Yeah but it was a good choice of him to put the V8 in the car. Sounds a million times better. I'm sorry but V6 mustangs are Camaros or challengers are not muscle cars and for the price of those cars you can just get the v8 version, gas mileage can be over 20 if you are not heavy footed.
@@guitarsandcars2586 when i got my 2011 3.7 convert, i most def could not afford the v8 counterpart and thats before insurance. I think most people who get the v6 understands the compromise
Very nice vid with the project car. I got two questions if you dont mind, how much does that lift cost and to maintain it? Lastly, how long did the restomod and swap take?
The lift was $3,500 super easy to maintain I’ve had no problems with it, and it took a couple years to save up and collect parts but once I actually did it I had it done in 3-4 days it went together like a Lego set lol
@@beaverbuilds5502 so I’m debating on doing this to my s550 v6 , I want it to be a journey forsure make sure to get all the parts . Did you switch over the motor mounts from the old gt to the v6 ? And also how difficult was the wiring? Did you take everything from the gt and basically swapped it ? Did you leave any parts from the v6 alone ? (Wiring wise ) like under the dash wires , or did you swap those also
how much would you estimate that it would cost me to do this myself? I want a coyote but dont want to spend as much as what the current market demands, have considered this project idea for a while, just questioning the funds. Thank you!
All depends on how good of a deal you can get a wrecked one for, I got mine for 4k and sold enough parts to pretty much break even, I ended up getting a lot of other aftermarket parts though
It has been my experience that 4.10 gears don't work that well with tremec transmissions that have extremely steep first gears, such as my old 2002 Mustang GT. In normal driving you are literally shifting into third gear before you make it across an intersection at a stoplight.
@beaverbuilds5502 I'm. I have everything plugged up but getting a security code car won't crank but everything works. Any suggestions would be greatly appreciated I haven't changed any wires in my bcm
Woahhh this was AWSOME like seriously how freaking cool I only wish I could build a little shop to work on my stang I want to gt500 swap it so bad but with the 5.8 to make 800hp so far I’ve got all upgraded suspension and wheels and tires as well as big brakes I’ve even pulled the rest end from a gt500 and that was built with 3:73s and mosier axles only had 2500 miles on it when he got rear ended but the guy sold the engine and trans before I found him otherwise u alr know I would’ve literally taken the whole guts out and put it into my little v6 dm me please I need the details about this @sandratha4.oh
This video hit the spot, this is ALMOST exactly how I want my future mustang to look
You did an amazing job brotha!! Would love to see more videos from you
Simply beautiful!
A job well done car looks good
great job guys.
Awesome work buddy looks good.
Que carrazo.. Quiero uno jeje
amazing vid i wanna do this with my 11 v6
Bro like what the heck?!?! That is so flipping nasty crazy🤟 you be scoopin!
You can’t tell that it was ever a v6 lees alone crashed one you did a great job bro
Hell yeah bro I love it
60th Sub 💪🏾 Good stuff!! Keep going brother
Good stuff👍
In the beginning it doesn’t sound bad for a v6
Yeah but it was a good choice of him to put the V8 in the car. Sounds a million times better. I'm sorry but V6 mustangs are Camaros or challengers are not muscle cars and for the price of those cars you can just get the v8 version, gas mileage can be over 20 if you are not heavy footed.
@@guitarsandcars2586 when i got my 2011 3.7 convert, i most def could not afford the v8 counterpart and thats before insurance. I think most people who get the v6 understands the compromise
fire
Awesome job guys!
7:10 damn that MK4 looks great
That’s dope bro I loved this vid ❤. 58th sub
Nice
This video is so underrated
Badass
Great video, and great build! One question, how did you get the 2014 premium cluster to work with the 2011?
this was a long time ago but were you able to use the mid exhaust pipes from the v6 or did you need to get a whole new system? was it the same size?
Price on the engine and trans if you don’t mind??? Where would you find one thats reliable?
Very cool the way it came out, I’m literally right next to you I’m in Fayette co.
Lol that’s awesome, I live right by Uk’s campus now. Do you ever go to cars and coffee?
@@beaverbuilds5502 not really cause I’m always working but would love to.
What and where did you get the paint for the calipers when you painted the 5.0 breaks
I hope you used the s500 enging it has a better bottom end if you plan on boosting it.
where did you get the fog lights in the grill? or were they factory?
Did you have to change the fuel pump or anything with the tank?
Nice build, what’s your career?
