Buying / Testing a Cheap Plasma Cutter on Amazon Tips & Tricks
Vložit
- čas přidán 11. 06. 2024
- I buy and review one of the cheapest plasma cutters I could find on Amazon, but I didn’t just go for the cheapest one available. I bought the cheapest one I could find with all the options and features I wanted.
In this video we will review this Bestarc BTC500DP 50 Amp pilot arc start plasma Torch. Yes, there’s a lot of plasma cutters available on Amazon and there’s lots of features lacking on some of those machines. This video will help you decide what features are best for you and help you understand how to cut with a plasma cutter and other helpful tips and tricks.
Hope you enjoy the video.
This is the Crossfire CNC plasma table from Langmuir systems.
Here’s an affiliate link to the Crossfire website if you are interested in checking out the table
store.langmuirsystems.com/?aff=16
Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on the table!
Here’s a paid affiliate link to Yeswelder website
YESWELDER LINK: yeswelder.com/?ref=s6nzvjxbwejy
SAVE 10% on your entire order! Use Promo code MIKEFESTIVA and it helps me out a little bit too 👍
You can find auto dim helmets here.
Amazon Paid Affiliate Links Below:
5 different Plasma cutter options below.
Use the Hynade Amazon Promo code 05MIKEWELD at checkout and save 5% on selected Hynade produces.
Bestarc is the one in this video.
Hynade CUT40 budget friendly 120 volt HF start plasma.
The Hynade CUT60DN CNC Blow back pilot arc plasma
with Plug and play connections for CNC tables.
Hynade 3-in-1 50 Amp Plasma, 200A TIG and 200A Stick Welder - Welder Combo, Dual Voltage, (can run optional TIG Amp pedal) (STC520D) amzn.to/3uNKgVq
Hynade 3-in-1 50 Amp Pilot Arc Plasma Cutter, 200A TIG and 200A Stick Welder Combo, Dual Voltage (can run optional TIG Amp pedal) (STC520DP) amzn.to/3J5gTmD
Hynade Optional TIG Pedal amzn.to/35APHOJ
**** Bestarc Pilot arc Plasma cutter **** amzn.to/36fgBvO
Plasma Cutting Torch Consumable Kit amzn.to/3y6oPjD
(If this machine is out of stock this link is the next best option)
Plasma Cutter Pilot Arc,120/240V Dual Voltage Non Touch Plasma amzn.to/3iyShLl
*** Here's a budget friendly 120 volt drag tip 35 amp plasma cutter ***
This little plasma cuts really well for a high frequency machine.
Hynade Plasma Cutter CUT40 HYC410 amzn.to/3qtA9DN
Hynade HYC410 Torch Consumables amzn.to/3594U9v
****Anyone looking to buy a Crossfire CNC table should look at this plasma cutter ****
Hynade CNC Blow Back Plasma Cutter, Machine, (CUT60DN) amzn.to/3D7k1wN
This Plasma has plug and play hookups on the back so it can be ran with a CNC table.
I have been running this exact Plasma with my CNC table and it works really well!
Flame Resistant Welding Sleeves amzn.to/307x9D0
Miller ML00895 Lpr-100 Respirator amzn.to/3yabsP6
YESWELDER Auto Darkening Welding Helmet amzn.to/3oAD78J
Shade 5 Plasma Glasses amzn.to/3y7oVaB
Here a link to my Crossfire Pro Video that you should check out if you haven't already. • The new Crossfire PRO ...
Here's a link to my Plasma 45 Review to check out. • Titanium plasma 45 pla... - Jak na to + styl
![Kei trucks 4x4 camping trip [spring car camping]](http://i.ytimg.com/vi/5j0CaOWKUVk/mqdefault.jpg)
5 different Plasma cutter options below. Amazon Paid Affiliate Links.
