXd
Compressor amzn.to/2MKItc1
Com Art Paints amzn.to/2KFuDKn
Laser level amzn.to/2KRA5Y9
Soldering Iron amzn.to/2F2EmUl
Helping Hand amzn.to/2qOt0Oy
Miniature Camera goo.gl/UzYWp6
Optical Visor goo.gl/ljSzBi
Magnifier Table Lamp goo.gl/seg8Dj
Fire Extinguisher amzn.to/34FEBCN
First Aid Kit amzn.to/2AhaWSk
Video Gear
Video Camera (4K) goo.gl/Q36cAY
Microphone goo.gl/RqY6MR
Old Sony Camera goo.gl/r8ao7k
The home-made fish-plate tool, one of those 'light-bulb' moments :-)
The trouble is Steve, it’s never one of my lightbulb moments
Hi Charlie 👋 I really like this particular video and I shared it with the gentleman that built our panel for the club. I think I will actually use every thing that you shared on my layout too. And particularly the rail clamp installer. Couldn't remember your name for it, sorry. LOL
Chris Mitchell I'm so pleased that you found the video useful.
Regards Charlie
Hi Charlie, A Cool little tool for fitting fish plates,😊 I would fold a loop on the end you hold to stop potential stab injury. The DCC concepts Alpha meter looks a great product for monitoring the voltage and current drawn on a layout. I have a Lenz system and monitor my voltage and current at the transformer before it enters the DCC unit, this monitors all current drawn. Keep up the superb videos. Regards, David.
I'm so pleased that you enjoyed it David. Stay safe. Regards Charlie
What on earth could those two people have found to swear and curse about? Your channel is one of the most relaxing, uncontroversial and gentles channels out there. I can't imagine how I could even become "a bit cross", let alone descend into a full, foul-mouthed rant against you!
They just try to get a rise.
The trick is never to reply.
Across the pond we call these types trolls😂
@@openeyes-411 I'm not sure which side of the pond you inhabit but the term is used here in the UK.
@@thomasm1964
I'm in the U.S. - I figured the term was englishly universal, but thought I'd identify myself, lol
@@openeyes-411 We should both thank the Scandinavians for inventing the nasty cave-dwelling, bridge-squatting little critters in their folk mythology. Otherwise, we would all be lost for words!
What an amazing little tip for fixing fish plates. Thanks Charlie. _ i be caught up soon I promise
Yes, the cheapest tool that I’ve ever made. Regards, Charlie.
I have seen this device used before and I think it is a "must-have" for anyone with or making a DCC layout. I have looked through DCC Concepts Website and they do also cater for those, like me with DC layouts or the building of one. I have just read the comment below mine. There are now 11 Thumbs Down, but they never leave a comment to say why? Please do not think it is you, Charlie, I have seen the same on other Model railway CZcamsrs. Martin. (Thailand)
Yes it is rather sad that people do this Martin but hey I’ll get over it. Regards Charlie
(Time stamp 28 Minutes)
Hi Charlie, that was an interesting way to tag-text cables.
Me and my friends also put tag text on our cables but at a fraction of what your marking machine costs, how do we do it?
Well, we do the following:
A; Buys transparent/clear shrink hose.
B; Prints the text that the cable will have with a standard printer with office paper.
C; Cuts the text from the paper.
D; Puts the rest of the paper back in the printer.
E; Cuts the transparent/clear shrink hose to cover the paper strip.
F; Lay the paper along the cable and pull over the transparent/clear shrink hose over the paper with the text.
H; Heat up a little and we're done with the markings.
Cost to mark a cable in 4 places will be ~0.17GBP
I never knew about clear heat-shrink until I put out this video. Where on earth have I been!
Thanks Charlie - very informative, clear and entertaining as ever. I'm between layouts at the moment, having moved from a spare bedroom (no longer 'spare' with the arrival of grandsons), to a limited space in a partitioned part of the garage, to a nice long run in the attic, which I now have difficulty accessing - so I have ordered a 12' X 10' insulated garden shed which will arrive in the new year. That will probably be 'it' - the final project that will see me off the planet. So in the meantime I am catching up on your videos to ensure that I have a running start when I start making the new layout - many thanks for your inspirational advice! A parting tip for those who don't have access to a printer - I use short sections of white electric cable sheathing with the inner wires removed to group and identify my wiring, written on with an indelible pen. Cheers!
