Y&H 2200W/3200W Hybrid Inverter Connection, Setup 01SUb Solar Priority Demonstration Teaching Video

Sdílet
Vložit
  • čas přidán 30. 07. 2023
  • This is a multi-function inverter charger, combining functions of inverter, solar charger, and battery charger to offer uninterruptible power support with portable size.Bulit in 80amp mppt controller, which integrates solar energy storage &means charging energy storage and AC sine wave output.It can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system, household power system, etc.
    Now we will demonstrate and explain the operation of this machine for you:
    1.How to connect the machine correctly:
    The first is to connect the battery. Note that the positive and negative poles of the battery cannot be connected with the positive and negative poles of the machine.
    Connect to AC input.
    Connect PV input.
    2. Turn on the inverter switch, turn on the AC input switch, and turn on the mains, and the LED will change from blinking to steady on.
    Turn on the PV input switch.
    Turn on the AC switch.
    In this way, insert the fan plug into the socket, and you can see that the fan is running normally.
    3. Next is to choose settings.
    Set 01SUb(PV Maximize Power Generation Setup), Setting 16 option, C50, Solar Priority Charging.
    Setting 12 option, battery low voltage to mains charging, When the battery voltage falls be;ow the set value(11.3V)
    Setting 13 option, battery high voltage to battery power, When the battery voltage is higher than the set value (13.5V)
    In this way, the sun is strong at noon, and the solar energy supplies power to the load.
    Note: The battery must be connected first, otherwise it cannot be started.
    When the sunlight is weak, the battery will assist the power supply.
    When the battery voltage is lower than the 11.3V we set, the battery will stop working, and the mains will automatically supply power and charge the battery.
    When the battery voltage reaches 13.5V, the utility power stops supplying power and switches to battery auxiliary power supply.
    4. BMS lithium battery communication
    If your battery BMS system is PACEEX.05 option set Lib. you can view the lithium battery voltage through the inverter LCD
    Settings are user-defined to connect a lithium iron phosphate battery
    Setting 05 option USE
    26 Option to set charging cutoff voltage 14.4V
    27 Option to set charging cutoff voltage 14.4V
    29 Option sets the stop discharge voltage 10.8V
    5. Next is the sequence of inverter terminal opening:
    Close the AC input
    Close PV input
    Turn off the AC output
    Turn off the power of the inverter
    Finally disconnect the battery
    If you want to know more about this inverter, you can click the link below to jump to the product page and download the instruction manual of this hybrid inverter
    Website:
    www.yonghuisolar.com/
    2200W inverter link: www.yonghuisolar.com/products...
    3200W inverter link: www.yonghuisolar.com/products...
    Facebook:
    / yonghuisolar
  • Jak na to + styl

Komentáře • 37

  • @fauxque5057
    @fauxque5057 Před rokem +2

    You're about the only one who actually uses ferrules on stranded wire. It's the right way to do it.

    • @yonghuisolar
      @yonghuisolar  Před rokem

      Thank you for your praise. Our technicians have more than ten years of work experience, and they are also able to do some small details.😁😁

  • @saintsaint8482
    @saintsaint8482 Před měsícem +1

    Can I use this Imverter with only solar panel with battery?

  • @mikepeck6633
    @mikepeck6633 Před měsícem

    Hi, just a few questions about the 2.2kVA(1800W) unit:
    1) What size/type of breakers would you use for 2.2kVA/12V/230V for UK use in camper setup i.e. AC IN/OUT, inverter to battery and PV?
    2) Can you use a metal (backing) base for mounting?
    3) When it says 55-450V for the solar(PV) voltage, does that mean Voc?
    4) What minimum Ah battery would be recommended?
    Many thanks - Mick

  • @adb8478
    @adb8478 Před 3 měsíci

    Hi. Could you please check if the inverter has USB (Utility first) as an available output source priority (parameter 01, in the manual only appear SUB and SBU)? Thanks!

  • @jamesjjs2
    @jamesjjs2 Před 10 měsíci

    I adapted two fan Noctua - nf-a6x25 flx in an inverter similar to it. I changed the position of the temperature sensor the right side to work. It was be great. Finished the loud noise.

    • @yonghuisolar
      @yonghuisolar  Před 10 měsíci +2

      Hello, yes, the sound of this kind of machine is a bit noisy when it is working, so we generally recommend that customers install it away from the bedroom.

  • @jaromirluzar2625
    @jaromirluzar2625 Před 4 měsíci

    hello everyone, I have an SP-3200 but I don't have an option in the settings [5] lib, I only have agm, fld, use, is there a way to set it to lithium batteries? possibly there is something like "firmware update" thanks

  • @Billie-solarproduct
    @Billie-solarproduct Před 8 měsíci

    Cool! and now a new portable solar panel is coming out, and it's Perfect for hiking, camping and garden. foldable and portable.

    • @rx_mattskii
      @rx_mattskii Před 4 měsíci

      Lol 😅 exactly what I thought too!

  • @captainpacific6796
    @captainpacific6796 Před 4 měsíci

    Option 26 and 27 are same(charging cutoff voltage)? In my manual option 26 bulk charging voltage and option 27 floating charge voltage. Are you sure options 26 and 27 could contain same settings 14.4V for lifepo4 battery?

