Make your Silverado sound like a corvette with the best exhaust system ever! Spintech 6000 mufflers

Sdílet
Vložit
  • čas přidán 18. 02. 2022
  • I built 3 custom exhaust on this truck until I decided this was the most gangster exhaust sound ever!
  • Auta a dopravní prostředky

Komentáře • 1,2K

  • @davidtomlinson8199
    @davidtomlinson8199 Před rokem +95

    “I want everyone to ride out and sound good”. A man for the people.

  • @donaldtriggs697
    @donaldtriggs697 Před 2 lety +553

    Literally the best sounding Silverado I've ever heard

    • @ccooper04
      @ccooper04 Před rokem +2

      What was the final cr you ended with on the build? I’m currently building a forged 408 with small dome pistons and shooting for 12.5:1 cr on the build.

    • @christian_007
      @christian_007 Před rokem

      Lol mf sound slow as fuck🤣😂

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem +11

      @@christian_007 only runs 10.9@123 on motor at 4,400lbs lol

    • @christian_007
      @christian_007 Před rokem

      @@NorthernPerformanceCars lol my accord will gab that the daily is my s10 i would drive out yo life🤣😂 both of mine probably running 9.50 over 160 mph😂 oh yeah both mine also weighs way lighter then youres too lol the accord weights around 2,800 ibs and the s10 weighs 2,500ibs with me in it the accord got 300 idh hp the s10 has around 600 ish hp😂🤣

    • @christian_007
      @christian_007 Před rokem

      @@NorthernPerformanceCars and yo ass getting gabbed by both🤣😂 and that truck is still only slow as fuck big guy😂🤣

  • @robertscottdunn
    @robertscottdunn Před rokem +215

    If I weren't seeing it on the screen, I wouldn't have believed it is a truck. That fast rev and crisp note is amazing. So nice.

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem +10

      Thanks man! I spent some time on it getting to where I wanted it for sure. It’s awesome

    • @christian_007
      @christian_007 Před rokem +1

      @@NorthernPerformanceCars aye are you trynna get gabbed by my accord and s10.....truck sounds like shit the best sounding vehicle period is a straight piped one 😂🤣

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem +9

      @@christian_007 haha sure. Let’s get it 😂

    • @christian_007
      @christian_007 Před rokem

      @@NorthernPerformanceCars lmao you don't want the smoke

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem +12

      @@christian_007 the only thing smoking is your straight piped wire out Honda 😂

  • @Stapleton42
    @Stapleton42 Před rokem +85

    Equal length everything is such a game changer and nobody even thinks about it. You're doing some big brain stuff here

    • @littledeel
      @littledeel Před rokem +1

      When you guys coming back to yellow belly. I’ll bring you guys some bad ass food

    • @ellisjackson3355
      @ellisjackson3355 Před rokem

      I love equal length

    • @mutombosays780
      @mutombosays780 Před rokem

      it's better anyways or sum...idk

  • @timpratt576
    @timpratt576 Před rokem +42

    Absolutely love the spintech mufflers. I’ve had several sets in different vehicles I’ve owned. That truck sounds amazing.

  • @rkd391
    @rkd391 Před rokem +11

    Sounds awesome!!! Love how crisp it sounds at higher RPM

  • @towerofresonance4877
    @towerofresonance4877 Před rokem +16

    It hit that perfect C5 note! Everything flawless! In my forty years on this planet I met just two other mechanics this skilled...in a small shop in Rhode Island. He built a "Vette-Jeep" from 1979. It was funny seeing a 404 police interceptor motor rev that high....with 0 leaks and perfect flow.

  • @joetheman357
    @joetheman357 Před rokem +21

    Ive always liked the side exit exhaust, in front of the rear tire myself. Truck sounds good, looks good, and goes like hell. I love it, nice job

  • @matthewhartsell4843
    @matthewhartsell4843 Před 2 lety +20

    That truck is awesome. I live in Oakland county MI and have been following this build since you mentioned "408" a while back. I'm just about to finish up my 408 on my 2009 Silverado. Cant wait to hear what it sounds like and makes for power.

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety +7

      I posted another video a while back.
      The new exhaust picked up 14rwhp.
      Putting us at 601 Rwhp

    • @matthewhartsell4843
      @matthewhartsell4843 Před 2 lety +2

      Ya I saw that. Very impressive how much that motor makes N/A.
      Thank you for posting all the videos and info on this. I haven't been able to find much on Silverado 408 builds as detailed as yours are.

  • @cali2468
    @cali2468 Před rokem +5

    Mufflex makes some good stuff. I ran their single 4" system on an F-body and it sounded amazing.