A great tip Phillip. Regards Charlie
Hi Charlie, re: the heat shrink labels...
I just print onto plain paper, cut to appropriate size, pop the label onto the wire and use clear heat shrink to hold in place. Very simple, everyone with a computer and printer can do it and normal heat shrink tubing is so much cheaper than that stuff needed for your Brother label printer.
Great point Ian, I never knew you could buy clear Heat-Shrink.
@@ChadwickModelRailway It's good that an ex-fish head can be taught something new by an ex-crab :-)
@@hughjardon5101 , Doesn't often happen that a Crab can teach a Fish-head (particularly a WAFU) anything, so it's always welcome! ;-)
Hi Ian, Agreed, Definitely a much cheaper and still reasonably easy method. I use the same method in Data Cabling
I'm late to the party but I feel the need to correct you, respectfully, on something. AC stands for alternating current, which DCC is (above and below 0v means current flows both ways). It is a square wave, but waveform has no effect on if something is AC or DC, only which way the current is flowing. Think back to your brake van. If DCC were DC rather than AC and you were on an isolated track, say a programming track, the brake van would not need a bridge rectifier as one wheel would always be positive and the other always negative but as it's AC you have to have the rectifier to change the current from AC on the rails to DC to the lights, complete with correct polarity on the LEDs.
Other than this one thing, you're bang on with how you are describing things and please keep up the excellent work. You've taught me much and are my favorite model railroad CZcamsr out there. Second favorite once I post my own video but I wouldn't expect different from you were things reversed. :-D
Even so, I doubt I'll stop looking up to you.
Source: Former electronics tech.
An excellent comment although I will disagree. Getting technical DCC is square wave DC gong from 0v to 15v. It doesn’t alternate from -15v to +15v.
Regards Charlie
Another great video. For about the price of one or two cups of coffee, supporting your channel is a worthwhile investment. You have prevented lots of derailments, short circuits, glued fingers, spoiled tee shirts and lots frustration and wasted time and materials. Thanks again.
Thanks Peter, that’s very nice of you to say so. Regards Charlie.
For 40+ years I've cursed about sore fingers caused by fishplates, but now; never again.
Thanks Charlie this must be the best tip I've ever been given!
I’m so pleased you found it useful Brian
Another great and helpful video Charlie. I have an Alphameter and would not be without it now. You have also prodded my conscience into reviewing the snake pit that is my wiring! PS to hell with the keyboard warriors!
I’m so pleased that you enjoyed it TJ. Regards Charlie
Thanks for the link to the heat shrink tubing printer...which I found a day after buying the printer you linked after an earlier video!! #facepalm, lesson learned!
That’s life Dak Dak.
Once again Charlie I would like to thank you for sharing the hobby, more great ideals.
Thanks Dave, I’m so pleased that you found it interesting. Regards Charlie
It would have been nice to hear you say it was me who gave you the rail joiner tip, but hey at least its getting the tips out there for modellers to use and that is mainly what its all about.
Sorry Sam but in my defence there was someone else too. Regards Chalie
Charlie, you are a lifesaver - fitting fishplates (joiners) has been the most frustrating torture I have experienced since my eyes started playing up. What a simple idea. Tank you for featuring it today.
You’re most welcome David. Regards Charlie
Hi Charlie, I’ve been watching your channel for a relatively small time, but really enjoy your videos. I’ve just ventured back into the hobby after 40 or so years, but this time I’m building my layout in N Gauge, compared with OO from my childhood. I find it hard to believe that there are people out there that want to knock you, as I personally enjoy your presenting style and sense of humour. I think the fact that you leave in some of the mistakes makes things so much more enjoyable and that you can laugh at them, makes you very endearing. If it wasn’t for you I wouldn’t have discovered squires, or the RS wire stripper, your reviews / tests of various products always interests me and I totally value your opinion. Thank you for taking the time to present such informative material, keep up the great work..
Regards Derek
What a heartwarming comment Derek. Thank you so much, regards Charlie
Well done Charlie! The quality of your video content really sets you apart from the rest.
Thanks Leonard.
Thanks Charlie for taking the time to create these videos. Much appreciated.
You’re most welcome Trevor.
Charlie. Look forward to your videos each week. The fish plate tool is absolutely brilliant. Thanks for sharing with us 👍🏼
I’m so pleased that you enjoyed it Paul.
Tool Station have the Brother printer under £50. Great, informative video. Thanks.