Bestarc is the one used in the video. amzn.to/3qxE4zx
Bestarc consumables Kit amzn.to/3y6oPjD
***Use the Hynade Amazon Promo code 05MIKEWELD at checkout and save 5% on selected Hynade produces.***
Hynade CUT40 budget friendly 120 volt HF start drag tip plasma.
HYC410 amzn.to/3qtA9DN
Hynade HYC410 Torch Consumables amzn.to/3594U9v
*Anyone looking to buy a Crossfire CNC table should look at this plasma cutter *
The Hynade CUT60DN CNC Blow back pilot arc plasma
with Plug and play connections for CNC tables. (CUT60DN) amzn.to/3D7k1wN
I have been running this exact Plasma with my CNC table and it works really well!
Hynade 3-in-1 50 Amp Plasma, 200A TIG and 200A Stick Welder - Welder Combo, Dual Voltage, (can run optional TIG Amp pedal) (STC520D) amzn.to/3uNKgVq
Hynade 3-in-1 50 Amp Pilot Arc Plasma Cutter, 200A TIG and 200A Stick Welder Combo, Dual Voltage (can run optional TIG Amp pedal) (STC520DP) amzn.to/3J5gTmD
Hynade Optional TIG Pedal amzn.to/35APHOJ
Mike, now that you’ve had the Bestarc for a while now, what’s your thoughts of it? Are you still liking it? Pros/Cons?
@@justinchelseypetz9559 I still really like it. I use it about 3 times a week and have made a lot of cuts since making this video and It’s still working great 👍
For the price it’s really well worth it!
Just received mine this evening!
I keep seeing "Out of stock"
@@TractorWrangler01 it’s in stock now
I really like how you explain the realities of the process and the equipment envolved. It’s not an advertisement but a learning experience. Thanks for the heads up on unknown stuff like this!
Thanks for checking out my video Greg, yes I wanted this video to be well rounded, covering features of plasma cutters, not just necessary this one, I wanted the views to take something away after watching this, so they can determine the best machine that fits there needs and understand how to better use it. Take care 🙂👍
I need more advice on plasma cutter which is the best that it will nt frustrate me in africa pls help me to buy one
Thank you very much . I know it takes lots of work to film , edit and get this to us. Much appreciated. Regards Gareth Wiltshire UK. Gratitude. Quality. Respect.
Thanks Gary for always checking out my videos! I really appreciate it 👍
Yes I think I have about 5 hours of video work and probably at least 12 hours editing trying to get the best info I could to make this. Take care buddy 🙂
@@Mikefestiva I recently bought an AMICO cut 60 HF Pilot Arc. It has the same torch head and I wanted to find some sort of drag cup for this machine so I wouldn't have to deal with the wire standoff. I was told by everybody that there is no drag cut for this machine and the nozzle is actually a drag head. The little recessed lines in the face should help but they seem too shallow. Do you have any suggestions of do you basically just use the machine as is? I love your builds and the quality of your work. By the way the cut 60 machine I bought didn't have any consumables besides the ones in the torch head.
Great vid again. I was going to get one but the asshats at Amazon already raised the price 10 bucks. Their wonderful algorithm automatically raises prices when sales go up. Took only 3 days so no telling what they'll end up being. Something about the 219 pricetag tempted me. I bought plasma cutter a while back at around the same price point and it lasted all of about a month, (parts unavailable of course) so its painful to spend more on another.
I was running at 110 and probably fried it as you described in the video.
I have been really happy with my Titanium 200 I purchased on via your review however. Thanks for a great channel Mike
@@RickRaulston Thanks for checking out my new video Rick 👍 I would hold off on buying one anyways till I get more time on it to see how well it holds up, like I say time will tell but like you mentioned, machines like the Titanium 200 have been great, that titanium of mine has been rock solid for the past 3 years now.
