@@parkerjohnson5420 appreciate that… even a few years in I’m learning on the editing/filming of videos. I don’t have fancy equipment or anything, but I do the best with I can with what I have. Love talking about and trying out tools 👍👍
I have the wera tool check plus. Older version. I have had it for 2.5 years. At my job I can get 80% done with just that tool. Very handy. I know not everyone likes them. But since I purchased mine about 6 other employees have also gotten them because they seen how handy they are.
Joey thank you for making great content and gathering this great bunch of people in your comment section. I’ve said for a while now that your channel deserves to grow a lot more.
They say you get more subscriptions if you ask in the videos… I’m not sure if it’s true or not, but I know I don’t subscribe just because somebody asks 😂
@@MORGANSMaintenance when people join because they do feel the need to all by themselves I feel they might be around longer. That what I do anyway. And I guess the comment section might not be the same if you had a 100k followers. And I know the comment section is a big part of you even doing these videos.
@@MORGANSMaintenance that why really big accounts normally become a production company with a bunch of staff. And I don’t think you would even want that.
Small tip/trick for the tool check plus- You can take out Wera's rapidaptor, and replace it with a 1/4-5/16 flip socket. The malco fits flush, as if it were made for it, but I like the Klein because It works as a bit holder as well, and only sticks out slightly, and I run other Klein flip sockets. I bought the imperial version, removed the 4 smallest sockets, added a 9/16", 8mm, 10mm, 13mm, and the shortest Klein flip socket- covers more of what I run into. I also changed out a lot of the bits so I have SAE and Metric hex bits. I keep mine in my overalls pocket daily, so I can justify tweaking it. I honestly can't believe how much use I get out of that little driver and ratchet, because they're always on me.
I've been super impressed with what I can get done with the Tool Chevk Plus. One thing that expands the value of it is you can also buy either the Imperial or Metric 1/4" sockets separately on a rail, I keep that in the same pouch so it gives me even more capability 👍🏻
I got lucky and caught the tool check plus on a sale for $64 a while back. It’s still expensive but it is very handy with all it comes with. I’m an electrician and do a lot of low voltage security and cameras. With the little driver and small ratchet, it comes in handy often to get into tight spaces. Great tool. I like your videos!
I got the Klein wrenches when you put out the video of them 50% off. First set of ratcheting wrenches I've ever bought and they were well worth it. Thanks very much for the tip.
for screwdrivers, sure but never really needed a screwdriver for a fastener that i couldn't use a drill/driver for. 1 thing though about the magnets if you put them on a bit and expect to see the screwhead.. forget about it. they get in the way of seeing the screwhead. i thought i would edc the makita 1 (green) back when Makita golds were still a thing and i had the hardest time tightening 4 square boxes because i couldn't see best the magnet completely eclipse any view of where to put the bit into the fastener slot but for building and running long screws into 2x4s it does a good job on keeping the screw on the bit
@@toolsandtactics 👍👍 I think they are going to be more a small magnatizer/demagnatizer for me to throw in a small Veto pocket. I can see it being hard to see the tip “that’s what she…”
Great video, Klein tools rock. Wish I would of gotten those wrenches for $40. I also avoided the Wera kit, but saw too many good people like yourself talk about the Tool Check Plus, I finally caved and bought the metric kit. Wera rocks. THX AGAIN!
I think they are a nice “to go” set. And if you use them in someone’s home it’s nicer to have that softer case to lay them out in. Less likely to scratch the surface
@@youcanthide004 appreciate it… I’m a tool junkie so I figure I share what I buy to help people decide if they could use it or not. Glad you found some things 👍
Joey, Thank you for taking the time to do these videos! It's really nice to get honest tool reviews from someone who does not get freebies all the time from manufacturers. There are too many reviewers who seem to be "agents" of manufacturers or distributors. Do you get many freebies from manufacturers or distributors? I understand that you let viewers know when something has been given to you--correct? Your videos are terrific! You tend to review items that you have purchased yourself--that gives you great creditbility!