I’m so pleased that you found it useful David. Regards Charlie
Charlie, After fitting 100's of fishplates the old way I am left with very sore fingers. Next time I will use your tip. many thanks for another great video.
Thanks Chris, I’m so pleased that you found it interesting. Regards Charlie
I have the DCCconcepts Alpha Panel with my NCE PowerCab and have been thinking of getting the Alpha Meter, so thank you for your thoughts and showing us the meter working.
I found it very useful and it does look good. Regards Charlie
Hi Charlie, although my layout is DCC I have never thought of measuring the current. Your programme this week has certainly set me thinking. Thanks for that. Throughly enjoyed it as usual.
Thanks Ken, I’m so pleased that you enjoyed it. Regards Charlie
Well the detail just gets better with every video. Honestly Charlie, the professionalism & detail you show & explain to us is fantastic. With the electronics, you don't give an in-depth lecture, but you show us what is basically going on & how it relates to the project you're dealing with. That would be enough to give a working knowledge which is exactly what is needed. I never feel daunted by the way you explain things & thoroughly enjoy the way you take us through the progress on Chadwick. Looking forward to seeing your next video. Stay safe & take care.
Thanks Simon, I'm now off to start this weeks episode.
Wish me luck.
Regards Charlie
Great tip for the fishplates :)
Thanks Stu
Hi Charlie,
What a great and enjoyable video it was last week. I am sure it was fun for everyone, me too. But not long after I finished whactng the vide I received very bad news. I have been awaiting this video to cheer me up.
Hope you are well Charlie,
Regards dan.
Hopefully this might take your mind of things Dan.
Quite right to explain "subscriptions". I'm the first to admit I wasn't subscribed to any channels until my daughter told me it was free! Sounds great to a Scottish dinosaur!!! ;-)
Brilliant tip on fitting fishplates too. I have never seen that before but I won't forget it now. Cheers. I do love the feeling of impending doom (Private Fraser) when you're about to switch stuff on despite your skill and the unlikelihood of it happening - ever the optimist! ;-)
I'm so pleased that you enjoyed it davie. Stay safe. Regards Charlie
Thanks so much for all your updates - always enjoy them! You're a fantastic asset to the modelling community.
Without wishing to be "that guy", one little nitpick just in case others bring it up - DCC *is* actually AC, as anything that crosses 0V into the negative cycle is an AC signal. It's just that DCC is a ~8Khz square wave ~16V, possibly asymmetrical AC signal which is of course nothing like 50Hz ~230V sinusoidal AC, which is of course UK mains voltage AC. It's a real nitpick though I fully admit - and absolutely bang on with everything else! A fantastic video as always, thank you.
Thanks for the correction Berry, it’s very welcome.
Greetings and Salutations from the colonies down under.
I really enjoy your videos. So many ideas and methods that I've learned from your channel.
The easier method of fitting fishplates is brilliant.Makes the fitting of N gauge so much frustrationless ( if that's a word)
That’s no real word David, but I’ll forgive you
Another interesting and informative video Charlie. I love the idea of the tool for fitting fish plates. What a simple but effective idea. I really look forward to Friday lunchtimes and sitting down with a cup of tea to watch your video. Thanks for a great channel.
Thanks Tony. I’m so pleased that you found it interesting. Regards Charlie
Wow, Apologies Charlie, only just seen this. The idea with the fishplates is pure genius !!!! Even more useful when people are working in N gauge !!!!! Great stuff !!!!
I’m so pleased that you found it useful Mark.
Another very useful and articulate article - thank you Charlie.
As almost an aside, but pertinent, the "DC"/"DCC" dyslexia, which most of us suffer from time to time, can be effectively minimized by using the simple, unconfusing, original terms, "Analog(ue)" and "Digital".
Yes John, you make a fair point. However, would that not confuse people are used to the other terms? Regards Charlie
@@ChadwickModelRailway Nay, nay and thrice nay! I'm not sure how clear reference to the two original terms, using very well-known words, that are so very distinctly different from each other, could produce anything but clarity and less confusion.
Vocally, "Analogue" and "Digital" slide off the tongue every bit as easily as "DC" and "DCC" so no disadvantage there. I suspect it's simply the laziness of people having to laboriously (😞) type or write such immensely long words that has led to this situation.
