Great job and great video. I'd been scratching my head trying to work out how various components worked and this video was a really clear explanation. Thanks!
lastima que no entendi nada (no se ingles) esta muy bueno el video, de igual manera se entiende lo complicado que es el mecanismo . lo bueno que esta esa mesa, dan ganas de hacerla...
Hi Greg, Thanks, the table was fun to build. Michael and Scott are one of the same. In the US I go by my first name Scott, in China I go by my middle name Michael. The Chinese have a hard time saying Scott. Sorry for the confusion. You can call me either.
Simplification is fantastic, you ve got rid of separate mechanism for center star in very elegant way. But I would suggest to put that lifting ramp in parallel with linear rails (like original fletcher table has), so you can easily do even more complicated skirt (which makes not round table round, for round2round table). This mechanism probably prevents it, beacuse skirt wouldnt be able to go too much down, so its upper static part which does not rotate would be probably very thin. But for this kind of table it is brilliant.
Thank you so much for your comment and suggestions. I must say I did look at and work on parallel ramps like the original fletcher capstan tables. But for my design I found that in such a short distance of travel the ramps to be to dramatically steep. Like you said I couldn't get the expanding and the skirt to work together any other way. You are one of the very few that understand what I have done, taking out the inherent problem of rising the star two levels in such a confined area. This star issue is where I was having most of my troubles. It took about a year, obviously on and off, it's just a hobby. Then slap my forehead, it just hit me. Few weeks later had a finished table. I built this table on a dare from a fellow engineer, as for my hobbies I view as my number 2 best build. My number 1 best build is my CNC router design and build. Check it out on my channel.
Greetings from Portugal, really amazing, if you could share accurate plans, some of us will be very happy,some to build, others for knowledge, again it´s beautiful
Muchas felicidades Scott, donde me puedo comunicar con usted, seria un gusto poder contar con los planos para tener mas conocimientos y poder realizar una mesa... gracias
Amir thanks for the comment, I got you email and will reply to it as well. What took the most time was trying different design, rising the star kept giving trouble. On and off took about a year, times I had to just walk away from it for awhile.
Are you kidding me "rock chalk", my word living here in China you don't hear that very often, matter of fact never. You must have noticed my hat. Thanks for my home state sound out.
Hi Michael, well done. I am looking for this table since two years. Especially how to build it by my own as diy. Would be happy to get a hint how to do so, ether by ordering a prepared set or in the worst case a pre assembled one. Hope to read you soon.
Kyle thank you so much it was a fun and very rewarding build, it took about a year. I have some very neat stuff coming up, please feel free to subscribe. I don't look to monetize off CZcams just share. Visit my channel.
Hello Michael , Greeting from Indonesia amazing , very impresisive and very interesting. I would like to be able to try to do it myself. is it possible to lead me to be given a drawing the component parts and their dimension ? or should I buy spare parts from you? I really appreciate your response. Thank You ; Baskara
I think it wouldn't be recommended to dance on the top of this table Because those metal sheet supports and those bearings may become wobbly at such case
Spectacular is the Only Word I can use to Describe this wonderful piece of Furniture! What Other Wood Finishes does it Come in? Where can I Buy, in Southern California 👍😇
Kirby, thank you so much for the great compliment. Unfortunately I have only built the one in the video. And at this time I have no plans to build another. There is a few manufacturers of these types of tables in the US. But I will warn you they are very expensive. Again thank you very much.
Hello Michael, Very impressive. Where would you recommend one gets the motors that get these tables to expand? I am on the lookout for them at the moment. Thank you
Hi Mr. Micheal, This looks amazing and very much impressed with this. Am looking for a table for 14 seators, could you please advise me how to send you the enquiry. Look forward for your reply.
Ramsey, thanks this kinda stuff is just hobby fun things. I don't offer kits or plans, I hope I gave enough info you can design and get working on your own.
No, he can't. This is a variety of the Fletcher Capstan table mechanism, which he has no legal right to commercialize. But you can easily find it now that you now the name.