Take care Rick 🙂
Mike, yours are the best videos I've ever seen. First off you don't waste time with words and fanfare. You get right to the point and explain things perfectly like flowing water. Very educational, informative, and extremely time-saving for someone like me who is on a budget going through all of these pieces of equipment trying to sort out which one is the best value for me. I trust your judgment and your experience. I look for your videos first on anything that I am considering purchasing. Can't thank you enough for taking the time to publish your findings. You are helping a lot of people! Thanks again!
Mike read the comments from the “Engineer “ regarding China, I understand why he may say this, but I look at all your videos and see what you have made and designed yourself with no formal training and using inexpensive equipment and it blows my mind. I’ll take a guy like you any day over him. I may be able to buy high end tools, but for a hobbyist like my self it is stupid for a tool I may use once or twice a year. Keep up your wonderful videos they are much appreciated
Thanks for checking out my new video Chuck 👍 I understand the (Engineers) point he was trying to make and I even agreed that if someone has the money to pay $1700 on that tool then go right ahead, especially someone that is using it daily in the industry. But for a home hobby guy it’s hard to pay 8x more for a tool that does the same thing.
Thanks for commenting and supporting my channel Chuck 👍 I do really appreciate it 🙂
Outstanding review. Very clear and easy to understand for someone like me that does not have a plasma cutter
Mike, I greatly appreciate you and your content. I got one on order, just what I was looking for. It can get kinda daunting looking at all of the different choices available. Your knowledge is much appreciated. Well wishes from Wisconsin.
Awesome thanks Leonard!
You literally can't go wrong with these machines. I've got a Amazon plasma cutter. Used it 5 times. So far it's been great. Thanks for the tips!
Another great video. I have watched this several times and just sent the link to my buddy who is looking for a plasma cutter. Thanks again for taking the time to put together such useful content.
Thank you mike, I have Tig and arc welder in my home workshop along with a lathe/mill, band saw, belt sander, 2 x bench grinders and an air compressor along with about every other hand tool you can think of. My next purchase will be a plasma cutter of which I knew nothing about until I came across your channel. I consume way too many 41/2" cutter disk so looking forward to my plasma cutter. I live in the UK so 220v is the norm and I have heavy cable and 32 amp breakers going out there and a spare so all ready to go out there. Thank you very much for your instruction and long may your channel grow.
Mike, just want to say thanks. I’m a hobbyist welder. I was about to pull the trigger on a Yes plasma cutter for $400. You explained everything very clearly. It makes more sense to buy the Bestarc machine. I will be running the crap out of it like you said. Thanks!
Thank you. This was the most informational plasma video I've seen.
great find. Awesome video. Can't believe it cut the 1/2" as cleanly as it did.
Thanx for a great video Mike. I hesitated on ordering this unit and then it became unavailable so I looked into the alternate one you posted but waited 2 days before pressing the buy button and then it was gone too. Fortunately the BTC500 became available again so I jumped on it. Looking forward to trying it out. Thank you again for a great channel.
I was just literally looking on amazon for a cheap plasma that has the same features you were wanting too. I also had trouble sorting thru all the different models. Thought about my favorite channel here reviewing one and here it is. Looks like I'll be pulling the trigger and buying this one. Thanks for sharing Mike. Thanks also for getting me into fabrication.
Awesome to hear and thanks for watching 👍
Thanks for the review. Found you while researching plasma cutters. Been looking for over a year. I just tinker in my shop being retired. You have been a great help to an old timer with little knowledge.
Thank you so much for sharing your expertise and advice. I just purchased this unit, and am really excited to do my first plasma cutting when it arrives.
Thanks for the review. Super useful info. I have a Fourney 20P--too small for most things and pretty pricey. Consumables don't last and are kind of expensive. This solves a lot of the problems and complaints I've had with it.
Great format, production value and content. Not sure how your reviews could get better TBH. I just watched a bunch of "inexpensive plasma cutter" videos and this was by far the most useful one.