The poor over-worked people! 😀
Well done Charlie, I put a Circle of track on my loft floor the other day, I had forgotten how difficult it was to put the track together, and as for the fish plates a whole new thing, 50 years you just put Hornby track together so easy lol. The whole loft is now boarded out so one step closer.
I’m so pleased to hear that you’re getting there Barry. Regards Charlie
I just keep commenting about your shirt, nice clean one this time!
Wait until next week!
Great idea as for fishplates Charlie.
Thanks Roy
Cracking video Charlie. Love the fishplate tip. Loved the blooper with the points set wrong.
That’s my life all over Clive. Regards Charlie
Absolutely brilliant idea about the fishplates as I suffer from severe arthritis in my hands this will really help he also really wanted to know about the power readout unit thank you for this video from pete
Thanks Pete, I’m so pleased that you enjoyed it regards Charlie
I like your fishplate tool, cunning wee idea.
David McClelland I'm so pleased that you found the video useful.
Regards Charlie
Absolutely Brilliant why did i not see this Channel when I first started mine and my Wife's Layout in December i have watched all of them Now numerous times
I Now have 8 Sheets of 6x2 9 mm boards running round our Loft. I was just ripping up a 6x4 board to replace the track to create more gentler curves so my Class 42 and 37 can get round without de-railing whilst playing this video.
Love the Fishplate Fitting Tool absolutely Inspired no more shredded thumbs
Keep Up the Good Work
chris, I'm so pleased that you found the video useful.
Regards Charlie
Loved your comments on the word subscribe, reminded me of my wife a few years ago who told me she'd like to watch some videos but didn't want to pay to do it I had to explain that you don't pay to subscribe and she sensibly asked why the heck they call them subscribes then. A concise and unbiased review by the way more companies should use you to review their products especially woodland scenics lol.
Especially woodland scenics! Now you’re just being mean Richard. Regards Charlie
Stephen J.Price. A great piece of kit. Thanks for covering it on you’re channel.
I’m so pleased that you found it interesting. Regards Charlie.
Great video Charlie, particularly liked the wire labeling bit. Looking forward to the next one on the scenery 👍
That’s next week.
Hello Charlie, you are brilliant. The fish-plate tool has save my sanity. I am in the middle of building a new layout and your tool is going to be a great addition to my tool kit. I have watched most of you videos and they continue to be a great source of both information and inspiration. I am one of those modelers who have limited space so I am making the most of what I have by building a U shaped layout. Thanks you for the great videos.
What a heartwarming comment Peter. I’m so pleased that you enjoy my videos, regards Charlie
Damn! I saw one of those Brother printers (used) on Gumtree about 6 months ago for AUD$20 (about £11). It was complete in carry case with battery and tapes. I was toying with the idea of getting it, but didn’t. Had no idea they could print on heatshrink tubing. Kicking myself now!
It's a gem but an expensive one!
I love mine , Richard was kind enough to send me one out also doing a review on it 👍🏻 I too was surprised how little locos draw great video 👍🏻
Very cool, I'll await the sequel.
Chadwick Model Railway ive mounted mine quite crudely for now as I was having some problems all is explained in the video I’m hoping it can help others
Hello Charlie ! Fishplate tool = genius !! I'm making one immediately ! Thanks for the tip !
You’re most welcome mate. Regards Charlie
Hi Charlie, just managed to catch up on the last two excellent videos. I've now become a Patron as I realise the enormous amount of time and effort that you put into the videos. The standard of your presentation is always very high and I love the fact that you leave the little mistakes in. Keep up the good work.
Cheers.
Awesome, thank you Dave.
Simply watching your videos with easy style is great. Then add in about model railway getting better. Although my own layout is at the adding detail stage there is always a tip of two to pick up. Could not be better!
What a heartwarming comment Greg.
Hi Charlie, During lockdown I have been watching your videos & they have inspired me to have a go at a small DC layout with a Hornby Hogwarts loco that we already owned. Once finished I think I might have a go at a DCC layout after following your excellent channel.
That is awesome, go for it mate.
Hi Charlie, many thanks for a great video. You really do pour your heart into sharing this hobby with us. You're keeping me focused on getting my layout up and running too which is great! Many thanks again and looking forward to the next installment.