I occasionally get things for free, but it’s not often. I always mark it a paid promotion if I get something for free even if they aren’t “paying me”. I will always mention it as well. I turn down more things than I decide to get. I will only take something if it is something we might actually use. I always tell the company the only way I will take it, is if I can be 100% honest.
That’s a great haul, I’ve had my eye on the wera tool check. I’m glad you got a menards finally Morgan. You’re gonna save big money at menards. Don’t forget to mail off your 11% rebate
Yeah that 11% made these only $4.00 The Tool check is nice. I’d probably still want to catch it on a deal, but that’s because I’m someone who doesn’t really “need” anything it offers. I have something else already that does it. It’s a good option for someone who really needs those things to get it all at once.
Nice tool haul! I did pick up both of the Klein ratcheting sets for $40 each the other day. Nice enough wrenches and definitely worth $40 per set. I'd prefer offsets with a switch, but that'll never happen for $40. I colored in the white logo on the metric pouch with a sharpie so I could tell the difference too. Hard to tell the difference otherwise.
Thanks for sharing these deals! I picked up some Toughbuilt Fastener Bags at Menards tonight. They were hidden in the corner of the store, far from tool bag aisle where their web site said they would be. I had to ask an employee for help.
Love the "trade" idea 😂😂 I like watching and commenting on this channel because this is one of the few channels I know I'll get a response. Great content, keep it up!
When buying light look for high CRI (color rendering index). Most lights including Olight use cheap ugly LEDs that have green or blue tint to them and they don't display color accurately, it can help define details like is that a snake or a stick.
That Warsun T7 flashlight looks just like the Nebo Slim Mini. That’s what I’ve been using for about a year now to just carry around on me at all times. That’s a great little light. 300 lumens and has a magnet on the bottom. Super handy. They’re only like 15 bucks
Nice haul. I have another brand of bit magnetizer, and it is very useful. This has become one of my favorite channels, even though it has cost me a few chunks of change😅.
Oh that is a “downside “ of this channel for sure 🤣🤣. No all jokes aside my work life improved a lot in the two years I’ve really paid attention to tool channels both on here and on Instagram. And yes there is a lot of twats praising garbage out there but guys like Joey help you find things I had no idea where out there. And so many times I’ve thought to myself if only I had that 20 years ago wauw that would have helped so much with x y and z. Now I’m the guy and my Coworkers go to because “ I’m sure you have something for this “. Some of this stuff just makes it that a oh shit moment becomes a chance to use something and get it done. I’m kinda rambling but it’s late and I’m tired lol
@@MORGANSMaintenance and then they ask where did you get that? And then next thing you know your ordering 5 vessel electric screwdrivers from Japan for them
Definitely picked up the Klein ratchet wrenches after you posted it was Lowe’s deal of the day. I think at $80 each, I couldn’t pull the trigger. But, $80 for both was worth it. Thanks for the videos!
@@MORGANSMaintenance They carry Knipex, and their store brand tools have same type of warranty as Harbour Freight. My mothers, grandma's family, is Menards and Ben Franklin. My father's, mother is Kentucky.
I like that those Toughbuit fastener bags are more portrait style than the usual parts bags you can get, availability doesn't look good in the UK though, will try a harder search when I get time. Those Klein spanners are a nice set, will be interesting to see how robust they are over time, wish they would add a 7mm in as well though.
The price for that Tool check plus is what is keeping me from getting it! Now if I can find it for cheaper I might pull the trigger on it. Nice review!
I picked up the one with imperial sockets for $53, and the one with metric sockets for $67, so the price does drop sometimes. Price trackers are helpful.