  • @chrishansen7004
    @chrishansen7004 Před 2 lety +35

    the exact sound ive been looking for on my truck, awesome rig!

  • @grindsman22
    @grindsman22 Před 2 lety +20

    Please make some more sound clips, it sounds just like an old NASCAR, definitely one of the best sounding V8 road vehicles that exist.

  • @mikepoint4717
    @mikepoint4717 Před rokem +8

    Now that’s a 8 cylinder symphony. Great great video . What a beautiful truck you did a magnificent job . Cheers

  • @natet1227
    @natet1227 Před 2 lety +6

    Spintech’s FTW!! Best sounding muffler out there and built strong.

  • @Chris-fl5lw
    @Chris-fl5lw Před 2 lety +13

    What a sound...makes me miss N/A days now that my cateye is turbo. I had full 3in into Spintech 6000 on my N/A LS fox and loved them..this cat eye sounds way better with the equal length

  • @juliobarraza1311
    @juliobarraza1311 Před rokem +4

    Wow that sound was off the charts! Good work

  • @gs1260cc
    @gs1260cc Před 2 lety +3

    spintechs sound really nice. I put them on my old school camaro build. Very happy.

  • @stoichiometry147
    @stoichiometry147 Před 2 lety +108

    Thank you for the video and doing the work.
    I’ve been stating for years that a damn near symmetrical (equal) length parallel pipes through a properly angled x-pipe can turn an LS’s exhaust note into the realms of supercar territory. Especially when using spintechs or going the Dr Gas route with mufflers.
    One thing that I’ve wanted to do is build this setup on whichever chassis with a cammed LS. Install a module mid pipe for the mufflers and weld up different style muffler to show a sound comparison.
    Reason; Since you have an exhaust with perfectly smooth (to my years) exhaust pulses, it’s a really good bench mark for how baffled, perforated tube, packed-perforated tube, etc mufflers sound. The chop you get from y-pipes due to timing collision of pulses ruins muffler comparisons.
    Same with poor quality X pipes that are total cross over. Based on my findings, 14-28degree bend on each pipe in opposition seems to sound/work best with a 35-45% pipe cut in.
    Anywho, rambling.
    Again, I very much appreciate this video and work. 👍🤙

    • @juicedmedia6623
      @juicedmedia6623 Před rokem +8

      Dr gas is an exceptional option for exhaust glad people still talk about them

    • @mitchellagate6036
      @mitchellagate6036 Před rokem +3

      @@juicedmedia6623 have they closed down completely i remember visiting the factory in utah when i was in usa over 10 year ago we purchased a container of oval tubing and shipped it back to australia

    • @juicedmedia6623
      @juicedmedia6623 Před rokem +2

      @@mitchellagate6036 there's still open I just got an xpipe from them like 2 months ago

  • @golf25radioman
    @golf25radioman Před rokem

    I have to admit that that is the best sounding exhaust I've heard. I'm jealous. I want one like it!

  • @hatedonalot9080
    @hatedonalot9080 Před 2 lety +2

    And now I know why you have so much control even while spinning. Driving on them icy roads makes one helluva driver

  • @Chase.bachler
    @Chase.bachler Před 2 lety +4

    Well I need to ship my truck to you now so I can get this exact exhaust built. This this sounds way gnarlier than my custom double x pipe corsa sport setup. Killer job man

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety +3

      Thanks man. It took me about 120 hours of tinkering to make this happen overtime. 3 tries.

  • @300blkaac
    @300blkaac Před 2 lety +10

    Best sounding truck on CZcams by far. Real nice single cab you have there man 👍🏻

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety +2

      Thank you Logan! I love this thing

    • @300blkaac
      @300blkaac Před 2 lety

      @@NorthernPerformanceCars Same here I fell hard for my 07 classic, it’s a 4wd I’ve been building with a pro touring style to it. Glad to see you’re still full weight and haven’t ruined one of the last few gems around

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety +1

      @@300blkaac for sure. Sometimes I wish It was lighter. But it’s truly too nice to start cutting down.

    • @300blkaac
      @300blkaac Před 2 lety

      @@NorthernPerformanceCars Yes it sure would be nice being lighter. Have you considered doing a purpose build race truck?

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety +1

      @@300blkaac I’m in the middle of this third gen drag car build. Once that is completed and I meet goals. I planned to get rid of that and do something different. Unsure yet.

  • @tedlachcik2607
    @tedlachcik2607 Před rokem

    The best sounding Silverado I ever heard of the best looking truck I ever seen to the owner of the truck excellent job

  • @clapfishSS
    @clapfishSS Před rokem

    I put spintech on my 05 GTO back in 2010 and it was a beautiful sound.

