Water Tank Construction Process | Step by Step | Rebar Placement
Vložit
- čas přidán 24. 06. 2021
- #Construction #WaterTank #Animation
Hi i am Mahadi Hasan from "CAD TUTORIAL BD". Today i will show an Animation About Water Tank Construction process. this video is very helpful for All who want to learn about Construction Work.
Our Facebook Page - Cadtutorialb...
So watch, shear, learn & subscribe for more update....
/ @cadtutorialbd
(#Animation #Construction #Structural)
This was really helpful. Subbed!
A very nice program!m though I didn't see any plumbing
A nice presentation
Good educational video, I suggest it would be better if the corners are done the way we do corners for the Lift Shear Wall. Plus adding rebars at the corners.
few comments on this water tank structure,
1. NO drain sump area.
2. NO 150cm concrete exposure on the FGL.
3. NO chamfer on all sides on the concrete.
4. BITUMINOUS paint is required prior to backfilling.
5. Waterproofing Or Epoxy Tank Linking must apply insides the tank.
And also the inlet and outlet pipe
this is really amazing man
Thanks for your valuable comments
As UK builder evry aspect o Australia concrete tank construction is sensible AN useful for clients and needs of the builders and users
I am presently designing such a tank in AutoCAD. If you take each unique piece of rebar and create them as blocks you can then insert blocks of each type. The benefit of this approach is you can then use the DX or data extraction command to count the blocks and make a BOM table of each type of bar and how many will be needed in the project.
عمل رائع جداً
Super sir
❣️
So how long have you worked for the steel industry?
بالتوفيق ❤
👍👍👍👍👍
How you did slab without support under the slab
The bottom slab act as foundation and supported by soil. This is important to have check the actual bearing pressure and the soil pressure obtain from the tank;ie.dead load +live load and surcharge should not exceed actual bearing pressure of soil.
Nice demo, but you left out many important parts.
*Outlet pipes (cleaning and service) should have been fitted before pouring concrete to avoid cutting them when driving. That way, you avoid rust.
*There is no overflow pipe provided. Should have installed before concrete.
*There is no ventilation pipe installed
*Therevis no provision for electrical if installing an ellectic pump.
*The outside part of the wall should have added some tar or something to protect the wall from direct contact with the earth/soil/dirt
*Manhole to tiny for a human being to get to clean, fix any cracks, or install aftermath fixtures.
Good insight
Very good
Thanks for your valuable comments
Super 👌
Thank you
Isme plumbing work kaise hoga..
Please uske liye bhi ek video share kijiye..
Dasyat..
can you show how to calculate for the bottom bar slab and side wall bars?
Nice video! which program did you use to make this animation?
What's the length, width and The depth of the tank
Agra District R.C.C. Water Tank normal thickness all Side walls of Readymade 2000 Liter. Capacity water Tank in Complete Pieces is seen selling to Peoples Constructing their House.
Good
Trying to understand the need for the upper corner rebars purpose. Could someone explain to me please?
Me too need an explanation for that
This is just an educated guess but I think they are stiffeners that provide additional strength and stability by resisting lateral loads
What will be the cost of 1lakh lit under ground water tank of rcc.?
Heyy Keerthana
থ্যাঙ্ক ইউ
You are most welcome
3500 liters underground water tank ki labour kitni honi chahyey
Where is water stopper ? You didn't provide it
extension name for rebar ?
Paano po ang porma Niya
kivabe apply korbo sir bolen
i need sketup designeer this type desine
Sir which software u use for make this video?
Thanks for your Comments. I used SketchUP software for this video.
深坑
no sleeves?????
Please tellcosting
Cc layer mean
Cement Concrete Layer
Where's Water line?
Where is the bentonite strip?
Itne bars main to Ghar-bar bhik jayega 😅😅
স্যার আমি কি আপনার মোবাইল নাম্বারটা পেতে পারি
Ek ek bareek bar zoom karke batao kya kya hai aur kaise lagate hao
Unless that's a giant water tank or you want to store nuclear waste its a little over engineered...
Have BoQ
you have the boq?
I clicked on this thinking it was a Minecraft build lol
😂😂was it of any use?
Where is the water stop..?
You say step by step, but I didn't see any wall forms steps, water stops or bracing, sump pump area etc. This is a joke right?
can you send me this via pdf if possible
I need some help.
Can I contact you??
3500 liters underground water tank ki labour kitni honi chahyey