Yeah I was the same. I still think it’s a little overpriced, but it is a nice set and I see why so many people like it. If you bought it all individually, the price makes sense I guess
Alot of fun stuff! I've had thoes toughbuilt pouches before and they are well built and the base msrp was 13ish dollars decent value. The malco still continues to be my go to and kinda stopped using the klein flip sockets. I don't like spinning that much weight on a impact assemble disassemble for the few sizes I need can be covered by a few malcos. What's the country of origin on that new malco I sure hope it's still Taiwan. The tool check plus I use to use a decent bit and as it's value to alot of people. Now bit sets like the vessel usa big big case cover most needed and odd size bits. It's not like I'm gonna not have other full size tools. I did drill out the plastic rivets on the side for the bit holding handle to make it more compact it does help. I've recently has 2 youtubers I enjoy and sent them care packages of unused tools they appreciate it and it's only thr cost of shipping to me. To be fair I've offered a few times to send you stuff it's why I had to go behind your back and get someone else to send you things. The klein wrench rolls look very usable I almost wish I picked up the sets to gut them. I have leather and canvas ones from az currently that are good quality (around 20$ each) but I like that flat shape myself. As always I'm glad you love for the comments it's shows because you have regulars that actually care. Would it be nice to make more money sure but if you like the interaction like us regulars do that's a reward in itself for your hard work. We all know each video takes a bit to make and edit 10 minutes equals hours of work. By the way because you don't badger us to like and subscribe made me want to. I know it's how people make money but disruption of the flow of rhe video makes it almost worse. Keep on trucking and we will continue to support you.
The Malco is made in Taiwan… Yeah you have offered and I appreciate it. I have always had a hard time with people “giving” me stuff. It’s even the same with companies. I love giving to people and I shouldn’t rob people of an opportunity to do the same for me, it’s just my mindset of not wanting to put someone out.
Yea people offer because you deserve it. Also like the other stuff I've shipped in the past was never anything from the current arsenal of tools always extras and spare stuff. I know there's probably a few that would agree with me we just want the tool to find a good home instead of a landfil or scrap yard. My area selling used tools dosent bring much money or hardly worth the effort. I have given tons of vintage tools I restored for the fun of it to the boy scouts they have distributed them to people in need. It's actually no diffrent I'm real life if someone really loves something I have and I have spares they find there way to them to pass on the goodwill. I refuse to put them in a bucket and say a buck a peice and maybe make 30 40 bucks? I'd rather have smiles per gallon 👍
First of all GDAY from Australia, love your vids. Those toughbuilt fastener bags go for $60-$135 AUD so for under $5 USD is a steal, be careful the police might be around to take a statement. Stay safe
Hey Joe not sure if you caught wind of it yet but Milwaukee Pipeline just announced the Super Packout rolling cart, we are finally getting a large pull out bin on the rolling cart so you can still grab your stuff with a stack on top
I have the Vessel bit holders clipped to my Veto bag. On one of my longer bits I have attached I keep the Vessel magnet on it so I can just slip it off that and use it on any other driver. I just used it the other day when I had to change the water inlet valves in my washing machine. It just happened to have it attached to my Vessel ball handled #2.
I may try some out. I run through them on acoustic ceiling tile jobs. Especially the ones with reveal edges. My favorite for that have been some older Stanley FatMax blades, but they quit selling those specific ones. I bought a bunch off eBay, but I’m about out. So I might see how those work.
Milwaukee has a really good magnetizer that’s made for their slim type bits. I was able to force it onto the middle of the double sided bit that came with that $13 vessel ball handle screwdriver with a ph2 & 1/4” flathead, it was magic haha
I’ve seen those. I use bit holders 90% of the time so I don’t think to try those. I bought these to mainly try on screwdrivers. They don’t fit over a 1/4” flathead… or at least yet I’m going to try and get one to do it 😂
Love your videos,,always check my feed for latest from morgan,,,was in plant maintenance out of high school,then went on railroad for forty years till retirement but still enjoy fixin things…….be well..