  • @jhawk1985
    @jhawk1985 Před rokem +5

    Damn I want my 2001 ext cab to be built similiar to the way this truck is. Yea I know my ext cab is heavy but its got plenty of room and its fun putn the gap on somebody who didnt expect it with a stock 5.3 and some bolt ons. Your truck is badazz man and sounds insane. It sounds like a built Z06 with high dollar exhaust

  • @viciousrap700
    @viciousrap700 Před rokem +12

    Spintech really does sound great. I left them and went to bullets on a true dual system I built for my 95 Z28, built a new system and put a new set of 3" Super Pro Street mufflers back on the car.
    The straight through mufflers might be worth a couple of more numbers on the dyno but the sound from Spintech is so unique I just love them!

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem +4

      I’m right there with you! In a single form I’ve had them soak up 35-40whp at 500whp.
      But with two of them they aren’t quite restrictive.
      The red truck they only take 15rwhp for the pair Vs taking them off.

    • @viciousrap700
      @viciousrap700 Před rokem +1

      @@NorthernPerformanceCars I know what you mean man. It might be interesting to see how much if any you'd gain by putting Dynomax Bullets or Magnapacks in place. 15rwhp is a bigger chunk than a lot of people think but for the unique sound on a street car /truck or S/S vehicle I'll still take the sound of Spintech unless I'm trying to get every bit that I can from a small engine like my 95 5.0 Cobra. I have a Magnapack cat back on that car but the way it sounds was also a part of the decision. I went from a Pypes M80 kit to the Magnaflow and love the Magnaflow.
      The resonator tips on the M80 kit make tyne idle sound "stuffy" the pop from the cam is really reduced and just sounds like a bit of rough thumping. I like a sharp exhaust note from the cam. Sorry, I went down a rabbit trail here. I love custom exhaust, i'd really like to start my own business doing specialty stuff for people like you've done with your truck. Of course a lot of people aren't willing to pay a premium price for an exhaust system as nice as what you've done here. They don't understand the man hours and labor it takes to do this kinda work. Great job brotha.

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem +3

      @@viciousrap700 absolutely. I’m with you there. I get a little extra and would definitely talk exhaust all day. I had a couple kooks bullet mufflers on here previously. Didn’t lose any power and actually made more torque by a marginal amount vs open headers.
      The dual 3” spintechs on this truck through tailpipes only lost 15rwhp out of the 601rwhp it previously made.
      But yes. My co worker Andrew has his black Silverado and it previously had a 4.8 with a single spintech 6,000 and did fairly well. We didn’t do any back to back Dyno stuff.
      Then we built a 11:1 383 for it with cnc heads and it under performed. So I popped the muffler off and it picked up neatly 40whp.
      So I ended up doing 2 pass through mufflers with an x pipe and at the same as mine. It made the same peak hp.

    • @viciousrap700
      @viciousrap700 Před rokem

      @@NorthernPerformanceCars sounds like you did a great job surf the 4.8 as well. I've never seen the testing but I've always heard the things you're saying about a single exhaust being said. That seems to be the nature of the chambered muffler design. I know that my car has the Super Pro Street mufflers and the Spintech X pipe coming off of a set of Kooks long tubes and I don't think at my power level the mufflers are taxing the engine enough to lose much power. My car is a 450rwhp car, maybe 460 with some really great tuning on E85...far cry from the 600+ that you're making but if I hit it with a 200 shot on the chassis dyno with and without mufflers I think that's where I'd see it.
      I could really easily make it so that I can put my bullets back on for track days but idk that I care about a few hundreths enough to do it. Honestly having a 6 speed car the ET could just as easily be my driving as much as a lack of power because I don't live on a race track and I definitely don't have myself glued in the car to be in tune with it enough to be really consistent.
      Yeah man, i'd love to talk anytime. Hit me back and we can exchange email here and then cell numbers through email. I'd never throw my cell number out right here, I don't think I'd get an overwhelming response from really hot girls as much as prank messages lol!

    • @trentdaddydolla647
      @trentdaddydolla647 Před rokem +1

      @@NorthernPerformanceCars these spintech mufflers take up that much HP?

  • @JD-pl4cv
    @JD-pl4cv Před rokem

    The revs….super cool.
    The second exhaust also sounded very good.

  • @Castro_C
    @Castro_C Před rokem

    This is real nice, definitely looking in to this set up for my 6.2 c10.

  • @SWFabrication.
    @SWFabrication. Před 2 lety +7

    MAN, that sounds incredible. Nicely done, especially on the fab work to build the exhaust. Perfect man perfect.