@@calysagora3615 Not true. This is totally different mechanism, so he can commercialize if he wants. Also original patent for much simplier design from cca 1900 something is expired.
@@michaelgec3344 so the leafs fold over right? So if there's anything on the table that's grainy it could potentially scratch the finish right? I mean yeah you'd wipe them down before you fold it up. But it's just a thought.
Hi Mr.Michael really is very impressive to see your table, my sincere congratulations for your job !!! I can darwin Solidworks, when I see one video about this kind of table, the first thing I thought was to draw one. Do you sell the mechanism or the plans?
Hi Michael, if your asking how long did I work on this new design, I worked right at a year before I came up with this design. Remember this is a hobby, so it wasn't 8 hours a day 5-6 days a week. If I were to build another using this design, knowing the design I would estimate 15 - 20 hours. As for cost watch my update video, czcams.com/video/hbxqE7z0t-w/video.html
Robert, sure I could design a table that expands to eight foot, this is something I have been working on. But I don't have the space and resources to do that. I am a small hobby shop. My real life is getting product to the US. Please feel free to contact me at michael@gec-asia.com
Patricia, I don't offer this table to the market. Just built as a project. Tables like this are available but the are very expensive. Thanks for your interest.
Sorry, I have only built just the one in the video, I don't plan on building any more. I have been asked a number of times if I sell these tables, supply kits or if I have plans. At this time I don't offer any. But thank you for your interest.
@@michaelgec3344 understood, I saw your video about sourcing components, makes sense. Your design revisions make a lot of sense and seem to simplify this mechanism a lot. Going to try to make one of my own…
@@theamzngq Thank you, Thank you, Thank you, you are one of the few that understand not only the cost of a kit and that a set of plans pretty much useless. And thank you for recognizing the simplified design compared to other expanding table designs that have been around for a hundred years plus. I built this table because of a dare from a good friend of mine back in the States. I design product for a living here in China. The biggest problem with these tables is raising the Star two levels and all were doing it from the inside. After approx. a year of failed designs after failed designs, it's like a hammer hit me on the head, Michael you frickin idiot. One set of outer ramps and raise everything. "Simple" Good luck on your build and if I can be of any help please feel free to contact me.
@@michaelgec3344 Yes, I particularly like the genius behind having an "outside" and "inside" set of ramps. I plan on trying to make a larger table, so I'll need to figure out how to adjust the mechanism to make that work. Should be fun! I'm also going to start by building a scale model version using 3D printed parts to prove it out ahead of the full size build.
@@theamzngq The first table I built and designed and redesigned many times on to prove my design was a 4 foot to 5 foot table. I did most design in CAD, then physically prove the design using wood and patching crap together here and there. The table looked like a piece of swiss cheese. I work in Solidworks, I have most of the 3D models and I made most 2D prints for the parts I had fabricated, it you wish I have both 3 foot tabled and 4 foot table if your interested. The difference to go from a 3 foot table to a 4 foot table is minor, very little changes. All heights stay the same, the only thing that really changes, as for the mechanics is the arms and arm anchor plate. Can I ask where you are from? Me, I am an old Kansas farm boy. Just turned 60 and living my dream in Asia, southern China to be exact. If you wish me to send what I have in the way 3D models and 2D prints no problem, but there will be no type of plans or explanations, I just don't have time to put all that together. But no problem send to you via internet. No charge go through it save what you want, throw out the rest. I have had many comments and direct contact to my email on how the operation of the table. I may plan on doing a total in depth video. Your Thoughts should I do a total in depth. I don't mind giving my knowledge away.
Keshaw, I have been asked both for plans and people wanting to buy all the components. All the components got very expensive, then add shipping cost, duties just didn't seem logical. So I am thinking of putting together prints and bill of material for all the parts.
Nicholas, yes I still live in China, you must live in China yourself if your talking about a visit. If not it could be a very long time before we could visit. I live in Zhuhai, where do you live in China? my personal email is sales@gec-asia.com
Hi Do you have any design for round table with attached chairs with articulating arms for saving space. If you are interested please reply and I will provide you my contact info .