Mr. Joey Morgan ! You're gonna make it to 20K! It’s really no surprise how You've grown Your Channel. Great content, presented by a sincere, dedicated Creator. You have integrity, and Faith, and I believe You have been blessed by it. But then You went and ruined this Video for me, when You showed those Klein wrench sets! 😯🙄 I wasn’t able to get them for myself. 😢 🤣 My local Lowe’s stinks! Glad You got them, and they look good. I do like the tool rolls. Take care, Stay safe, and blessed! 👍🙏💪🇺🇸😊
@@MORGANSMaintenance I know, ‘they’ say “Beware the Flatterer,” but it comes from the Heart. Now ifn ya doesn’t let me know about them thar wrenches in a future sale, I will be upset Joey! BWAHHAHHA 😯😆😂🤝
If you ever get the time and tools, any chance we could get a Bit Magnetic Enhancer comparison video? I'd be curious to see how the Milwaukee, Makita and Vessel magnets stack up and how secure they fit on different brand bits
Thanks for creating a great channel. That menards toughbuilt sale on tool bags belts and pouches was exceptional! Too bad shipping was working out far more than the cost of the items.
I'm taking out a planter box and it has a ton of lug bolts that are literally buried into the wood, flush. Would a saw tooth bit work for something like that?? I've been using a claw hammer to just split the wood but it's been a pain. I had not seen those before.
@@turbot_ possibly if it’s the right size. I’m not sure how long they will last on wood. They are meant more for tape, caulk, etc. but they do have teeth
It works with a Holster… it’s a Spider Drill Pin Spider "PRO" Tool Holster with Drill Pins - How it Differs from the Original #tools #maintenance czcams.com/video/inxvIE-C9cs/video.html Here they are on Amazon amzn.to/3zpdgIZ
I have the Wera Tool Check Plus and Vessel Mag Enhancer. Both good products. I’m going to order the Warsun tonight. I was just looking for something like that, but ended up getting the TrustFire Mini X3, which has a flashlight, UV light, laser, and front facing light. And it’s USB-C. TrustFire would probably send you one to review. The fit and finish isn’t quite as nice as Olight, but it’s also almost half the price.
@MORGANSMaintenance Can’t go too wrong with an $11 light. I just ordered it using your link. Also, if you’re looking for more bit magnets, Anex, Engineer, SK11, and Takagi Earth Man have some interesting ones. They’re listed as “mug catch(er)” and “screw catch(er)” on AMZN Japan. Those brands also have interesting keychain bit holders(similar to Railer’s) and locking bit holders. There’s also something on there called the Takagi Earth Man Share Link Multi-Tool that you might get a kick out of. It’s the kind of tool that could only be reviewed on April Fool’s Day.
$1 for the blades???? Dang, the nearest Menard's to me is 210 miles away. I just picked up 50 Milwaukee blades at the Depot and was happy with paying $9.90!!!
Yeah it’s not a bad deal… and my scraper has to have those ToughBuilt blades specifically. My closest one was pretty far away, but we finally got one in the town I work in.
Has anyone compared the klien ratchet wrenches with the wera joker ratchet wrenches? They look similar even with the color coating. I just have a hard time spending the wera price.
I don’t know if I’ve seen the Ridgid ones. I will see if I can look them up. I’m sure there are lots of similar things. I saw Vessel and “Red”, so I pulled the trigger 😂
Makita makes a blue one they sell in hds. The better one I found is a new milwaukee one that is kinda rubber like. It comes in a set with some 2in philips bits. Better yet it fits over any bit and even over slightly larger ones 5/16+
It's 2 magnets inside rubber silcone so it should give you that extra stretch. I tried it on a 5/16 bit and a 11/32 rod it can do it with a little persuading
I’m not real sure if they are or not… I didn’t get the box or anything with it. I’d have to look it up and see, but I don’t think so. Someone else may answer before I find the answer.
They are not specifically impact rated but they last fine under normal use. Put a 1/2 impact wrench to 1/4 in adapter and put 1100 ft lbs on them I'm sure most bits would break.
I’ve actually only got one 10” myself. I don’t use them as often so I don’t have a double. We will see if Maybe someone else on here will have an extra that will.