  • @GTOHawg
    @GTOHawg Před 2 lety +6

    Spintech owner for almost 15 years. It’s in my 2004 GTO with a LS3 418. Every time I get gas or do some driving I am always complemented. Still brings a smile to my face and I can’t find anything else that I like enough to change it. Love you truck man. Seriously badass

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety

      Hell yea. That’s awesome! Thanks man.

    • @trashbandit2449
      @trashbandit2449 Před 2 lety

      @@NorthernPerformanceCars what is the performance like on these spintechs? The design seems extremely restrictive.

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety

      @@trashbandit2449 when I had my ls1 in the red truck. It would go 114 in the 1/4 with the on.
      Unbolt them and the tailpipes and it would go 115.5.
      V banded in sections. Open headers Vs having 70lbs of muffler/tailpipe section.

    • @trashbandit2449
      @trashbandit2449 Před 2 lety

      @@NorthernPerformanceCars not bad at all. I'm convinced- sounds amazing

  • @Tealmoney8571
    @Tealmoney8571 Před rokem

    I know the video probably doesn't do it justice, but man that thang sounds good!! Great job on that exhaust!!

  • @chicagohooperj.a8392
    @chicagohooperj.a8392 Před rokem +1

    Hands down sounds amazing ….excellent work!!!!!

  • @MrHardtime21
    @MrHardtime21 Před 2 lety +3

    Sir..... You knocked that out of the park! It sounds truly astounding! 💪🏿💯👊🏿🍻

  • @michaelpeace716
    @michaelpeace716 Před rokem +4

    I love Spintech mufflers. Ran one on my F-150 from day one. Nothing high performance, just sounded good. About 300,000 miles out of the first aluminized 6000 series I had before she finally gave up and I had to replace it.

  • @billyhighfill
    @billyhighfill Před 3 měsíci +2

    You weren’t lying. Straight corvette sound!!! That’s cool!!!

  • @billyhighfill
    @billyhighfill Před 3 měsíci +1

    Dude. That sounds amazing. Literally amazing.

  • @umakemerandy3669
    @umakemerandy3669 Před 2 lety +6

    Makes a big difference at top RPM with the equal lengths, cool.

  • @bryanunion5110
    @bryanunion5110 Před rokem +6

    Loved the sound of spintech on my charger i just couldn’t help but feel like it was hurting power even more so than a flowmaster couldn’t see thru those mufflers at all. i switched to magnaflow at the time and it felt like i gained 30 hp but it didn’t sound near as good. running black widows now. they sound great but the best sound i ever had were spintech 9000s hands down.

    • @littledeel
      @littledeel Před rokem

      First I’ve ever heard of that. Usually it’s the other way around and spintechs pick up power.

    • @bryanunion5110
      @bryanunion5110 Před rokem

      @@littledeel how when you can’t see through them and the exhaust suppose to pass through tiny little holes in those spin traps? i guess i never dynoed but i could feel it

  • @robertjohnson4784
    @robertjohnson4784 Před rokem +2

    Hey brother sorry for the late reply just caught your video what a awesome build one of the baddest a** Silverado's out there thank you for this video plan on building 1 like yours awesome

  • @codystrom8708
    @codystrom8708 Před 10 měsíci +1

    Clicked on the video not expecting these results, sounds amazing!! If you closed your eyes you’d think it was a z06

  • @projectLSaudiA4
    @projectLSaudiA4 Před 2 lety +12

    Sounds very similar to 8-1 collector exhaust. The ideal sound!

  • @ripF5C
    @ripF5C Před rokem +6

    this is literally one of the nicest sounding vehicles I've ever heard. I can't even fucking imagine real life sound

  • @Lost10mm.
    @Lost10mm. Před rokem +2

    Absolutely amazing 👏 I wish I could make my old square body sound like that.

  • @cyrus7210
    @cyrus7210 Před rokem

    Snappy throttle response,high pitch wail up top, staccato idle with bass.....oh yeah that's one Badass sounding exhaust....

  • @1slow5point0
    @1slow5point0 Před rokem +7

    I had the 4” on my Camaro and it sounded great. If I ever pull the 10-series Flowmasters off my truck, I’m going with Spintech.

