Video není dostupné.
Omlouváme se.
HONEYWELL Home T4 Pro | How to Use & PROGRAM | Follow Schedule & Setpoint | Thermostat
Vložit
- čas přidán 8. 01. 2023
- PART 2 of 2 - Covering TH4110U2005/U and all T4 T5 T6 Push botton thermostat devices. Part 1 will cover MANUAL Override, Restore DEFAULTS, Advanced SETUP Options and other tricks for easy operation.
+Stay tuned for more videos...every Tuesday & Friday!
+Further SUPPORT the channel by purchasing ANYTHING thru my Amazon links below:
Honeywell T4 Thermostat: amzn.to/3XbefTS
SUB & DONATE Here - / johnfranconh
FOLLOW - / contemporary_homestead
+ & HERE! - / contemporaryhomestead
Contact: JohnFrancoNH@gmail.com
Thank you to the following artist(s) - Music info/credits below:
CZcams Music Library
Franco, I just want to thank you so very very much. I got my thermostat running. I was almost in tears but you saved the day. If I have any other issues I know the man to look up. Thank you again.
You are my Honda snowblower whisperer. My T6 PRO was missing most of these advanced code numbers. I wanted to monitor and control my bathroom ceramic floor radiant heat at the slad ONLY. I ended up calling Honeywell and they went down the list of codes on MY T6. They changed a couple of settings..no 520 on mine. Now it has the set point above the larger current slab temp. It shows when you are heating and has a clock if you want it. It is perfect now. Thanks for the video..I didnt know it had advanced features till I saw your video.
I've had this thermostat for 2 years I hate it, it's so complicated. I just want to be able to program it to turn it on for when I want and turn it off at a certain time and not have to go through each day and temperature range to set it. I can't find the book . This video helped me get farther than I have gotten before so that helped out a little but I still hate it.
Installation instructions: digitalassets.resideo.com/damroot/Original/10015/33-00188EFS.pdf?rv=3dcd3b3ec88147a5b92a322f6da2a211&_gl=1*1r4g6r5*_gcl_au*MTQ3MjQzOTI3NS4xNzE2ODExNzk0
Be aware that "Adaptive Intelligent Recovery" mode (ISU #425 on our unit) will attempt to make room temperature arrive at the programmed temp at the time you set. In other words, it will turn the system on/off seemingly before it is supposed to. "Adaptive Intelligence" is turned on by factory default (setting- 1). To turn the feature off, program it to setting- 0.
So i was fiddling around with my thermostat and somehow managed to lock it. So first off, THANK YOU for providing the master code. Which i swear i true but apparently i missed that one... but i got back in because i wasn't confident i had set my schedule up right. But after watching your explination im confident i did it right so! THANK YOU again xD. Great information. Your pacing its perfect for me atleast. Easy go follow along if i wanted to. So you know... good job pacing is the hardest thing to hit. ^_^ ... oh and thanks again.. you saved me from getting yelled at by my mom... she's old and senile so it would have taken months for it to stop. >_>
Thank you for your videos. I seem to have this unit, but when I press “menu,” there is not a “program” option at all. It goes straight to time. Is there any way to fix this? Thank you!
I’m having the same issue!
Hit menu and + button to ISU.
Change 120 to “4” not “0” then when you hit menú it should show program
@@Catravels Thank you so much! This thermostat had me baffled, and you just saved me from having to chuck it and buy a new one.
tnks i check the first part yes But as a Honeywell Co why to get a Programable Tstat if we as Serv Techs are gonna disable it and use as a Normal T 1 Tstat
Any plans to bring the ATV content back? Still have the 850 & 1,000?
Yes i still have the 850 & 1000. ATV videos really dont do that great. And take alot of time to produce What would you like to see?
@@JohnFrancoNH Mostly just curious to see if you've done any additional mods, how they've been holding up and if any issues have come up. Recently picked up a 1,000 Ride Command and 570 both are around 20 hours now so still new - wondering if there's anything I need to keep an eye on besides the obvious fluid changes and inspecting the belt
Thank you!💝
How do I program the times and days of the week for the air conditioning to turn on and off?
Thanks for the video. It was very helpful. How do program auto change mode? i believe it is ISU 300. And do you need to select ISU 303 to use it. Thanks
Just set ISU 300 to 1 and auto will appear
I also followed your step by step and my desired 67 f has not changed the big number of 90f. I’m wondering how can I bring the big number down to 67. ?? 🤔 any suggestions?
It’s ok. It wasn’t the device. Found out there was a nail in one of the pipes. Issue was fixed over the weekend.
Thank you excellent.
I have spent probably 15-20 hours trying to set this thermostat and am still not confident
This stat will not re-start after a power failure. If you snowbird in FL during the winer, and no one is home,
you understand why this stat is not an option.
Je désire les explications en français .
Can I connect this T4 thermostat to my wifi
How can I change the pin lock
Installation instructions (includes advanced setup codes): digitalassets.resideo.com/damroot/Original/10015/33-00188EFS.pdf?rv=3dcd3b3ec88147a5b92a322f6da2a211&_gl=1*1r4g6r5*_gcl_au*MTQ3MjQzOTI3NS4xNzE2ODExNzk0
En français?