  • @haroonharoon2315
    @haroonharoon2315 Před 3 měsíci

    Amazing ❤❤❤❤

  • @DavidSmith-qp7yk
    @DavidSmith-qp7yk Před 28 dny

    what are those cables called the one you use to connect the AC in an AC out? do they come with the unit when you buy them? Does the battery connection also come with the unit?

  • @MkatekoChestar
    @MkatekoChestar Před měsícem

    Sir Does the inverter run if u remove pv and Ac cables but plugged to the battery only can u able to run appliances?

  • @Tumbleweed5150
    @Tumbleweed5150 Před rokem +1

    I would advise folks to add a fast-breaking T-class fuse as close to the battery positive as possible. I was advised that 7" or nearer was best.

    • @yonghuisolar
      @yonghuisolar  Před rokem

      Yes, a circuit breaker must be used between the battery and the inverter.

  • @kamamahoe3248
    @kamamahoe3248 Před 5 měsíci

    Does anyone know what caused an error or fault code 10?

  • @seobotsengmoloi8767
    @seobotsengmoloi8767 Před 11 dny

    Can this inverter work without AC

  • @luigibetnunez4550
    @luigibetnunez4550 Před 2 měsíci

    Hola! Donde se puede conseguir piezas de repuesto?

  • @Tumbleweed5150
    @Tumbleweed5150 Před rokem

    Is this available in the USA, or if not, when do you folks plan on marketing it here. I have lots of off-grid friends who would LOVE the 12V version of this! Thanks.

    • @yonghuisolar
      @yonghuisolar  Před rokem

      Hello, we sell this in the US, you can place an order here, this one is shipped from the US
      www.yonghuisolar.com/products/y-h-2200w-solar-hybrid-inverter-max-pv-2000w-dc55-450v-input

    • @Scott-ig1zd
      @Scott-ig1zd Před 10 měsíci

      @@yonghuisolar 230v single phase is EU spec, your 2200w aio would be perfect at 120v single phase for small off grid cabin.

  • @herbertpalines4695
    @herbertpalines4695 Před 4 měsíci

    Hello! Will the inverter work even without a battery yet? I plan to tie it to the grid first since I don't have yet funds for the battery. Thank you!

  • @alejandrobetancourt339
    @alejandrobetancourt339 Před 4 měsíci

    Porqué el mío siempre tiene el bypass activo junto con el inversor

  • @reynold.lariza
    @reynold.lariza Před 11 měsíci

    this supports LFP batteries?

    • @yonghuisolar
      @yonghuisolar  Před 11 měsíci

      Hello, this is the battery type supported by this machine: Seal/AGM/Gel/Flooded/Lithium.

  • @rolf8384
    @rolf8384 Před 4 měsíci

    Hello Y&H, I can't say anything about the quality of the product and it may be ok, I myself ordered the version with 1500W but the operating instructions clearly stated that this inverter must be installed on concrete or masonry. Therefore it was unusable for me and I returned it. But that's exactly when it becomes clear who you're dealing with. Long story short: Apparently no return label could be printed and I had to pay in advance. I did it. Now, 4 months after Ebay's case was decided in my favor, despite photos of the receipt, shipping label and tracking number, Y&H has not refunded anything, Y&H is demanding the shipping costs back. Since it is normally sent to me via Paypal, this is possible. These are my experiences do with it what you like.

  • @BookPaLuy
    @BookPaLuy Před 9 měsíci

    can look system in apk ?

  • @user-ro5bv6er2t
    @user-ro5bv6er2t Před 9 měsíci

    Super maintenant comment installer appareil kp55k3-ss

  • @ViljarBauman
    @ViljarBauman Před 6 měsíci +2

    I would recommend avoid Y&H products at all. They are selling faulty products and don't provide any customer support.

  • @khomrattshop9575
    @khomrattshop9575 Před 9 měsíci

    Normally, if there is damage to your device How quickly can technicians analyze and solve problems for customers? *Refers to after-sale service

    • @yonghuisolar
      @yonghuisolar  Před 9 měsíci

      Hello, if the customer can provide accurate information, the cause of the failure can usually be determined quickly. However, if the cause of the failure is complex, it is necessary to simulate various possible failure situations.

    • @khomrattshop9575
      @khomrattshop9575 Před 9 měsíci

      If so We will experiment together... *** Don't care how long the trial lasts. Until the true cause is found After experimenting, success was found. and equipment that customers purchase and use Use it as a home decoration. Waiting for further treatment...indefinitely😊

  • @willierice7153
    @willierice7153 Před 4 měsíci

    Why isn’t my system reading my 4 100watt solar panels?

    • @alejandrobetancourt339
      @alejandrobetancourt339 Před 4 měsíci

      Tienes que ponerlos en serie el voltaje tiene que estar por encima de 40V

  • @totogazebac3654
    @totogazebac3654 Před 16 dny

    srne brand and deye is better

  • @garrydust1701
    @garrydust1701 Před 5 měsíci +2

    My 3200 unit lasted 5 weeks , it burnt out , tried and tried to have a solution , 10 emails later , just totally crap , I lost good money , this company is crap