How to Replace Fuel Tank Pressure Sensor 2000-06 GMC Yukon
Vložit
- čas přidán 4. 07. 2024
- Buy Now!
New Fuel Tank Pressure Sensor from 1AAuto.com 1aau.to/ib/1AEFF00018
The fuel tank pressure sensor feeds data about pressure inside the fuel tank to the EVAP system to determine if there are evaporative leaks in the system. A bad sensor will most likely trigger a check engine light for the EVAP system. This video shows you how to install a new fuel tank pressure sensor in your 2000-2006 GMC Yukon.
• Check here for more videos on the 2000-06 GMC Yukon: • GMC Yukon 2000-06 2nd Gen
This process should be similar on the following vehicles:
2000 GMC Yukon XL 1500
2001 GMC Yukon XL 1500
2002 GMC Yukon XL 1500
2003 GMC Yukon XL 1500
2004 GMC Yukon XL 1500
2005 GMC Yukon XL 1500
2006 GMC Yukon XL 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oarW/1AXAA00013
• Pocket Screwdriver
• 15mm Socket 1aau.to/oacd/1AXAA00015
• 8mm Socket 1aau.to/o4o/1AXAA00017
• Needle nose pliers 1aau.to/oov/1AXAA00051
• Needle nose pliers 1aau.to/oov/1AXAA00052
• 1/2 Inch Air Impact Gun 1aau.to/oQ/1AXAA00252
• Ratchet 1aau.to/oatQ/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oacd/1AXAA00015
• Torque Wrench 1aau.to/oxZ/1AXAA00044
• Floor Jack 1aau.to/owq/1AXAA00068
• Jack Stands 1aau.to/owE/1AXAA00065
• Pick 1aau.to/oi5/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
GMC Yukon 2000-06 2nd Gen: • GMC Yukon 2000-06 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I'll be doing this on a Tahoe, I might as well change the whole fuel pump.
You can also unscrew the bolts from the driver's side holding the bed on and only loosen on the passenger side then hinge the bed. A 2x4 cut to size will work great to hold it up. Imo this is easier than dropping the tank.
+jadedmc59601 We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ
since when does a yukon have a bed?
Will this work for a 2000 Cadillac escalade
not the home mechanic method
So you just pull off the connector, pry off the old sensor, put new one in, reattach the connector and your good?
Right?
Excellent video, very well done!!
What is the white connector mines corroded and I have zero fuel pressure
Is that an oem part?
I have the same code on my 2001 GMC Sierra 1500 sl W/4.8L V-8... When I bought it, on day 1 I had the code read and was recommended to get a new gas cap. I was told that that should solve the issue.... Bought a new cap and nothing changed whatsoever.... Now I have to run the hawg through D.E.Q. and that code is causing me to fail immediately... Not sure where to go from there?.... ANY ADVICE ANYONE??? Will I have to drop the fuel tank in my rig also? OR will this be accessible in my rig without having to drop the fuel tank?
On my base 1600 Siverado, I can reach over the frame rail & get to the sensor without taking anything else loose. Maybe I just got lucky... this time!
Did it correct the p0446 code
It’s reachable on a 1500 right
No doubt I just did mine ten minutes ago
@@fuckitol100 was it simple? Just put in and good to go?
With that part make the fuel gauge stop working
@@frankiejarrell no
Wow that's a lot of work! What would a job like that cost?
$715, if everything goes well. I just got an estimate today. $1,600 if things don’t go well - break fuel lines when they lower the tank. Lots of labor.
Try getting that bolt off the strap on a Chevy Express Van if the nut spins. There is zero access to it.
It would have been easier just to lift the bed up and slide it back a little bit
I have a 2002 Silverado with the 8100 vortec. The fuel pressure sensor is not on top of the fuel pump like in your video. Searched entire top of tank and there is no fuel pressure sensor that I can see. Do you have an idea of where else it might be???
Fuel tank pressure sensor
It's on top of the secondary tank under your spare tire. I had the same problem, discovered it after I cut an access hole in rear seat floorboard to get to the fuel pump and NO DANG SENSOR there.
You don’t have to drop the tank ….
I did it for 15 minutes.
I understand you have to charge per hour……
+stoycho hadzhiev We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ
Why does fuel gauge always show empty even after replacing assembly new?😂
You can skip like half of those steps aha 😅
Can you get to it from under rear seat ?
@@samadams5568 you tilt the bed
This is freaking me out. How expensive is a job like this to replace. It looks very hard.
@@ryssagreen5860 it’s easier than you think ! it just takes patience and the right tools.
@@snowblind187 what does that mean.....? " You tilt the Bed "..... ??