What a heart warming comment Edward. Stay safe. Regards Charlie
Watchin his again a third time ! It really is great watching someone so passionate about something and able to articulate it so well ! Could listen to Charlie all day long , might I suggest he is the next James may ? Both fantastic . One of the joys of lockdown ( and they are far and few between) really has been finding this channel 👌👌☺️☺️
Thanks Pjanic, That’s very kind of you to say so. Stay tuned, regards Charlie
A lot of great info in this video Charlie. Besides aging eyesight one of the other reasons for getting out of N scale was the fishplates jamming into my big fingers more often than not. Just got to be too painful. One could drill out a wood dowel and glue the longer end of your fishplate tool into it. Paint it a bright color and it will never get lost on the railroad. I am looking into the Alpha meter too. I probably will want to connect it with my programming track as well. I have some locos I have stored away. I have the Nano lubricants to tune those up with. I can see testing the amperage draw before tuning the loco and then testing afterwards with the Nano lubricants applied. I wonder if it will show a drop in the amperage draw? I will have to order the Alpha Meter from the UK. I have not found a dealer here in the U.S. for it. I also took a look at the Brother label makers for electric cable labeling. There are a few newer models that are smaller than yours that are for electric cable labeling. Models E105 and E110. I know I have the office version of one around the house somewhere. I read the comments by your followers about using the clear heat shrink. Now i wonder where that label maker got to.....
I’m so pleased that you enjoyed the video.
I’m sorry that the things I reviewed weren’t available in the US.
Stay safe, regards Charlie
G'Day Charlie
Matey thanks so much for the á meter review. This has been an item on my to do list that I just haven't gotten around to yet and I wasn't a 100% sure if I'd want one..........do now :D
The only small wee lil bug bear I have is I wish they made a flat black faced panel version as well. It would make the screen really pop out at you. Well I can always paint it I suppose.
Gibs Onethirty I'm so pleased that you found the video useful.
Regards Charlie
Well Charlie, I've seen other fishplates tools but yours is much easier to me, thanks. As far as the matter, we use them on t th e San Diego museum layout, and I too was very surprised at how little power draw is with dcc decoder draw we can have up to 20 to 30 or more running and never reach our capacity of the system. You make a great point for labeling the wires. Just love seeing your videos, and had some great laughs at last weeks out takes takes video and with CZcams videos are a great views....as always thanks for sharing....Jack 👍👍👍👍👍
Thanks (Jack), that’s very kind of you to say so. Charlie
#1 Absolutely Brilliant with putting on the fishplates.
I’m so pleased that you enjoyed it.
Hi Charlie, Always a pleasure to watch your videos, love the fishplate tool, Alpha Meter review and especially the self-deprecation. ;) Big Thumbs UP!
Thanks mate I’m so pleased that you found it useful. Regards Charlie
Thank you for yet another great video. I love the tip about the fish plate tool. Simplicity itself. I have acquired a set of the Boot lace ferrules and recently used them to rewire my Hi Fi system. Much better than just twisting wires. Looking forward to more videos.
I’m so pleased that you find the channel useful Michael.
Have been eyeing off these meters for a little while now. I think you've sold me one. Another great vid mate- Sean
I’m so pleased that you enjoyed it Sean.
Hi charlie, l am going to make a fish plate tool this morning. I mark or label cables using printed paper covered with clear heat shrink. Thanks for another great video. Sam
It’s a funny thing Sam, I have never heard of clear heat shrink. Regards Charlie
Hello Charlie, great tip on the fishplate tool. Also a nice, honest review for DCC concepts. See ya next time. Take care.
Glad you enjoyed it Norman.
Speaking as an electrician ,. Your wiring looks good & neat well done 👍
Thanks mate, I’m so pleased you approve. Regards Charlie
I wanted to add my 2 cents' worth (2 pence): I agree with the earlier comment about smiling when I get notified that you've made another video. I always find them interesting and helpful, and you are really quite good with your presentation--appropriately casual and friendly. How anyone can object is a complete mystery to me. Today's suggestion about a tool for installing fish plates had me going until I figured out what fish plates are--we Yanks call them rail joiners, but fish plates is a much more clever term. The tool is quite clever as well--I'll make one. I've damaged fingers and generally experienced frustration when installing fish plates, so the tool will help. Keep up the good work, and illegitimus non carborundum!
I’m so pleased that you enjoyed it James. Regards Charlie
What an excellent vid Charlie as usual! You've convinced me to get the alpha meter. It's good to see a manufacturer supplying a useful product for a genuine review. Stay safe Charlie
Honesty is always the best policy Chris with these devices. There are too many people around that just sing the praises for a freebie
@@ChadwickModelRailway quite right, but I do like the fact that you got to keep it, cheers 😎
As always very informative. Something to look forward to on a Friday! Love the 'Fish Plate Tool'. I going to have a crack at this over the weekend - Thanks again!