  • @kurtiscurtis8102
    @kurtiscurtis8102 Před 2 lety +13

    The best exhaust I ever heard was the 5th time I did my old 08 jeep srt ot had Billy Boat headers 3” all the way from headers back 3” X pipe but when I the mufflers was at the end of the truck with the tips welded on the muffler the only thing you could see is the tip but I’ve had many cars many trucks If the muffler is in front of the axle it’ll most always sound like a truck if the muffler is behind the axle it’ll sound way better more Vett like 👍🏽 have blessed day your awesome buddy

    • @crw3673
      @crw3673 Před 2 lety +4

      Very interesting theory 🤔

    • @Mr.Safety.
      @Mr.Safety. Před 2 lety

      @@crw3673 he's got a point, dumps before axle are louder

    • @trashbandit2449
      @trashbandit2449 Před 2 lety +1

      That's because of the affect mufflers have on an exhaust. The closer the muffler is to the header, the quieter and more toned it will be. Without a tailpipe after the muffler, it will be much louder and sound more wild

  • @ernestoalvarez2762
    @ernestoalvarez2762 Před 6 měsíci

    Awesome sound and great job building your dreams thank you for sharing 👍🏼

  • @tedlachcik2607
    @tedlachcik2607 Před rokem

    Absolutely the best sounding and the best looking Silverado I ever heard To the person that owns the truck excellent build

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem

      This is mine. The story on the truck is really cool. Long overdue father and son debate

  • @msk3905
    @msk3905 Před rokem +4

    Sounds great any thought to having tips come out rear qtr? That would looked nice and not have tailpipes hang down.

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem

      Of the box side?
      Absolutely not lol
      I like the tips out of the back. Wouldn’t hurt to be a touch smaller. In person at ride height it looks good.

  • @alexandercordova730
    @alexandercordova730 Před rokem +3

    What was it that you think made your exhaust sound the way it does, the equal length headers, or equal length exhaust? Truck sounds amazing and is exactly what ive been looking for

    • @MenofValueSpeaks
      @MenofValueSpeaks Před rokem +2

      The engine has a lot to do with it. A High compression ls2 6.0 vs a LQ9 6.0 with 317 heads, will sound different. The mufflers helps, but the higher compression engine will give this sound.

  • @OutlawChevy2
    @OutlawChevy2 Před rokem

    That sounds badass, the best truck I've ever heard!

  • @Tanner8585
    @Tanner8585 Před rokem

    This is exactly my dream!!! Thank you for figuring out the recipe!!

  • @stevewalsh1210
    @stevewalsh1210 Před 11 měsíci +3

    Sounds very nice indeed! Looks like it's fun to drive.
    I've been a Spintech fan since the foxbody days. They recently made me a custom pair of 9000's (slightly wider body to match the factory muff offset) for my Challenger, which I enjoy now.
    I ponder what your setup would sound and perform like with a pair of properly done 4-2-1 style headers... Not sure if you're familiar with Calvin Elston, he's very knowledgeable about ideal 4-2-1 design. Good posts from him on speed-talk forum (and other forums) over the years. If you're interested and have time, the discussions on design theory and r&d on 4-2-1 vs 4 into 1 and then more specifically on 4-2-1's optimal tube dia's and step lengths per the exhaust port size, HP and max RPM's are interesting and insightful imo.

    • @stevewalsh1210
      @stevewalsh1210 Před 11 měsíci

      This is a general idea of what 4-2-1 sounds like on a LS3 C6. I personally think the quality of the tone, in this example, would be improved with some slight muffling or at least anti-reversion chambers. Would love to hear it with a pair of 9000 or 6000's czcams.com/video/yKvi0-UiZ6Y/video.html

  • @dustinwalden7091
    @dustinwalden7091 Před rokem +4

    Makes a difference when you engineer an exhaust system instead of slapping random mufflers on there. Buddy got his 6.0 cammed and had a true dual system installed with bullets. Sounded like a machine gun. Was like dude that ain’t right.

    • @s2knott
      @s2knott Před rokem +2

      True duals always sound terrible and unbalanced.

    • @dustinwalden7091
      @dustinwalden7091 Před rokem

      @@s2knott he wound up with a muffler that had an internal x pipe that sounded the best. After about four different sets lol.

  • @tramirez3431
    @tramirez3431 Před rokem

    It sounds bad ass
    Never heard a truck sound like that.
    Great Job

  • @dwighttalton3737
    @dwighttalton3737 Před rokem +1

    Wow I didnt think it would sound like a vette but when you hit the gas amazing bro.I was in the market for a vette but now i might redo my chevy truck exhausts lmao. Nice work thanks for video

  • @C6Z_Bob
    @C6Z_Bob Před 2 lety +10

    Holy crap, that truck sounds insane! You're a genius! It's nice to see a content creator who's cares about the sound as much as I do.
    A friend of mine down here in Grand Rapids has a C5 with Kooks headers and X-pipe, he only revs it to 6600 but it sounds like it's revving way higher, one the best sounding LS engines I've ever heard. I wish I could make my F-body sound like that.
    I'm hoping over the next year or two I can put together an LS3 with a Cam Motion LLSR setup, TFS 255 heads and a Fast 102 with their mid length runners, rev it to the upper 7000s maybe 8000 rpm, and put it in a C5 with some Kooks headers and X-pipe with a set of 4.10 gears. If I can get this done I think it's going to be one of the most insane sounding cars ever. Hope my budget allows this to happen!

