VW MK 4 trans swap 2 of 3 wiring
Vložit
- čas přidán 8. 09. 2024
- this is video 2 of 3 in the 01m auto to manual swap for a MK 4 volkswagen. The example used in this video is a Jetta but the process is the same for Golf/GTI and Beetle. This is a little long but covers the wiring in depth for each connection and each circuit.
Dude, thank you so much for simplifying the wiring idea.. I was so apprehensive and scared to even try it but after watching I felt 100% that I (novice) can do it. Almost got the tranny in now and ready to see it rip. I’d imagine we will need to get tuned regardless after it’s all back up n running. Also you have made every step clear as day and given me more confidence
This video series helped me out a lot, Thank you!
I have the exact same car going to 5 spd.
I tried testing out the sensors with my multimeter before putting them in the car... the starter interlock switch was a clear on and off circuit, while the cruise control switch seamed to do nothing (I tested two)
test them with the locking tabs in the locked position. It is a tricky little switch to test but it needs to 'think' it is installed
Amazing job with this series! Thank you. Any idea why I would have a 214 relay in place instead of a 175 relay? Someone else did the swap years ago but the only wiring they did was the VSS - I've had no backups, cruise or clutch switch. Can I use the 214 instead of a 53 in order to wire the rest of the functions up?
No idea on the 214. It would probably work fine but I’m not familiar with a 214. Any relay will work as long as it’s 12 volt and can handle the amperage draw of the starter. You will just have to adapt my wiring diagram to the pin out on what ever relay you use. I think you would spend more time doing that (figuring the pin out in a 214 relay and then adapting the wiring plan) that the $10 a 53 relay would cost but it’s your option
Did your dad make it?
yes he did thank you, he is doing pretty well now
For swapping manuel to auto what has to be change on wiring
That’s pretty much the video. I suggest you watch the video
@@hesty32 i meant to do auto swap from manuel car
If you are talking about putting an auto in a manual car, I can’t help you. There are more circuits adding a TCU and all the trans sensors plus the circuits to the shifter itself than I would bother trying to map out
How do I do the vss wiring
I’m assuming you have an 09A auto so then you should watch the 09A tiptronic series instead to see the VSS wiring. czcams.com/video/ncKRdmGXfsQ/video.htmlsi=Vva8a5Cl9LO3PTuk