I’m so pleased that you found it interesting MM. Regards Charlie
Again Charlie very interesting.I am not shall we say electrically gifted but managed to put in a volt meter and an ammeter on each of the two cabs of my DC system.They never really worked well nor did they impart info in the manner I was hoping for.Well like a lot of people when I encountered DCC and sound I was hooked and although I can run DC I don’t.I mean why would you? my walk around NCE system is so much better.All that to say that this little product is just what I have been looking for on the dcc side.Thanks for bringing it to our attention.
Thanks Mark, I’m so pleased that you found it interesting. Regards Charlie
Nice vid.
I'd also like to see something about your test track setup.
It’s available from Ten Commandments and made by Zeller.
You are always so clear in your explanations, thank you for your time.👍
Thanks John, I’m so pleased that you found it interesting. Regards Charlie
Another great video. Your “tool” came just a few days late as my track crew struggled to put on rail joiners last Thursday night. However there’s always more track to lay and I will surprise them with your high tech design. I have found that filing the bottom of the rail approximately 45 degrees makes it easier to slide the joiner/fish plate on. This is particularly true when doing narrow gauge track and their tiny rail joiners. Thanks,Joe
Joe Valentine I'm so pleased that you found the video useful.
Regards Charlie
Hi Charlie yet again another informative and amusing video, love em. Regarding the fish-plate tool, as I am into N gauge you can imagine how difficult that is. Some while ago I saw this tool, very professional it was aswell but it was homemade, so I made a copy. I cut the plastic off a electrical connector leaving the two screws exposed and making it a lot smaller. I then placed this onto a short section of N gauge track. Tightening the screws when I got to the amount of fish-plate I wanted to slide onto the track. After the connector I bent the track and placed a nice handle that I got from Squires onto it. This tool for me at my age and eyesight is fantastic. I will show it on my site when I finally get around to laying track. So yes Charlie an excellent tip. Have to say I do like the idea of the Alpha Meter.
Regards Chris
I’m so pleased that you found the video interesting Chris.
Very interesting Charlie and a great tip for fish plates i'm going to try that it dose look like it saves a lot of fumbling around.thank you.
Tony Slight I'm so pleased that you found the video useful.
Regards Charlie
Hi Charle, another great video. I use a similar meter for DC to check current and voltage on locos before adding a DCC decoder. The alpha meter looks very interesting. Thanks for the tip on fishplate tool, so simple yet highly effective.
Thanks mate, I’m so pleased that you enjoyed it. Regards Charlie
Hi Charlie... The fishplate tool was exactly the item I was trying to explain in one of your earlier videos...you could also add an old wooden handle to the other end of the rail to make it even more comfortable to use. By the way the original fishplate tip/tool idea came from MODEL RAILWAY ENGINEER...Brill stuff as usual Charlie....Cheers
We share the love in this hobby Martin.
Thank you Charlie, as always, and as we've come to expect (you've set the bar very high mate) another excellent video. From Australia, I just wanted to share with you and for any of your viewers that use NCE DCC gear, that checking the current (AMPS) drawn is done by pressing PROG/ESC button 6 times, ENTER button once, then the number ONE button on the keypad. PROG/ESC button once will return you back to normal menu options.
Looking forward to more high quality videos. Thanks again.
Thanks Gavin, that’s a very interesting facility
Hi Charlie,
Just wanted to say a big thank you for your video last week. I found it really useful for my own channel. Had a bit of an understanding about it before but a couple of the points you raised I wasn’t aware of and as such found them really useful. Thank you sir and a big thumbs up from me! All the best and keep up the great work, Paul
Thanks Paul, I’m so pleased that you found it interesting. Regards Charlie
Hi Charlie, an excellent video again. I haven't heard of the fishplate tool before. It's so good because it not only makes fitting easier, it also has a big safety bonus in eliminating the slipping that results in damaged fingers. I'm making one!!
Really enjoyed the Power meter review too, your my number one model railway channel now. Looking forward to the next one.
All the very best, Phil
What a heart warming comment Phil. Stay safe. Regards Charlie
Hi Charlie, it's Charlie from across the pond here. Nice video, and a much nicer looking panel than the RRampMeter made here in the USA...