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety +6

      You can do it man! The truck has f body headers on it specifically.
      It’s super awesome!
      Focus on equal length and it’ll do it!
      This truck is a hydraulic roller with oem rocker arms. I spin it 7,850.

    • @C6Z_Bob
      @C6Z_Bob Před 2 lety +2

      @@NorthernPerformanceCars Wow that's a lot of RPM for a hydraulic setup, and part of the reason it sounds so damn good! What lifters are you running? What about valves? Hollow stem stainless or Titanium? I've been learning a lot on LS1Tech but most people are afraid to rev to 7000+ so there isn't a ton out there about higher revving engines.

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety +3

      @@C6Z_Bob I revved my 388ci Foxbody 9,000. Went high 6’s.
      It has Johnson st2126lsr.
      The truck has stainless valves.
      The Foxbody had titanium intake

    • @C6Z_Bob
      @C6Z_Bob Před 2 lety +1

      @@NorthernPerformanceCars Hey thanks for the info. I always like learning about different setups

    • @kthschsslr
      @kthschsslr Před 2 lety +2

      @@NorthernPerformanceCars what are the chance of doing a breakdown of a relatively inexpensive super-high rpm street car engine?

  • @thecitiots
    @thecitiots Před rokem +5

    This truck sounds amazing, if one was going to do a similar setup on 17 but with a crew cab how much would the longer pipe change the tone or is equal length the key?

    • @gabrielgalaxygh
      @gabrielgalaxygh Před rokem +5

      Equal length is key

    • @rayman1230
      @rayman1230 Před rokem +1

      Just a gee wiz for anyone looking for HP on N/A setups..
      Performance Automotive Engine Math by Jim McFarland
      Chapter 8 Page 91 Exhaust System Math

    • @RedJerk5
      @RedJerk5 Před rokem +1

      I’ve got an 18 and I’d love it to sound like this

  • @ChubsSir100
    @ChubsSir100 Před rokem

    I’m honestly really impressed I just got my blazer back but hate the way it sounds with the new motor might steal this set up lol

  • @yzmoto80
    @yzmoto80 Před rokem +1

    I feel bad for you my friend. I lived in a depressing frozen tundra for most of my life, and it is something I moved away from in 09’.
    Absolute best thing I ever did in my life. There is just something special about winter weather, WHEN ITS NEVER COLD. To each his own.
    That truck is amazing brother ! Sounds killer !!!

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před měsícem +1

      I’m with you! I was in Florida for 11 years on and off.
      But family brought me back to this cold hell 😂

    • @yzmoto80
      @yzmoto80 Před 27 dny

      @@NorthernPerformanceCars Well there you have it…you have to provide for, and be there for your family.
      That’s a man being a man ! Best wishes !

  • @cooperaldrige
    @cooperaldrige Před rokem +3

    i wish but i don't think my 4,8 will ever sound that good

  • @tombright2213
    @tombright2213 Před 2 lety +8

    That is the best sounding truck I've heard. I wonder what the 14-18 lt truck engine would sound like with this setup.

    • @jake_6.2
      @jake_6.2 Před 2 lety +1

      I want to do this, not sure if we have enough room tho 🥲

  • @moneyshotsfired
    @moneyshotsfired Před rokem

    Thank you man I really appreciate it . Truck sounds awesome

  • @jbj198840
    @jbj198840 Před 6 měsíci

    Best sounding pickup truck I’ve ever heard of any make or model ❤️❤️

  • @dannyflood3291
    @dannyflood3291 Před 2 lety +5

    Equal length is where it's at, I did an equal length on my stock '06 5.3 and it's very vetish with no mufflers and twin X pipes

    • @trashbandit2449
      @trashbandit2449 Před 2 lety +1

      How much of a difference vs 1 x pipe, if you ever had just one?

    • @dannyflood3291
      @dannyflood3291 Před 2 lety +1

      @@trashbandit2449 none as far as power or exhaust scavaging, but the sound is more tuned like a vette or performance track car.

