Easy Fix for No Spark on 150cc Xtreme Moped GY6 Engine
Vložit
- čas přidán 26. 06. 2019
- I tried everything under the moon and found out it was a darn kill switch causing no spark on my junk Chinese 150cc moped scooter.
I'm a noob when it comes to fixing mopeds, this was my first time fixing an electrical system in my life. If I could do it. You can too.
IF THIS DOESNT WORK DO THE FOLLOWING
REPLACE IGNITION COIL, SPARK PLUG, CDI.
IF THAT DOESNT WORK REPLACE STATOR
Enjoy this content?? Please like and subscribe! It helps me out BIG TIME 👍👍💪💪🍻🍻🍻
For those of you with spark issues, remember to start simple and go from there,,,,CDI,plug, ignition coil,,,these should be the first 3 to look at
Little brother...I just rewired for an 11 pole stator, even made a video about it. 1st 2 rides I was getting intermittent spark, she ran but would shutdown after about 4-5 miles or so. Pulling the spark plug and testing showed nothing. I was thinking it was the carb. mixture until I test the spark plug see I'm no spark. Of course check wiring, CDI, coil, tested everything...Came across your video and this other brother's who both confirmed the same thing. Didn't cut mine, but unseated it from the terminal, and now SPARK! Thank you nephew, I will be making a video in a couple of days and your name WILL be mentioned. Thank again! Oh for anyone else reading this...YES THIS WORKS. SUB #457
Same dude just replaced stator cdi ignition coil all spark related wires just to find out it is probably this
You touched on something no one else did
Nice video but still didn't solve my no spark issue
Same dude just replaced stator cdi ignition coil all spark related wires just to find out it is probably this
Had the same problem years ago. I shorted the kill switch to fix it.
Will it still cut out on ignition
I replaced piston and rings, she started then cut out because carbs was still filling up then I let her idle then she cut out and I checked fire coil in order but no power to fire coil
I replaced everything, still no spark. I will try this method as well
2 days of chasing wires and diagnosing this and that. I knew it couldn't be this simple. Pulled the wire out of the CDI pigtail, plugged it back in, and fired it up. You're the fucking man.
Appreciate that bro, I cut the wire and had spark again, literally saved me so much time and money, I'm going to run it to a toggle switch now and make everything nice and neat, thank you 👍🏼
Thx for the help man little videos like these make the differences 🔥🔥🔥🔥
This video has been copyright claimed by Valvoline and Seafoam. Thanks I will have to try this. I spent half the day trouble troubleshooting my scooter with test lights rewiring and soldering. I spent more time playing with the kill switch than I did installing the engine . Subscribed
Bought new Battery and CDI put them on still didn't spark waiting for new coil to be delivered and saw this video. Cut the wire and my keeway fact 50 is sparking again. Thanks so much, you're a legend.
Thank you, very much, you’re the man! I tried everything! It worked. Thank you thank you thank you!
THIS SAVED ME! thank you for this video!!!!
“And of course, Seafoam”. Love it!!
Thankyou 👍 most CDI have one 4 wire plug but mine has 2 plugs with 5 wires