Jack, I have been asked both for plans and people wanting to buy all the components. All the components got very expensive, then add shipping cost, duties just didn't seem logical. So I am thinking of putting together prints and bill of material for all the parts.
@@michaelgec3344 Thanks for doing this for us. If you can sell the materials, especially the metal parts, for us to install, after making the wood parts on our own, I think that would be a win-win situation.
Great job and great video. I'd been scratching my head trying to work out how various components worked and this video was a really clear explanation. Thanks!
You are great person not only for the table but also for sharing knowledge,respct 4 you
Thanks
lastima que no entendi nada (no se ingles) esta muy bueno el video, de igual manera se entiende lo complicado que es el mecanismo . lo bueno que esta esa mesa, dan ganas de hacerla...
Thank you so much for sharing this with me
Hi Michael. This looks amazing - congratulations! Am just about to embark on Scott's design so very interested to see your plans at some point.
Hi Greg, Thanks, the table was fun to build. Michael and Scott are one of the same. In the US I go by my first name Scott, in China I go by my middle name Michael. The Chinese have a hard time saying Scott. Sorry for the confusion. You can call me either.
Simplification is fantastic, you ve got rid of separate mechanism for center star in very elegant way. But I would suggest to put that lifting ramp in parallel with linear rails (like original fletcher table has), so you can easily do even more complicated skirt (which makes not round table round, for round2round table). This mechanism probably prevents it, beacuse skirt wouldnt be able to go too much down, so its upper static part which does not rotate would be probably very thin. But for this kind of table it is brilliant.
Thank you so much for your comment and suggestions. I must say I did look at and work on parallel ramps like the original fletcher capstan tables. But for my design I found that in such a short distance of travel the ramps to be to dramatically steep. Like you said I couldn't get the expanding and the skirt to work together any other way.
You are one of the very few that understand what I have done, taking out the inherent problem of rising the star two levels in such a confined area. This star issue is where I was having most of my troubles. It took about a year, obviously on and off, it's just a hobby. Then slap my forehead, it just hit me. Few weeks later had a finished table.
I built this table on a dare from a fellow engineer, as for my hobbies I view as my number 2 best build. My number 1 best build is my CNC router design and build. Check it out on my channel.
Greetings from Portugal, really amazing, if you could share accurate plans, some of us will be very happy,some to build, others for knowledge, again it´s beautiful
Working on plans
This is a Fletcher Capstan table mechanism. And no, he's not allowed to commercialize this patented design.
Hi Michael, very impressive. I look forward to seeing the prints and Bill of Material as I too would like to make one
Getting started on putting all this together
Rock Chalk! Well done sir! 👍🏼
Thanks
I think you are a genius!
Well I don't know about that, I am pretty sure I am not a genius. Glad you enjoyed the video, thanks
Muchas felicidades Scott, donde me puedo comunicar con usted, seria un gusto poder contar con los planos para tener mas conocimientos y poder realizar una mesa... gracias
That lifting mechanism is genius!
Thank You MrSaemichlaus
Thank Fletcher & Capstan who invented it.
Wonderful design but you only gained a foot more in diameter. I suppose this design can be applied to make the table much larger in dia.
Amazing! Congratulations! 😮🤩👏
Great video, and beautiful end result!
Thanks Adam, it was a fun build.
Very impressive. Congratulations on this amazing work.
Torn thank you very much, was a fun build.
That design is simply genious :D
Thank you very much, was a fun build
Amazing!
very nice modification ....i believe it took time for proper and precise engineering.
Amir thanks for the comment, I got you email and will reply to it as well. What took the most time was trying different design, rising the star kept giving trouble. On and off took about a year, times I had to just walk away from it for awhile.
@@michaelgec3344 totally understandable, but at the end,you have it done and done perfectly
rock chalk! awesome table
Are you kidding me "rock chalk", my word living here in China you don't hear that very often, matter of fact never. You must have noticed my hat. Thanks for my home state sound out.