    • @trashbandit2449
      @trashbandit2449 Před 2 lety +1

      @@dannyflood3291 that's what I was wondering. Weird how it doesn't really change the exhaust flow but changes the sound

    • @dannyflood3291
      @dannyflood3291 Před 2 lety +1

      @@trashbandit2449 the equal length really makes a difference at high rpm and the X pipe under the tailshaft of the trans is as close as you an get it to the manifolds or headers is where you notice the gains, the other X, I wasn't going to use mufflers so instead of just welding more pipe to connect all of that mandrel bent exhaust I had an inline X (the front one is a 90°X) so I threw it on and it made the best high rpm sounds

    • @trashbandit2449
      @trashbandit2449 Před 2 lety +1

      @@dannyflood3291 yes the first x is very important and it's placement. The second x I can't understand the purpose but it is very cool it makes a difference in exhaust note. I'll have to remember that

  • @erichaley6776
    @erichaley6776 Před rokem +6

    You should put a patent on this exhaust system. It sounds incredible

  • @cisnerosepy77
    @cisnerosepy77 Před rokem

    the best sounding silverado ❤🔥🔥🔥great work tnx for sharing!

  • @Wildicon19
    @Wildicon19 Před rokem

    Wow Nice sounding truck! It really rips!

  • @p_934
    @p_934 Před rokem +10

    So sick of you to share the info and help others out on getting this nasty sound. Great work.

  • @405ruben
    @405ruben Před rokem

    Just saw your video you posted of it on the RCSB page from doing burnouts on a cruise, SOUNDS AWESOME! It screams, one day I’ll copy this exact exhaust setup

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem +1

      Thing sounds sooo good! Videos barely do it justice.

    • @405ruben
      @405ruben Před rokem

      @@NorthernPerformanceCars do you think the spintechs are too loud for a daily driver? Currently have a Borla XS and a Vibrant resonator before it. No drone and quiet when cruising but I might want something a little louder when I get on it

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před rokem +1

      @@405ruben not at all. I am very pleased with them. No drone anywhere in the truck with the tailpipes the way they are etc. it’s loud. But it’s quieter doing down the road than most. Quieter than a straight piped stock 5.3 by a long ways.
      Even when I get pulled over for doing dumb stuff the cops never mention the exhaust being too loud and always compliment the sound.

  • @ozzynomicon2817
    @ozzynomicon2817 Před rokem

    Mine sounded like a corvette. My 07 nbs 5.3 with the lh6. I did log cabin shorty headers with hi-flo cats. True flow xpipe with dual in and out cherry bomb muffler that I reversed the position of it and then I dumped the 2 pipes in same spot. It was duals with an xpipe and dual in/out muffler. All 2.5 inch. Tigged. With 2 7x4 inch tips. Tuned out afm and put on density tune with no egr. I bought the stainless pipes and cut and bent them myself to what I needed. Will be doing my lml duramax here soon.

  • @freddymenchaca6133
    @freddymenchaca6133 Před 2 lety

    Bad ass sound brotha keep up the good work 💪

  • @justme6373
    @justme6373 Před rokem

    SICK AF !!!! YOU ROCKED IT !!!! Thanx for the video

  • @doble.s1922
    @doble.s1922 Před rokem +1

    holy shit I've never heard a truck sound like that before love it

  • @INFIDEL82AA
    @INFIDEL82AA Před rokem

    Holy SH*T, Brother! That is the best sound Ive ever heard! Vette or no Vette. I definitely think that youve accomplished your goal. And yes, it is pretty! Thank you for sharing that.

  • @imagri1
    @imagri1 Před 2 lety +1

    That sucker sounds wicked man. Fab work looks amazing too.

    • @NorthernPerformanceCars
      @NorthernPerformanceCars  Před 2 lety

      Thanks man! Had about 35 hours into it. Turned out great!

    • @imagri1
      @imagri1 Před 2 lety

      @@NorthernPerformanceCars you guys in Michigan?

  • @SupraHenry
    @SupraHenry Před rokem +1

    I’ve been looking for something like this! And this is exactly how I thought about doing it! Just dump after the axle because I don’t want to see the tip

  • @markkraus3598
    @markkraus3598 Před 2 měsíci

    Been using Spintech for years , Ron makes a great product !!

  • @genemounce8302
    @genemounce8302 Před rokem +1

    ....if I wasn't watching it with my own eyes, I'd never believe it ! fkn SICK bruh !

  • @BLMCFR
    @BLMCFR Před rokem

    I prefer sleepers. I have a 3/4 T 1975 truck with a 350 and 4 speed top load. I have dual 2 1/2 inch pipes with turbo mufflers. No crossover pipe yet. They give a good deep muffled rumble. When I get into the throttle, the engine is what that distinct growl. A lot of kids got embarrassed with their 4 and 6 cylinder cars, and some with V-8's. I calculate I have 350 to 375 HP. It was my every day driver so I didn't want to go too radical. It sure is nice to to have pulling the 9 ton 24 foot deck utility trailer with a load in the hills of Western Pa.
    The Spintech 6000 mufflers sound good!