Right on thanks Rob
Mike, Excellent review! That is exactly what I’m looking for. Perfect for my overland trailer build. Think I’ll pull the trigger on this torch. No pun intended! Well done Sir! 👍🏼😎
I am as new as a newbie can get as far as welding, cutting, etc. and I would like to thank you for your videos. I have watched many and yours are among the best on here. I appreciate the time you have donated to helping people like me! Greatly appreciated 🍻
Mike as usual a great review! I have been looking for a second plasma cutter for some time, this has a great price and looks like it does a great job. Thank you
Thanks for checking out my new video👍 time will tell how this machine holds up so I will be pinning a comment from time to time on the how it’s doing. Take care 🙂👍
Mike,
I have to give you a big Thank You for taking the time to inform all of us!
I have looked at several different models as well, and I couldn't make a decision just because I didn't know what I can trust.
I will be waiting to see your later review before I buy, but I have to say that I am impressed so far.
Take care, and see you on the next video!
Thanks for checking out my new video 👍 yes definitely hold off till I get more hours in on this machine, I will make sure to mention how it’s holding up 👍
Take care Matt
@@Mikefestiva then I can test it also .. lol the cost of shipping from you to here in western NY and back to you plus insurance on shipping ,, it would be cheaper for me to buy one .. waiting on your 2nd review .. also when i run my air lines in my new shop going to add storage tanks in attic or near the ceiling they say water has trouble going up in the pipe so it should help keep my air dryer ?? just a thought .. what do you think ,, also will have drain lines down too the ground to catch any water .. a drop leg ,, like when doing gas lines for a home .. great video Mike ,, thank you
Thank you for the video. I have been down the rabbit hole of the Amazon search of the plasma torch search. The added search of consumables was also on my list of searching for the P-TORCH. Thanks again for the footwork and taking the time for the video.
I think you finally convince me on picking up a plasma cutter. The one thing that got my attention is on how easy it cuts through the thicker material.
Thank you for taking the time to show all the features of this and for doing all the research.
If I pull the trigger I will definitely do it from your site so you will get credit for the sale.
As always very happy with your video I'm already a subscriber for a very long time so the best I can do is to make sure to hit the like button and I definitely did that.
It appears that this BTC500DP is sold out currently and the only models available are non pilot arc cutters, so hold off on buying one until the pilot arc becomes available again. So far my plasma cutter is still cutting great 👍 I have cut about 260 inches and it’s still cutting great!
How much is this model on Amazon, since I can't find it
Excellent Information Thank You Mike.
I Absolutely Love ALL of your videos Brother. Simple and down to earth, 100% Natural.
I just got one yesterday they had a flash sale on Amazon and only paid 150. Can't wait to get my hands on it 😎
@@ernestovalentin6597 How the hell did you do that? I've been keeping an eye out since this vid and the Pilot Arc model still isn't shown
@@mlb6d9 got the notification thru the phone app, y had it on my cart, the crazy part is that I just checked it out now and it went up to 219.00 🤷♂️lucky me but it this on stock the same one on Mike's review
Thanks for being a test pilot. I was looking to upgrade from a non-pilot arc cut50 and was debating between a yeswelder cut55 and 65 because I don't trust Amazon reviews and have liked yeswelder stuff. This review gave me enough confidence to take a chance on saving the $120 and ordering this one.
Love your channel! I'm learning a lot about what I really need and what I don't . THANKS 😎
Great review Mike ! Looking forward to seeing you using this new machine in your upcoming videos.