Did you change the engine and transmission too? about how much did you spend? What else did you change?
Hey man, I bought a Boss 302 and swapped it into my V6 mustang. It has no codes but keeps going into limp mode. Do you know what might be going on?
hey where did you get that grille???
You did yo shit on this car
She ❤❤ should go with need for speed build and do body kit on it would look fire 🔥
Very nice vid with the project car. I got two questions if you dont mind, how much does that lift cost and to maintain it? Lastly, how long did the restomod and swap take?
The lift was $3,500 super easy to maintain I’ve had no problems with it, and it took a couple years to save up and collect parts but once I actually did it I had it done in 3-4 days it went together like a Lego set lol
@@beaverbuilds5502 awesome built👌🏼 man sounds awesome to
@@beaverbuilds5502 so I’m debating on doing this to my s550 v6 , I want it to be a journey forsure make sure to get all the parts . Did you switch over the motor mounts from the old gt to the v6 ? And also how difficult was the wiring? Did you take everything from the gt and basically swapped it ? Did you leave any parts from the v6 alone ? (Wiring wise ) like under the dash wires , or did you swap those also
Insurance companies hate this trick.
looking to do this to my 2013 did u follow a forum or anything
Great build and hobby but i have to ask. How much more did you spend on buying 3 salvaged cars and repairs to make one car that runs?
2-3k on cars like that bc that coyote (1.0 and 2.0) has had time to be wrecked.
Did you have to change the whole wiring system are is it like building a foxbody with the coyote swapp
I had to change the ecu and the engine harness, I also had to modify the body harness a bit, overall was fairly easy
@@beaverbuilds5502 Thanks for your info
How did you make the 2014 cluster function in the car I have a cluster but the setting buttons don’t work
You have to wire in the 2014 premium mustang buttons, there are some forums on how to do it
how much would you estimate that it would cost me to do this myself? I want a coyote but dont want to spend as much as what the current market demands, have considered this project idea for a while, just questioning the funds. Thank you!
All depends on how good of a deal you can get a wrecked one for, I got mine for 4k and sold enough parts to pretty much break even, I ended up getting a lot of other aftermarket parts though
@@beaverbuilds5502 gotcha, thanks for the reply man
What kind of headlight housing are those?
I got them on eBay they are 2014 housings that work with the 2011 harnesses
I noticed the KY plates. where is jessamine county?
I’m about 20 minutes south of Lexington KY
It has been my experience that 4.10 gears don't work that well with tremec transmissions that have extremely steep first gears, such as my old 2002 Mustang GT. In normal driving you are literally shifting into third gear before you make it across an intersection at a stoplight.
They were okay on the v6 since it didn’t have a crazy amount of power but once the 5.0 was in I switched to 3.73
I like the hood you choose where is it from and do you have link or site that you can share… 💪🏽
www.americanmuscle.com/cervinis-stalkerII-hood-louvers-1012gtv6.html
It’s been on the car for a while, I love it
Thank you, Good luck with your channel 💪🏽
Where the 3.7 engine?? I’ll take it lol I can go crazy mod the one I have already 🤣
Was you able to use the v6 body wiring harness
Yes I was just had to switch a wire on the maf sensor
@beaverbuilds5502 is there a good forum that you used or did you figure all this out on your own. Great Job by the way.
@beaverbuilds5502 I'm. I have everything plugged up but getting a security code car won't crank but everything works. Any suggestions would be greatly appreciated I haven't changed any wires in my bcm
@lanecouch488 you need to send in the ecu to someone to have the PATS security system deleted
buying 3 cars to build 1?
idk but that seems kinda expensive - wouldnt it be cheaper just to sell the v6 and buy a 5.0?
Definitely a lot less time but this car is special to me and after I sold all the extra parts I’m in the car for 10k
Hershy
I have a 2011 v6 donate me the spare parts I’ll pay for shipping ✅
Have a 2010 and looking at doing this. You have a social media account I could dm you for a couple questions on?
Woahhh this was AWSOME like seriously how freaking cool I only wish I could build a little shop to work on my stang I want to gt500 swap it so bad but with the 5.8 to make 800hp so far I’ve got all upgraded suspension and wheels and tires as well as big brakes I’ve even pulled the rest end from a gt500 and that was built with 3:73s and mosier axles only had 2500 miles on it when he got rear ended but the guy sold the engine and trans before I found him otherwise u alr know I would’ve literally taken the whole guts out and put it into my little v6 dm me please I need the details about this @sandratha4.oh