  • @JDLCOLLECTIONS
    @JDLCOLLECTIONS Před rokem +2

    I NEED to do this to my 03 Tahoe! its a z71 so I go back and forth wether or not to lower it and do an awd swap, or do a slight lift and some 33s. This sounds amazing!

  • @rifleman7313
    @rifleman7313 Před rokem +1

    Great job. On my next build I want to use a basic 4.8L LS with 8 into 1 (I realize its extremely complecated especially for equal length pipe) headers going to a S475 (or maybe a slightly larger turbo). Turbo back exhaust with 4" or 5" exhaust pipe since alot of turbos what the most exhaust flow as possible. An outlaw or some sort of race muffler since turbochargers act like a pseudo muffler. And either Corvette style exhaust quad tips, or a pair of challenger dual rectangular exhaust tips. Looking for a mixture of Corvette sound and exotic European Supercar sound. I know that a 4.8L LS is a very small engine size/displacement. However if setup correctly with the right turbocharger and tuning its easily capable of 700HP-800+HP. See Richard Holdners CZcams videos.

  • @adamsongarage9933
    @adamsongarage9933 Před rokem

    that is definitely a gnarly sounding truck

  • @user-rw5iw4js8o
    @user-rw5iw4js8o Před rokem

    Thank you for making this video couldn't stand the sound of my truck or how most trucks sound. So i used your idea. I do have a 98 5.7 vortec stock internally just long tubes. Was skeptical id get anything clode to this sound i went with 2.5" and well i have a 5.7 vortec that almost sounds like a vette to. Going to be making a stainless system soon

  • @mattleonard5268
    @mattleonard5268 Před 2 lety

    I have a 3 inch spintech 9000 with a turndown on my 4.8 with bolt ons and I love the way it shrieks at high rpm

  • @Southrn_Maniacyago
    @Southrn_Maniacyago Před 9 měsíci

    I had 1/78 speed engineering headers into a 3in pipe all the way back with a X pipe in the middle. (No mufflers-cats) sounded straight badass

  • @jcastm310
    @jcastm310 Před rokem +1

    Earned my subscription that thing sounds awesome 👌

  • @antonio7815
    @antonio7815 Před rokem

    It sounds amazing, love it.

  • @DC4EVA
    @DC4EVA Před 10 měsíci

    Shot box single cabs have been it where i grew up since the 70's

  • @jamesyoder31
    @jamesyoder31 Před rokem

    Sounds like a beast! I love it..

  • @artisvarnado2515
    @artisvarnado2515 Před rokem

    Awesome awesome I have a 92 and I need that sound damn that truck sound good.

  • @crazyfoot490
    @crazyfoot490 Před rokem

    I got spintech on my 03 Avalanche. 5.3 JBA headers with spintech I've got the 9000. Sounds insane.✌❤😃

  • @dusterstilldustin
    @dusterstilldustin Před rokem +1

    I'm a Ford guy but DAMN that's badass dude! Keep up the good work!!! Wish I could get my 2.7 ecoboost to sound decent but I think that's a dream that I'll never achieve lol. I don't have the displacement 😔

    • @xmo552
      @xmo552 Před 8 měsíci

      Don't be ashamed of those 2.3 eco.
      I have a 1986 SVO with the old generation 2.3. The new ecoboost is actually a very great engine.

  • @marclutz2993
    @marclutz2993 Před 6 měsíci

    That is surprisingly amazing. Wow.😮

  • @paulsalmon4771
    @paulsalmon4771 Před 2 lety

    She idles so nice. Very nice truck

  • @joshwynn1836
    @joshwynn1836 Před 2 měsíci

    I built a similar true dual exhaust for my Trailblazer SS, 2 90's off the d/s to match the p/s, jogged up some w/2 Spintech Sportsman full size mufflers. It was drone free, but sounded good at idle, then when you put your foot in it, they screamed good noises!lol

  • @The221wyo
    @The221wyo Před 8 měsíci

    also the build quality of spintech is outstanding!!!

  • @69sound81
    @69sound81 Před 7 měsíci

    I like a little more of a deep grunt than a high pitched scream, but I've got to admit this sounds amazing.
    I'm looking to make ab exhaust system for my 3500 chevrolet Express with a 6.0. I'm thinking long tube headders, high flow performance cathalitic converters, X pipe, short mufflers and a side dump on each side just half way back.

  • @gjolinares23
    @gjolinares23 Před 10 měsíci

    I’m so happy this is a legit video and not a stock v8 truck with a blow master exhaust 😂
    Great work 👍

  • @yungchucktaylor
    @yungchucktaylor Před měsícem

    He’s still running the 60 trans nice! Now I wanna just build my trans turbo set up!