As you were measuring the loco on straight DC, and it didn't turn on till almost 6v, I couldn't help but wonder what kind of horrible mechanism it must have - as any *_decent_* HO loco should be moving at just a couple of volts, lol.
But looking closer at the RRampMeter pages I see they offer a battery connectable version for measurements below 7v - and elsewhere I see this unit is specified at 5v...
So this 5v is the turn on voltage for the meter electronics, and needs to be deducted from the readings when using it on a DC layout - and your loco was actually starting at less than 2v on the track.
Just thought I'd throw this out there, cause it seemed strange to me. Always enjoy your videos Charlie - have a great weekend!👍
Thanks mate, for some interesting observations. Regards, Charlie.
Thanks again Charlie. The fish plate tool is a brilliant idea. I think of all those times I have stuck fish plates into my fingers because it has resisted going onto the piece of track. I ended up using long nose pliers and a pair of forceps. This is so much simpler. I find an essential piece of equipment is Spencer Wells Artery forceps. They come in various lengths and in both straight and curved and have a pair of scissor handles. Because they lock while holding items, I find them really useful and use them in preference to reverse forceps.
Thanks Don, I’ll check out those forceps.
@@ChadwickModelRailway If you have a problem, Charlie, let me know and I will get a set and send them to you.
A link would be handy Don. Regards Charlie
@@ChadwickModelRailway Try Ebay. I use Elcon Forceps Spencer Wells curved, which are the most useful. You can get straight ones cheaper but I find the curved ones the best. Regards Don
Hi Charlie, I've been watching your channel for ages, but I only realised today that I hadn't subscribed. This is now rectified. The Alpha seems to be able to to measure in one polarity only, so presumably it can only see or measure half of the DCC waveform. In which case it would be fair to say the Alpha may indeed be correct and reliable, but only under 'no-fault' conditions. If one of the diodes in a decoder or track fed accessory was to fail, or even the master was to lose half the H bridge or a mosfet, and this fault was in the 'blind' side of the Alpha, it would appear that it could not detect this. The voltage would display as ok even though the system would not be working. It somewhat defeats the point of having one - at least having one you have to pay for.
Of course, if a fault occurred only in the side it could see, it would go blank, giving the false impression the track was dead. Oops.
I think I'd rather have a couple of coaches any day! especially as current metering is free with JMRI and DCC++. Keep shunting!
An interesting point. However, I must confess your electronics knowledge way outperforms mine. Charlie
Once again Friday lunch and your latest offering very useful again my wiring not as confident as yours but it works and looks neat and easy to follow do get good ideas from you and can’t wait till the next one keep up the good work.
Thanks Stephen, I’m so pleased that you found it interesting. Regards Charlie
Thanks for another great video. Based on this video, I have bought a DCC Concepts Alpha Meter.
I have gone down the road of using ESU command station, and DCC concepts points and signalling gear. I am also going to use point rodding with the DCC Concepts ss surface mount point motors. So far, very happy with what I have. I'll post a video once I have things set up.
That’s great news Peter, I’m so pleased things are coming on nicely. Regards Charlie
Hi Peter, Your ESU will also show you how much current your layout is taking.
Hi Charlie, recently subscribed to your channel. You have some awesome videos and Ideas. After many years of having the trains packed away, I'm building from the ground up and going DCC. One of the best parts of Model Railroading is the electronics and I too am a stickler for neat wiring and labeling. I recently took a 400 watt Computer power supply from an old computer and created a power supply for my layout that has 12 volts, 5 volts and 3.3 volt output. After watching this video, I wished that I had that machine, so I went out and bought a heat shrink label machine myself. Can't wait to get it and continue Have the whole layout to wire so it will be of great use.
What a heartwarming comment Brad.
Good luck with your venture.
Regards Charlie
Wow charlie this week has flown in !!!! Great to se u again , great episode lol ❤️❤️❤️😍😂😍
Thanks Pjanic.
Most interesting! The alpha meter was something I have always wonder why do you use such a thing. This was brilliant. Certainly like the fishplate idea and will have to try that myself. Wonder and insightful video Charlie! Clint
Thanks Clint, I’m so pleased that you found the video useful.
I used the ammeter on my NCE Powercab & always found it useful to know I was within the output of the unit...but I upgraded to a PowerPro & it does not have one. I have been thinking about an Alpha panel for a while but this is the first time I have seen it in use & I like the look of it.