Hello, Mike. I ordered the latest version of this machine today. With all of the options available, I liked this machine particularly for three reasons. Like you, I liked that the water separator was a part of the unit, but the gauges and adjustments for the pressures were on the front. I also liked that the gauge had the standard psi readings. But, the really big difference in this unit compared to the other highly rated pilot arc units was that the primary plug was the 220v plug. Even the Yeswelder units had a 110v primary plug and you had to use an adapter to connect to 220 volts. I don’t like that at all. In fact, I almost ordered another highly rated unit, but didn’t pull the trigger on it because this was such a big deal to me. It may not really mean that much, but I’m the type of guy that wants to use the right input voltages for every piece of equipment that I have. I also have an older MIG welder that can do both voltages, but it too, has the 220 volt primary plug. So, while I have a very heavy duty 220 volt extension cord (with 6 gauge wiring), I really try to connect these units directly to my 220 volt wall socket. I personally believe that in doing so, the life expectancy of the unit is prolonged and the day to day functionality remains at its peak. I’m very glad that you demonstrated just how easily this particular machine will cut up to 1/2 steel especially since there are always reviews that claim that it won’t cut the thicker metals very well. I think you demonstrated quite practically that it not only cut it, but cut it very cleanly, too. Thanks again for the video and I look forward to many productive days with my new plasma cutter. Also, I’ve subscribed to your channel and look forward to more of your videos in the future. 👍👍👍
Mike thanks for the video. This device would be perfect for me. I am starting out both welding and plasma cutting. The only downside to this unit is that the manufacturer stated no more non touch pilot arc which I desire. I like and the features of this one.
I don't mind paying more for that feature and your video is so new I had hoped this manufacturer would still have this feature. He stated they are out of that model even though the model number is the same.
Clearly he ran out after your video as many went to buy the exact model. I do see cut 50's everyplace but they don't have the the front air pressure control.
Again thanks and nice to find a machine like this for a small rancher like me.
I am looking for a plasma cutter and I am telling you that you are the most precise and interresting review that I saw .
Excellent video. Love the details about every feature, and you did it quickly and effiiciently with a well put together video. Top notch.
Thanks for the info. I’ve been looking for a cheap one for a while. As a weekend dabbler, the Titanium was just too expensive for the amount of use it would get. I was starting to just plan on using a cutoff wheel for everything.
Excellent video Mike! Wish it was there years ago when I purchased the cut 50! Had to cut some big stuff and ended up upgrading to Everlast 80a, works well. I like your thought pattern on what you are buying and why ... Cost, function, etc. Keep up the good videos! Looking forward to the next build video. BTW I don't like ruining consumables either.. added a homemade desscant dryer it helps a lot!
thanks Joel!
An informative review; some day I may add a plasma cutter for my barn shop. I especially liked your Do's and Don'ts and also your discussion of Personal Protective Equipment and what you use. Thanks!
Thanks again as always 🙏. You really help us folks with the selection process. We are all on a budget. And that machine will its features appears to be a good choice 👌.
Cheers 🍻, G.
Its 9pm on a friday and what a way to kick back and relax with my favourite youtuber MIKE FESTIVA 👌👌👌👌👌👌👌👌👌👌
Thank you!
I went with a 50 amp prime weld pilot arc machine. From what I hear their customer support is top notch if something does break. I am interested to see how both our machines hold up over time.
looking at that one, hows it holding up? any regrets?
You did an excellent job on this plasma cutter. I just purchased this machine a couple of weeks ago .have not used it yet. It came in while I was on vacation. Plan on running a 220 to my shed. Have 2 30amp 220 not using in my panel. Thanks so much since I'm a beginner on this and getting back into welding witch I did do in high-school. Retired now going full bore on home projects. You the man that's for sure. I already subscribed so keep pumping the videos. Looking at your welding videos next!
Really good video. Thanks for the time and effort you put into it. I feel more confident setting mine up now. Cheers!
Mike, the nice thing about a hand held plasma cutter is one can make cutting guides for repeat cuts. These, in your case, could be metal, or, with the tip protector, wood guides could probably work.
I've been using 1/8 inch hardboard to make cutting templates. Surprisingly, they stand up to lots of repetitive cuts. As long as the torch doesn't get hung up there's almost no burning. Mind you, that's with the tip actually dragging directly on the metal and against the template too. I suppose dragging on metal might be a bit harder on the tips and electrodes, but for that reason l picked a cutter with a PT31 torch. Those use the 100 piece consumable kits you can buy on Amazon. Additionally, the electrodes are double ended so you can flip them and keep going.