Outstanding idea & ingenious thinking! Just saw this today and I really liked it. Thanks for sharing!
Thank you David
Hi Michael, well done. I am looking for this table since two years. Especially how to build it by my own as diy. Would be happy to get a hint how to do so, ether by ordering a prepared set or in the worst case a pre assembled one. Hope to read you soon.
It's a Fletcher Capstan table mechanism. Now you can easily find it.
VERY NICE
Amazing!! Thank you!!
Your welcome, was a fun build.
Awesome
Amazing build!
Kyle thank you so much it was a fun and very rewarding build, it took about a year. I have some very neat stuff coming up, please feel free to subscribe. I don't look to monetize off CZcams just share. Visit my channel.
Can I have drawings. I would like to build for myself.
Delicate mechanisms..... Too many for 1/2 ft change... will be good for larger sizes.
Star at the bottom ....🙂
Огромное спасибо)
Hello Michael ,
Greeting from Indonesia
amazing , very impresisive and very interesting.
I would like to be able to try to do it myself.
is it possible to lead me to be given a drawing the component parts and their dimension ?
or should I buy spare parts from you?
I really appreciate your response.
Thank You ;
Baskara
I can send basic prints on the 3' design, but please watch update video
czcams.com/video/hbxqE7z0t-w/video.html
Hello, My name is Oswaldo from Ecuador, I like your table and I'm interesting in your product expendible table, how can expoxt to Ecuador? Thanks
Gonzalo thanks for your interest. I don't offer this as a product
I think it wouldn't be recommended to dance on the top of this table
Because those metal sheet supports and those bearings may become wobbly at such case
Spectacular is the Only Word I can use to Describe this wonderful piece of Furniture!
What Other Wood Finishes does it Come in? Where can I Buy, in Southern California 👍😇
Kirby, thank you so much for the great compliment. Unfortunately I have only built the one in the video. And at this time I have no plans to build another. There is a few manufacturers of these types of tables in the US. But I will warn you they are very expensive. Again thank you very much.
@@michaelgec3344 yes I've Seen the The One that's $50,000, But the Ones I've Seen Priced around $3,500 is More in my Budget
Boa noite, moro no Brasil … como posso adquirir uma mesa com 1,50m reduzindo para 1,10?
Sorry I don't make and sell these tables. Just built the one table.
can you share all the dimension i want to make one
puedes decirme en donde puedo comprar las piezas que lleva. o sea todo completo el diseño en donde puedo comprarlo todo
Hello Michael, where can I get drawings or the necessary parts to build this table. Very nice design.
Hi Len,
Please watch my update video on my table. You will see why I never went ahead with plans or a kit.
czcams.com/video/hbxqE7z0t-w/video.html
I'd love the plans I really want to build one for my spouse.
I am putting together a set of part drawings and Bill of Material. Should be done in a few weeks.
@@michaelgec3344 did you complete it coz av been waiting. This is brilliant
@@michaelgec3344 we are waiting
@@abdourays4148 Please watch my follow up video. czcams.com/video/hbxqE7z0t-w/video.html
Hello Michael, Very impressive. Where would you recommend one gets the motors that get these tables to expand? I am on the lookout for them at the moment. Thank you
Thanks Michelle, not sure what you are asking for, there is no motors on this table
Lastima se no lo traduzcan
Very nice bro good work
.i love it. I can try to make it
Thanks Jocky
Hi Mr. Micheal, This looks amazing and very much impressed with this. Am looking for a table for 14 seators, could you please advise me how to send you the enquiry. Look forward for your reply.
Please watch my follow up video. czcams.com/video/hbxqE7z0t-w/video.html
I have only built one table and currently have no plans to build anymore. Thanks so much for you interest. And thanks for the compliment means a lot.
Just search for Fletcher-Capstan table.
Hi sir.Where can i buy metal details and how much it costs.I am from Uzbekistan
At this time I don't offer plans or kits. The reason is, watch my follow-up video czcams.com/video/hbxqE7z0t-w/video.html
I know you don't make the tables for sale. Would you be willing to sell your SolidWorks design?
