C'est beau de voir ces petites entreprises qui font du bon travaille, avec méthode. Des postes de travails toujours bien rangés. Et bravo pour le ou la cameraman.
I've seen such brushes on a farm, where the cows scratch their backs with them is very interesting to watch. But I think it can be used not only on the farm, but in many other places as well. Thanks for the interesting and informative video
“Only in Japan “ doing everything so perfectly! No matter if it’s just a brush or what. ご苦労様ですm(._.)m 日本ではものは長持ちするように作っている、ほかの所は次の日に又買いにくるように物を作っている。 だから私は日本製がすき✌️🤭✌️
Para el coche de rodillos .existen varias opciones en zonas de nieve ...una de ellas es uno que circula quitando la nieve entre rodillos ..y con cepillos de ese estilo pero en fuerte puede ser
🌟🌟🌟🌟🌟 Nice product, but why decreased the diameter. More diameter means more work will be done. Think about it please because I think so. May be I'm wrong. Better you Masters know.
@@SubramaniamLakshminarayanan The one you saw on the video is an industrial component and needs to fit standard bushings or bearings. It's going to be in operation more than 12 hours a day every day all year. The pipe you suggest will not work with the machines due to being weak in torque loading.
@@DirtyRobot You are right from your POV of pipes. There are however, special pipes with greater wall thicknesses and material composition that will serve the purpose better than solid shafts. One example of a pipe is the front fork tubes of a motorycle which is subject to stresses greater than what this brush would be subjected to. If a pipe can work well in a bike, I see no reason why it should not work here. The objective being reduction in sprung weight, easier handling and reduced cost of raw material.
As far as I can see here it's just a cold rolled bar where both ends god turned down, probably cheaper to do it this way then use tubing.. You would have to make both studs, weld them in and turn the OD again of the tubing to get rid of the welds.. Here they just take raw stock, cut it off, turn it both sides, done
C'est beau de voir ces petites entreprises qui font du bon travaille, avec méthode. Des postes de travails toujours bien rangés. Et bravo pour le ou la cameraman.
A by l
I've seen such brushes on a farm, where the cows scratch their backs with them is very interesting to watch.
But I think it can be used not only on the farm, but in many other places as well.
Thanks for the interesting and informative video
It performs the ahegao on cows.
やべぇチャンネル見つけちゃったよ…これやべぇよ
笑
ほんそれマジでやばい。仕事帰ってから仕事見てまうから休んだ気ならんわ。
🤣🤣🤣🤣
@@user-ve7vj9lv7e I1
Không thể tin được quy trình quá tỉ mỹ . Các thợ đã làm ra những sản phẩm tuyệt vời
That's one hell of a pipe cleaner.
The attention to detail is mind bending.
Very nice. Lathe is the ultimate machine.
Good video!!! so nice. i like this factory.
“Only in Japan “ doing everything so perfectly!
No matter if it’s just a brush or what.
ご苦労様ですm(._.)m
日本ではものは長持ちするように作っている、ほかの所は次の日に又買いにくるように物を作っている。
だから私は日本製がすき✌️🤭✌️
نعم صدقت
Маячня.
Máy móc thiết bị của Nhật Bản nhìn đã mắt. Họ làm một cách chuyên nghiệp 🇯🇵👍.
Wonderful pride put into this brush. 😃👍
Best of Best 👍
¡Gracias! Sigue así amigo! Desde México saludos
Thank you for watching!!
Vídeo muito bem detalhado dando total compreensão.
Parabéns!
Người Nhật làm chổi lăn rất tuyệt vời. Công nghệ sản xuất rất hiện đại 🇯🇵👍
This feels like watching Splatoon 🦑 weapons manufacturing in real life.
0:40 esa maquina luce aterradora
Muchas gracias! Спасибо!
プロセスX
👍👍👍
That job looks satisfying
Me recordó a ese capítulo de Los Simpson donde desbastan un árbol hasta convertirlo en un solo lápiz jajaja, que desperdicio de material.
Knocking off the weld spatters with a screwdriver.. respect.
Para el coche de rodillos .existen varias opciones en zonas de nieve ...una de ellas es uno que circula quitando la nieve entre rodillos ..y con cepillos de ese estilo pero en fuerte puede ser
Beautiful video 👍👍
Very good thanhs you ha noi viet nam
thanks
Vâng xin cám ơn nhiều nhé
Удивительно, как много людей задействовано.
🌟🌟🌟🌟🌟
Nice product, but why decreased the diameter. More diameter means more work will be done. Think about it please because I think so. May be I'm wrong. Better you Masters know.
جميل جدا 🌹👍
植えるんじゃなくて巻きつけるんだ！
Mantab
the overlayed music track is kinda annoying and unnecessary
لما تستعمل هذه الفرشاه ؟!
❤❤❤❤❤❤❤
뭐지뭐지하다 나도모르게 10분순삭이네
Made in BRASIL 🇧🇷
The land of many farts.
@@misterhat5823 your mother here always farts.
メイドインジャパン、ナンバーワン
Hà nội việt nam thanhs you
As a typical commentator, what is the name of the background music?
👍👍👍👍
👌🏻
インボイス制度によってこういう素晴らしい技術を持った、でも小さな会社がどれだけ潰されていくのか…日本の行末には不安しかない。
not fun to go under that knife. Can happen as easily as you like if you are tired and not 100% attentive.
lucky that it is "only" Chinese who do these jobs then
👍✨👍✨👍✨👍✨👍✨👍✨👍✨
왜 일본은 편한 히라가나 문자놔두고 한자 쓰는거야???
osha would not like this one lol
A solid steel shaft seems an overkill, a pipe with soild ends will do the job well, with a lesser sprung weight to handle.
I get the impression these brushes special and are not for street sweepers etc.
@@musicfind4020 Definitely not for street sweepers, but wherever they are used a solid steel shaft rather than a pipe is an overkill.
@@SubramaniamLakshminarayanan The one you saw on the video is an industrial component and needs to fit standard bushings or bearings. It's going to be in operation more than 12 hours a day every day all year.
The pipe you suggest will not work with the machines due to being weak in torque loading.
@@DirtyRobot You are right from your POV of pipes. There are however, special pipes with greater wall thicknesses and material composition that will serve the purpose better than solid shafts. One example of a pipe is the front fork tubes of a motorycle which is subject to stresses greater than what this brush would be subjected to. If a pipe can work well in a bike, I see no reason why it should not work here. The objective being reduction in sprung weight, easier handling and reduced cost of raw material.
As far as I can see here it's just a cold rolled bar where both ends god turned down, probably cheaper to do it this way then use tubing..
You would have to make both studs, weld them in and turn the OD again of the tubing to get rid of the welds..
Here they just take raw stock, cut it off, turn it both sides, done
That first cutter did not look OSHA approved
Yea those tiny welds aren't going to last long
어디에 쓰는 물건인고??
도로 청소할때 쓰나?
골프장에서 사용하나??