I ended up with a Lotos LTP5000D, after going through 2 of the "Cut 50" style machines with pilot arc that litter Amazon. First machine was DOA right out of the box, second one was a different "brand" that wouldn't cut 1/8" angle iron on max settings. I'll spend the extra on the Lotos consumables, this machine just works every time I turn it on. It lacks some of the features you listed on your criteria list, but my criteria was simply it needs to work correctly every time and it does.
Mike thank you I am learning about plasma cutters and your video was very informative for me, I really appreciated it.
An intersting and informative video; thank you. It's refreshing to find someone who does not automatically home in on the most expensive options and who takes a pragmatic view of the lower priced offerings.
Thanks for watching Derek 👍
Wow, Mike! Thank you for being so down to earth with your approach, your knowledge and skill, and for being so informative for us! I just subscribed and will be looking forward to learning from you
Thank you Frank
@@Mikefestiva Your welcome Mike, always enjoyable to thank those that truly deserve it
Really appreciate this vid. My yeswelder hasn't let me down based on your recommendation. Just got a bottle and I'm excited to get the tig set up.
Getting ready to pull the trigger on a langmuir table based on your recommendation so the timing is perfect on this video. Appreciate everything you do. Keep it up 👍
Thanks for checking out my new video! Keep in mind this plasma wouldn’t work on a CNC table, you will want to do some research on Langmuir’s website to see which blowback pilot arc plasma cutters are confirmed to work on there tables. Take care buddy 🙂👍
Thanks for your response. I am actually looking at YesWelder also. So wondering which everyone prefers. This one or Yeswelder.
I found the Everlast plasma cutters are nice because the consumers are relatively expensive and the quality is fantastic they are also quite an expensive compared to a Miller or Lincoln electric machines.👍
Your videos are top Notch. I watched this one and learned alot. I bought this model and it is my first purchase of a plasma cutter. Not new to using one just got tired of needing one and only have other means to cut steel with. Thanks again. I have the unit and it looks great. The extra consumable were a plus to from amazon I bought also
Hi mike, love the channel, wanted to let you know that we love the content and appreciate it even if it gets less views. Keep up your great work! Thank you for your high quality videos. From canada :)
Thanks for watching and supporting my channel Charles 🙂
Hello from the Pacific Northwest 👍
I use my 8750 predator generator for my 220 outlet if I need to use a welder. It also doubles as power for home. It works out pretty good. Plus it keeps generator ready when needed.
I do the same
I have been told plasma cutters don't like generators, what is the story on this, I was thinking of buying a cutter with a built in compressor to be more portable, seen one but the price has sky rocketed (may have to reevaluate!!), any thoughts anyone?.
@@CrusaderSports250 as long as your using a big enough generator I don't see why there'd be an issue.
Would you consider doing a video on air compressors as they relate to plasma cutters? What size works for hobby jobs, how to keep the air dry, those sorts of things? I'm new to plasma cutting and am starting to understand it, but the air piece is still a bit gray for me! Thanks again for all your efforts!
Very good review and thanks for educating me on terms and definitions. Been shopping for one, this is very helpful.
Every video on your channel is very well done. Thanks for all the work you put into each one.
Thanks Joe! I really appreciate it man 😊👍
Cuts look great for such an inexpensive machine. If it does crap out after the 30 day Amazon return window my only concern with these off brand machines is getting it repaired. My Hypertherm plasma stopped working after 2 yrs and 10 months and when I brought it in for repair I was happy to find it was still under full warranty. Good advice to try and beat it to death during those first 30 days.
I ran into the 30 day warranty on a item years ago 32 days it was a store near my home ,would not cover it , so a few days later I went back bought another item same one waited a week ,, returned the broken item they gave me a new one .. so I agree test the HELL out of it in the warranty time
Hey Mike, perfect timing! I am awaiting for my Yeswelder plasma cutter, great info for an old oxy/acetylene cutter!! Will leave a comment after I use it, great price I thought at $320!