If you send me your email, if you wish you can go through my website and contact me. I can send you what I have no charge, I have iges and 2-D.
Can you give me Purchase link of round table accessories
Hello! Can you plz contact me to order the hardware to apply this to a porcelain 12 mm table?
Thanks for your interests, I do not offer any hardware for this table
Hi Michael. Wow awesome build thank you for sharing! Are you selling the mechanism or lifting plates for this table? Do you have plans available?
Ramsey, thanks this kinda stuff is just hobby fun things. I don't offer kits or plans, I hope I gave enough info you can design and get working on your own.
No, he can't. This is a variety of the Fletcher Capstan table mechanism, which he has no legal right to commercialize. But you can easily find it now that you now the name.
@@calysagora3615 Not true. This is totally different mechanism, so he can commercialize if he wants. Also original patent for much simplier design from cca 1900 something is expired.
If there is any grain that gets stuck between the flaps when you fold them up is there potential for the grit to damage the surface?
Not sure what you are asking.
@@michaelgec3344 so the leafs fold over right? So if there's anything on the table that's grainy it could potentially scratch the finish right? I mean yeah you'd wipe them down before you fold it up. But it's just a thought.
@Jonathan, The big leafs, the small leafs and the star never touch each other.
Hi Mr.Michael really is very impressive to see your table, my sincere congratulations for your job !!!
I can darwin Solidworks, when I see one video about this kind of table, the first thing I thought was to draw one.
Do you sell the mechanism or the plans?
I create in Solidworks, I have most all parts in Solidworks.
Very good Mr.@@michaelgec3344
No he don't, and he can't, since this is a patented mechanism, from Fletcher-Caplan.
How many hours do you estimate were involved and what sort of ball park cost for the hardware?
Hi Michael, if your asking how long did I work on this new design, I worked right at a year before I came up with this design. Remember this is a hobby, so it wasn't 8 hours a day 5-6 days a week. If I were to build another using this design, knowing the design I would estimate 15 - 20 hours.
As for cost watch my update video,
czcams.com/video/hbxqE7z0t-w/video.html
@@michaelgec3344 Perfect answer to my question.Thanks.
How can I get this collapsible materials from Bangladesh? Can you give me any idea of store as well as the price?
Tapas, watch my follow up video
czcams.com/video/hbxqE7z0t-w/video.html
Hi Michael. Can you build a motorized version of your table that expands to 8 foot diameter?
Robert, sure I could design a table that expands to eight foot, this is something I have been working on. But I don't have the space and resources to do that. I am a small hobby shop. My real life is getting product to the US.
Please feel free to contact me at michael@gec-asia.com
👌👍👍👍
Thanks my friend
COOL
Hi Michael ,Can you tell me how large of the dimension of the table before and after expanding.
Thanks.
In closed position it's right 900mm, open 1,200mm
@@michaelgec3344 ths
👍💯
Isn’t this a version of the Fletcher Capstan table?
College, yes it is a version of Fletcher Capstan. There was been many different versions made over the years. This is just my version.
Where we got this machinism
Sorry I don't offer the mechanism , see update video
czcams.com/video/hbxqE7z0t-w/video.html
Where can I buy a table.like this?
Patricia, I don't offer this table to the market. Just built as a project. Tables like this are available but the are very expensive.
Thanks for your interest.
How much cost a expanding table
I have only made the one table in the video, I don't sell these tables.
What does it cost to get one of these tables?
Karolyn, sorry I don't build these for sale. I have only made just this one.
im looking for this.. where to buy this
Sorry I don't offer plans or kits at this time
Здравствуйте, а можно перевод на русский
Здравствуйте есть чертежи?)
can you please tell me the name of part used to rotate base
MRADUL, I think I know what your asking, it's called "lazy susan"
Thanks
Hi Michael. Do you sell these mechanisms?