I also agree with the comment below and cannot see why you would get a thumbs down, I think the work you do is excellent, I wonder how good the thumbs down people would get on with doing these videos
It's just something that I have to live with on YT.
That’s a Nice old British made controller (Hammant and Morgan) and I have a fixed output model which powered my AIRFIX scale model slot car racing……. When we used to make things here in England😇
Yes, David, happier times. Regards, Charlie.
Hi Charlie, great update.. really liked the review of the dccconcepts Alfa Meter. I’m going to have to invest in two of them to monitor my layouts power consumption. Until next time cheers
Thanks Jim I’m so pleased that you found it interesting. Regards Charlie
Wow perfect timing Charlie as I've just received my alpha meter today from DCC concepts. Great review so thanks for that and another good tip on fitting fishplates, bit of a tongue twisted that lol. I'll go and fit my alpha meter now. Andy
Great choice Andy and good luck.
Hi Charlie, Thanks for your informative summation of the Alpha unit. Whilst stationary locos fitted with a chip draw a small amount of current, so also will stall motors such as Tortoise and DCC Concepts digitaliP (and of course other digital powered accessories). This becomes an important factor in determining what level of power is to be supplied to a layout. I intend purchasing the Roco Z21 control unit which only supplies 3amps without a booster. Allowing for the odd 'older loco' which can draw up to 0.6+amps, plus several loco's sitting idle with up to 3/4 running at any one time, plus accessory decoders, the Alpha unit becomes a must. Otherwise the control units overload protection kicks in above 3amps and the entire layout shuts down. Thanks again for your well researched and informative videos. They are a great help to both the novice and experienced modeller alike. Richard
A fair point Richard. However, all my accessories are powered from a separate supply.
Et La Charlie, point against! thanks for the tips. I enjoyed this very much. Learned a lot from this.
Thanks Charles, you’re too kind regards Charlie
Good hat, good shorts, great legs :-) Another helpful and informative one Mr Bishop. I have 3 H&M Duettes, wouldn't be without them. Take care mate.
Three, priceless technology.
@@ChadwickModelRailway We grew up on Ford Cortinas mate. Do you remember when £500 was a 'real good'un' lol
The fishplate helper is a great idea - never seen it before.
I've not seen the heat shrink labels, I just use my Casio label printer and stick labels around the cable.
I'd better have a look into it.
Nice video as always Cheers!
Gerry if it works for you, so be it. Regards Charlie
Hi charlie
Another great video and yes for me it will be a must have to see at a glance what my layout could be doing.
Keep these great videos going.
And thank you for reading my question out last week.
Your friend and Faithfull subscriber.
Peter from Birmingham
Hi Peter, I’m so pleased that you enjoyed the video and the shout out. Regards Charlie
Thanks Charlie, certainly will look to make use of the product from DCC Concepts 😊
Paul Norval I'm so pleased that you found the video useful.
Regards Charlie
Very interesting data on the current load and I started to see the benefit...so I am thinking in my head has to be around £27-30; then when you mentioned £60 at the end I nearly fell off the chair...as we used to say downunder, for some products, DCCC do like to charge like a wounded bull...
Everything is always double what you'd expect!
Thanks Charlie for another interesting and informative video. That Alpha Meter certainly seems a useful bit of kit, yeah i can certainly see the benefit of having one on DCC. However, why, why, why in forty plus years of railway modelling have I never thought of using a bent piece of rail to attach fish plates, so obvious and so easy..
We’re as thick as each other Chris!
"Fish Plate" rail connector tool... file, ever so slightly one side of the "foot/rail base" so that it slides out a wee bit easier while the rail keeps hold of the plate/connector. Right, it's wonderful! John Canada
p.s. I pay respects to you because I cannot pay money. But, as far as "support" goes, please know that YOU and your videos support my passion. I'm working on turning my "model rail passion heart" over to get started again.
I’m so pleased that you draw inspiration from the channel regards Charlie
This is one of The Great Unwashed (lovely phrase Charlie) who is still using his 1955 Triang P5 controller. I would have been a Ludite had I been born at that time. I hate electrics - its the only thing that goes wrong on my railway. Liked the fishplate idea Charlie. Bit more trackwork on my N guage and I have fat fingers so thanks for that. Eager to see next week's.
Thanks Martin, you’re too kind.