Thanks for your time looking at cutters anything I see helps its great what you do thank you for what do
Thanks for review! This is going to be the next big purchase for the shop and this made it much more affordable!
As per my earlier comment, I did get the BTC500D ordered. The nonpilot arc. It showed up in 3 days and I paid 189 for the machine, 29 for a big pack of consumables, and $49 for a 4 year warranty. I put a new air filter dryer at my comp and dryer/regulator set to 75# on the cart the plasma is stored. So far I have cut around 12 linear foot of 3/16 hot roll plate as I'm boxing the frame on a ratrod build. Still on the first set of consumables and this thing cuts nice. The dross comes off easy and the cut is pretty clean. Me learning the right speed to pull it long distances has been the biggest issue. For 3/16 plate I'm running 24 amps and 50# of air. The book calls for 20 amps and 40 to 50 #. I thought it would be hard on my comp but in cutting 4 foot in one shot the 60 gal. comp only kicks on after about 42 inches. All in all I'm super impressed so far. Keep recommending super duper affordable tools like this one!
Great video Mike. One question: how much air do you need for plasma? Can you run a little pancake compressor (2 scfm) or do you need a big 11 scfm compressor. Thanks again for putting this together!
These machines tend to use less are then a blowback pilot arc start plasmas, I think you definitely could use plasma cutters like this on a pancake compressor for a fairly short 10” cut on 1/8” and stop to let the air build back up. One thing to consider though is you definitely need the compressor on a separate breaker if you are only running on 110 👍
Nice find. Looking forward to seeing how it holds up.
Just bought one based on your recommendations.Ordered 12/19-got it 12/21 !Thanks
I bought one of those Cut 40 machines a few years back. It was pretty inexpensive and actually works pretty good but it has a couple drawbacks. It's basically a scratch start meaning the nozzle has to touch to start (which does a job on the consumables) and finding replacment consumables and other things like the standoff you have on torch difficult or impossible to find.
Great video!!! I been wanting to learn how to weld (I bought all the tools and small HF welder). Anyway, I just finished a big project on the wife's car and realized that I can teach myself how to weld. You keep your videos very simple and very informative. Stay warm up there in the PNW. Happy New Year!!!
Awesome Milton
Thanks a lot for the video people like you make it so much easier for us diy home guys who have small projects and want to do it ourselves
Hey Mike, got this one in March when it got back in stock and used it for the first time tonight. Nice little machine - thanks for your detailed review and helpful hints!
I bought the Cut50 last year and no issues. Love it
Excellent video 🙂 I haven't done much welding or cutting for about 10 years. I had never heard of a "Stand Off" before this. That's fantastic 🙂 Next summer, I have a lot of metal work to do. A grinder just won't do... For me, Plasma is the way to go and this machine is a mind blower... A lot has improved since I last used one 🙂 Thanks so much...
This is the best review of this product I've seen. Thanks for all your effort and common sense approach.
Right on 👍 thanks for checking out my video and leaving me a great comment 😊
Love that you'll provide updates!
Just bought one from the link you provided based on your really thorough review. Also subscribed, well done bro!
Excellent review, very descriptive and entertaining. Last year I thought about getting a small plasma cutter and decided not to, now after watching this video I think I’m ready to get one, this one!
Thanks for checking out my new video 👍 I really like this plasma so far!
This plasma is currently out of stock.
Great job explaining the process and the 110 voltage explanation showed me why not to buy 110 only machine. Good teacher
By far Mike you are the Greatest Product Reviewer I've seen . Thanks to you for your attention to detail. Defined requirements, suggestions. Voice pitch, Good job.