Suzi sorry for the delay getting back to you. Please my update on my table
czcams.com/video/hbxqE7z0t-w/video.html
Is this available for purchase in one way or another? I’d love to buy!
Sorry, I have only built just the one in the video, I don't plan on building any more. I have been asked a number of times if I sell these tables, supply kits or if I have plans. At this time I don't offer any. But thank you for your interest.
@@michaelgec3344 understood, I saw your video about sourcing components, makes sense. Your design revisions make a lot of sense and seem to simplify this mechanism a lot. Going to try to make one of my own…
@@theamzngq Thank you, Thank you, Thank you, you are one of the few that understand not only the cost of a kit and that a set of plans pretty much useless. And thank you for recognizing the simplified design compared to other expanding table designs that have been around for a hundred years plus.
I built this table because of a dare from a good friend of mine back in the States. I design product for a living here in China. The biggest problem with these tables is raising the Star two levels and all were doing it from the inside.
After approx. a year of failed designs after failed designs, it's like a hammer hit me on the head, Michael you frickin idiot. One set of outer ramps and raise everything. "Simple"
Good luck on your build and if I can be of any help please feel free to contact me.
@@michaelgec3344 Yes, I particularly like the genius behind having an "outside" and "inside" set of ramps.
I plan on trying to make a larger table, so I'll need to figure out how to adjust the mechanism to make that work. Should be fun! I'm also going to start by building a scale model version using 3D printed parts to prove it out ahead of the full size build.
@@theamzngq The first table I built and designed and redesigned many times on to prove my design was a 4 foot to 5 foot table. I did most design in CAD, then physically prove the design using wood and patching crap together here and there. The table looked like a piece of swiss cheese. I work in Solidworks, I have most of the 3D models and I made most 2D prints for the parts I had fabricated, it you wish I have both 3 foot tabled and 4 foot table if your interested.
The difference to go from a 3 foot table to a 4 foot table is minor, very little changes. All heights stay the same, the only thing that really changes, as for the mechanics is the arms and arm anchor plate.
Can I ask where you are from? Me, I am an old Kansas farm boy. Just turned 60 and living my dream in Asia, southern China to be exact.
If you wish me to send what I have in the way 3D models and 2D prints no problem, but there will be no type of plans or explanations, I just don't have time to put all that together. But no problem send to you via internet. No charge go through it save what you want, throw out the rest.
I have had many comments and direct contact to my email on how the operation of the table. I may plan on doing a total in depth video. Your Thoughts should I do a total in depth. I don't mind giving my knowledge away.
Do you sell these and how much?
Hi, sorry I don't sell these tables. Only have built the one and no plans to build any more. Thanks
Thanks for the reply! Great work on the table!!!
Can u share the dimensions of each part.i want to make it
Keshaw, I have been asked both for plans and people wanting to buy all the components. All the components got very expensive, then add shipping cost, duties just didn't seem logical. So I am thinking of putting together prints and bill of material for all the parts.
You should sell the hardware
Do you still live in China would you be
interested in having a visitor? I am a 3rd generation stair builder.
Nicholas, yes I still live in China, you must live in China yourself if your talking about a visit. If not it could be a very long time before we could visit. I live in Zhuhai, where do you live in China? my personal email is sales@gec-asia.com
Hi
Do you have any design for round table with attached chairs with articulating arms for saving space.
If you are interested please reply and I will provide you my contact info .
Sorry I don't have any plans for the table, was just a fun project. Thanks for your interest.
Hi. Can you send me the plans,pls!
Jack, I have been asked both for plans and people wanting to buy all the components. All the components got very expensive, then add shipping cost, duties just didn't seem logical. So I am thinking of putting together prints and bill of material for all the parts.
@@michaelgec3344 good idea
@@michaelgec3344 Thanks for doing this for us. If you can sell the materials, especially the metal parts, for us to install, after making the wood parts on our own, I think that would be a win-win situation.
@@oldporkchops I did look into it, it just gets to expensive. See update video
czcams.com/video/hbxqE7z0t-w/video.html