Pre Program Settings | Minimotors EY3 Display | Blade GT | James Angelo TV | Vlog 127
Vložit
- čas přidán 28. 07. 2024
- Pre Program Minimotors EY3 Display
pre program settings is allowing the rider to minimize or maximize the performance of thier electric scooter..
first lets turn on the display:
p0 is wheel diameter = 11 inch you need to input the right wheel diameter inorder to get the exact speed record in display
P1 is the battery voltage protection you need to know what is your battery voltage for blade gt is 60 volts so in this you can into 72v if your scooter 72volts
P2 Motor poles
so in 11 inch blade gt motor hub the motor magnet is 30: this is important because the controller drives the motor phases at the correct frequencies for best perfomance
P3 speed signal direction:
do not adjust this default settings is 0
P4 SPEED units: 0 for km/h and 1 for mph
mostly in us and eropean countrt they are using mph
P5 start method: 0 is for acceleration start and then 1 is for kick start:
so in this if you are beginners i would suggest use kick start for safety purposes
P6 cruise control mode: 0 off and 1 is on
cruise control meaning is once you press the trigger in 3-5 seconds in constant speed it automatically moving ir spinning even you release your finger in throttle
P7 SLOW START: 0 is off 1,2,3,4,5 is the slow start: my settings in this is 0 because once you use 12345 it automatically regenerate the brake / this is for smooth rides
P8 max out: 5-100% in this my settings is 100% for maximum output power performance
9 battery save: 1 max save 2 middle save 3 no save
in this if you put 2 yur speed is only around 70-75kmph
so for better performance use 3 no save for high speed and high power
PA electronic brake strenght : 0 is off
5 is strong : in this my settings is 0
PB LCD BRIGHTNESS : 0 is back light off 5 is the brightest
PC auto off time settings: 5-30 mins diy depends on you how many mins you want to stay on your electric scooter even your not using
PD ABS SETTINGS 0 is off 1 is on
ABS means anti lock braking system is a safety anti skid braking system used on aircraft and onland vehicles such as cars , trucks and buses and electric scooter.
➡ Facebook / jamesangelo.caunca.5
➡ CZcams czcams.com/channels/qPe.html... - Jak na to + styl
Thanks u very much u are the best scooter Chanel bro !!
thanks bro appreciated 🤝🍻
Thank you so much wonderful James. You are great 👍👍😘
my pleasure bro🙏
Best guide if you have mini motors ey3 display. You have explained everything needed to be understood. Salute paps!
maraming salamat paps
Wonderful James thanks for all your educative videos. Please I want to tell you that I have also bought blade gt. Immediately I bought it I discovered that I can't fix the stand because the screwing mouth is washed. The seller is telling me that it is not a problem meaning that I can use blade gt without stand . Please can you advice me on that. Also the break vibrates and makes serious bad noise whenever you touch it
need to rethread the frame in order to attached the stand / in terms of brake issue you need to bleed the hydraulic brake because sometimes its less mineral oil inside
@@JamesAngeloTV wow bro, thanks so much. Please how can I rethread the frame. Kindly guide me if possible. Thanks for the great help
@@eyisijoseph need to buy threading toll or use much bigger screws or bolts to rethread
@@JamesAngeloTV thanks so much bro .
@@eyisijoseph wc bro
whats difference in minimotors controller and gt+ tft controller ?! both are 2x35A?
tft is good because you can use single motor and it has a option for 40A
Can you put a tft display on blade gt ?
yes bro but need to replace controller also
How do you reset the trip meter?
not possible bro the trip. it’s fixed
Hi Angelo , have you tried the ABS on?
yes i tried but it will feel not comfortable its like auto braking
@@JamesAngeloTV hoo I see! i Will try it , my Blade just arrived yesterday and working fine im very Happy. Regards thanks as always he he ,👍
Hi again Angelo , just one.more question¿ IS normal with ABS on too feel a quite Big vibration in the motor when i break ? Thanks
@juanguillermoariasescobar740 mine i turn of the abs
Please some people are having problem with controller. Can you resolve it. Thanks
what is the issue bro
@@JamesAngeloTV peut tu faire une vidéo sur le branchement des lumières sur le connecteur hub,car je n'arrive pas a résoudre mes problèmes, quand je mets la l éclairage de nuit,les clignotants ne fonctionne plus et les bandes led aussi.
@@legangdegaza bro please english
Instead of damao display they put EY3 minimotors..?🤔
Damao has 5 wires and EY3 has 6... What is the trick James. ?
in which wire bro the main wire or hall sensor wire?
@@JamesAngeloTV no no..
In display cable...
Damao has 5 wires
EY3 has 6 wires
Hi bro , hope I'm not disturbing you so much. Please pardon me. Please I just got blade gt 28A battery from LG . I experience a problem with battery drop. When I want to ride it the percentage is 84. After riding in gear 2 for ten minutes the battery will go to 44 percent. When I stop riding it goes back to seventy percent. L
Please can anyone help me with this issue
what is your display? did you check the voltage level if set to 60volts?
@@JamesAngeloTV the display is 61.4 now and battery is 70%
@@eyisijoseph i mean bro in settings did you check if you scooter was set to 60volts
what is your display
The voltage is set to 60 . Just as you advised