Thanks 😊 I really appreciate it! 👍
I just recently bought this brand new from a pawn shop I got to cut the box open and was quite surprised at the price they had on this unit. I actually got mine for only $99 when I saw it I thought oh this can't be right and I so I was really happy to stumble across this video after watching one of your reviews on different flex core wires and non-flex core wires for wire feeds and I see this one. This was a great review I'm very thankful I purchased it and ran across your channel at the same time I will be subscribing and following this video to see your updates as they come. I'm hoping I can cut quarter panels off of cars etc and I think this is going to work out great for me. I definitely need to order the big box of consumables cuz I know I'm going to be going through them until I learned this machine better. Thanks for going through the setup and everything.
Because of this video, this machine is in my shop. It works perfectly. Thanks, Mike!
Right on 👍 I’m glad you are happy with your plasma cutter. Mine is still working great 😊
I have a Cut 40 and I remember the guy selling them from Arizona. People were taking advantage of his friendly return policy. Thanks for sharing the new plasma cutter.
Thanks Mike this was very helpful and I will be saving this video.
Great video. Like all your videos. Direct, vey informative, good closeups. Thanks.
Thanks for the information! Was looking at plasma cutters and I'm just a garage tinkering type guy. Thanks for your other videos as well.
Hi Mike !
Just drop-in you a line to say thanks for a great video on the plasma cutter ! And also have watched the mig welding video ( fantastic !) Very informative ! Thanks for taking the time to explain many important facts about said tools ! Look forward to watching more of your stuff !
Matt in UK. 👍
Thanks for watching Matt!
THANK YOU VERY INTERESTING, GOOD TIPS AND INFO!
I will be checking this video out periodically for the plasma cutter link. Thanks for the video it just what I’m looking for
Thank you so much for your video. I kept being distracted by that beautiful welding table. Very nice!
Great video.......great info......and i'm drawn to this product......probably because of your presentation.
I really like your style.....keep it up!!
Good video! Enjoy your easy to listen to manner and explanations. Have been thinking about a plasma machine, rather than using my old gas torch in my projects. :)
Glad you popped up on my feed. I have 220 in all 3 buildings on my property. Need a plasma cutter but Lincoln is just too expensive for my needs. This is good advice. Thanks.
Holy cow I can't believe the value in that little unit! Thanks for the review!!
I can’t believe how good that works for the money it’s incredibly good value, even as a hobbies or someone who mucks around doing stuff in the shed it well affordable. I’d be cutting stuff for the sake of it it looks a cool machine 👌 nice review dude thanks 👍
Thank you for your videos. I enjoy him very much. I really like it when you get technical. And you explain everything that a person needs to know. Thanks again, thank you.
Glad you like them!
Thanks mike very informative and easy to watch.
Good Video Mike ,I'm always learning from your Videos Thanks
Thank you very much for taking the time to do this.
I've been tearing my hair out with frustration (and buying more consumables than necessary) trying to get my head around plasma cutting.
You have no doubt saved me a small fortune in my learning curve.....
Hi from London !!
Glad it was helpful!
Very thorough review as always, thanks Mike! 👍👍🤘🏻🤘🏻
Really good review. Covered all the things someone getting started would need to know without getting into too much. Really well done, now subscribed to your channel and looking forward to going through your content!
Thanks for checking out my video👍
I think you will enjoy my channel a lot, thanks for subscribing 🙂
Really enjoy your videos Mike, I appreciate honesty on your reviews!, Happy Holidays to you and your Family
Same to you Mark and thanks for your comment!
Great find. Watching for the restock. I plan on gifting one to my welder friend.
Great Review. I’m really impressed with the Plasma Cutter. I guess it’s just seeing how long it will last now. Great Instructions. 👍
I 've wanted for years to use a plasma cutter and wire welder. You're now my go to guy from now on! Totally enjoyed and listened to every word.
Thanks Cliff
Great video, very informative, just looking to get started with a plasma cutter
I really like your videos, I am learning from them. Thanks
Right on 😊👍