I was about to do this with the transfer cap system I just got in, and thought hey maybe homie has a don't fuck it up video I should watch... I LOVE HOW MUCH I CAN RELY ON YOUR WISDOM BRO
For anyone wondering it is possible to mix colors with 2 Male cans. all you need is a adapter, place it on the feeder can, and place the stem of the recieving can into the side where a cap would go. so far I've only used the uprok on rusto with great results and zero mess
A trick I do that I’ve never seen mention before to make sure you fill it up fully is weigh the can you want to refill (whiles it’s still full) and then when you go to refill it keep weighing it until it’s at said weight, boom full can
hmm that's a good question but I don't actually know enough about the nozzle on a ground marking can to say for sure. if you can remove whatever nozzle it comes with and it's a male valve, you could put a cap adapter on it and then put the tool I used in this on top of that. You would have to hold the rusto can as the upside down one in that case. But that only works assuming there is a male valve in the ground marking can that an be exposed and fitted cap adapter
@@ScizGraffiti a rusto valve. Would fit in a marking can male valve the thing is that marking can only spray pointing down. Ive tried switching up and one down or side by side but you can get pressure from a marking can to transfer only way ive been able to do it is by puting a on the marking can and puting a rusto to it and receive it but its a mess probly get 30 percent tranferd. Cus of the loss of paint
@MrSteezyR rite on im able to tranfer but at a very slow pace with those cans sometimes i get it quick but thanks for the info ive never seen a vid on youtube about this
No, don't pull it out! The cans you bought have a male valve system and the caps are also male. So one way to solve that is to get a cap adaptor that I show at 3:10 in this video. That would go on the can directly, and the caps would fit on top of the adaptor
Smaller can = easier to carry. Some might want something that is small to conceal. Also, the smaller can has no mixing ball and is silent. Furthermore, you can mix colours to your heart's content. Those are the 3 main reasons most people would probably give you
For anyone new to graffiti. They're really great for refilling with scrap cans for tagging later.
Tru dat
I gotta say i actually dig the "dirty chrome" as you put it
It does have a nice tint to it 🤔
great idea to transfer scents to refillable air freshener diffuser container ❤ 👽
I was about to do this with the transfer cap system I just got in, and thought hey maybe homie has a don't fuck it up video I should watch...
I LOVE HOW MUCH I CAN RELY ON YOUR WISDOM BRO
haha glad it helped!
For anyone wondering it is possible to mix colors with 2 Male cans. all you need is a adapter, place it on the feeder can, and place the stem of the recieving can into the side where a cap would go. so far I've only used the uprok on rusto with great results and zero mess
Yes i have a 50ml mini can and this methods works really well
Nice! Glad to hear it from someone else too!
cool :)
Thank you for the video!
No problem Juan!
Nice sharing,great video,thanks for sharing very nice❤️❤️..❤️❤️🙂👍..................👍👍beautiful keren..👍............
thank you :)
Way cool
A trick I do that I’ve never seen mention before to make sure you fill it up fully is weigh the can you want to refill (whiles it’s still full) and then when you go to refill it keep weighing it until it’s at said weight, boom full can
True! That's smart man. Way more accurate than just feeling it out like I usually do haha
Do how to extingduisher video
hi
👋 :)
How would you transfer from a Ground Marking. Spray can to a Rustoleum ??
hmm that's a good question but I don't actually know enough about the nozzle on a ground marking can to say for sure. if you can remove whatever nozzle it comes with and it's a male valve, you could put a cap adapter on it and then put the tool I used in this on top of that. You would have to hold the rusto can as the upside down one in that case. But that only works assuming there is a male valve in the ground marking can that an be exposed and fitted cap adapter
@@ScizGraffiti a rusto valve. Would fit in a marking can male valve the thing is that marking can only spray pointing down. Ive tried switching up and one down or side by side but you can get pressure from a marking can to transfer only way ive been able to do it is by puting a on the marking can and puting a rusto to it and receive it but its a mess probly get 30 percent tranferd. Cus of the loss of paint
@@carlosolguin84 ah gotcha. Yeah maybe an adapter with a transfer cap system is the best you can do then
@MrSteezyR rite on im able to tranfer but at a very slow pace with those cans sometimes i get it quick but thanks for the info ive never seen a vid on youtube about this
Question ❓
I bought graffiti caps on amazon. Krylon paint from Walmart. The caps don't fit cause the white stim on it.
Do I pull that outa the can
No, don't pull it out! The cans you bought have a male valve system and the caps are also male. So one way to solve that is to get a cap adaptor that I show at 3:10 in this video. That would go on the can directly, and the caps would fit on top of the adaptor
Where you get the ironlak from?thanks for the video
I have a goos stock of the 600ml gold and chromes. So I would have got this stuff from bombingscience before they stopped stocking it :(
👍✨
What’s the point of this if I can ask
Smaller can = easier to carry. Some might want something that is small to conceal. Also, the smaller can has no mixing ball and is silent. Furthermore, you can mix colours to your heart's content. Those are the 3 main reasons most people would probably give you