You have one of the most informative tool channels on the tube! Great videos!
@@parkerjohnson5420 appreciate that… even a few years in I’m learning on the editing/filming of videos. I don’t have fancy equipment or anything, but I do the best with I can with what I have.
Love talking about and trying out tools 👍👍
I have the wera tool check plus. Older version. I have had it for 2.5 years. At my job I can get 80% done with just that tool. Very handy. I know not everyone likes them. But since I purchased mine about 6 other employees have also gotten them because they seen how handy they are.
I like it better now that I see the actual size. I thought it was bigger
All great items! Thanks for sharing!
@@the-handy-fixer appreciate it 👍👍
Most informative and useful channel on CZcams in my opinion.
Appreciate it 👍👍
Joey thank you for making great content and gathering this great bunch of people in your comment section. I’ve said for a while now that your channel deserves to grow a lot more.
They say you get more subscriptions if you ask in the videos… I’m not sure if it’s true or not, but I know I don’t subscribe just because somebody asks 😂
@@MORGANSMaintenance when people join because they do feel the need to all by themselves I feel they might be around longer. That what I do anyway. And I guess the comment section might not be the same if you had a 100k followers. And I know the comment section is a big part of you even doing these videos.
@robholland5925 agree… I’m not sure I could keep up with a 100k comment section 😂
@@MORGANSMaintenance that why really big accounts normally become a production company with a bunch of staff. And I don’t think you would even want that.
@@robholland5925 no… I never want Yourube to be a “full time” thing. I like working too much.
Small tip/trick for the tool check plus- You can take out Wera's rapidaptor, and replace it with a 1/4-5/16 flip socket. The malco fits flush, as if it were made for it, but I like the Klein because It works as a bit holder as well, and only sticks out slightly, and I run other Klein flip sockets. I bought the imperial version, removed the 4 smallest sockets, added a 9/16", 8mm, 10mm, 13mm, and the shortest Klein flip socket- covers more of what I run into. I also changed out a lot of the bits so I have SAE and Metric hex bits. I keep mine in my overalls pocket daily, so I can justify tweaking it. I honestly can't believe how much use I get out of that little driver and ratchet, because they're always on me.
Thanks for the info and tips… those are good ideas. 👍👍
Wera sets are always a good purchase.
They cost so much that you MUST like them :)
True 😂… the cost convinces you if nothing else
I've been super impressed with what I can get done with the Tool Chevk Plus. One thing that expands the value of it is you can also buy either the Imperial or Metric 1/4" sockets separately on a rail, I keep that in the same pouch so it gives me even more capability 👍🏻
@@toolswithtim2019 yeah the only one set of sockets is what’s always kept me from buying it. Having both sets is a good option 👍
I got lucky and caught the tool check plus on a sale for $64 a while back. It’s still expensive but it is very handy with all it comes with. I’m an electrician and do a lot of low voltage security and cameras. With the little driver and small ratchet, it comes in handy often to get into tight spaces. Great tool. I like your videos!
Appreciate your feedback. I can see why so many people like it
I got the Klein wrenches when you put out the video of them 50% off. First set of ratcheting wrenches I've ever bought and they were well worth it. Thanks very much for the tip.
Glad you like them.. they are pretty nice
for screwdrivers, sure but never really needed a screwdriver for a fastener that i couldn't use a drill/driver for. 1 thing though about the magnets if you put them on a bit and expect to see the screwhead.. forget about it. they get in the way of seeing the screwhead. i thought i would edc the makita 1 (green) back when Makita golds were still a thing and i had the hardest time tightening 4 square boxes because i couldn't see best the magnet completely eclipse any view of where to put the bit into the fastener slot but for building and running long screws into 2x4s it does a good job on keeping the screw on the bit
@@toolsandtactics 👍👍
I think they are going to be more a small magnatizer/demagnatizer for me to throw in a small Veto pocket.
I can see it being hard to see the tip “that’s what she…”
Great video, Klein tools rock. Wish I would of gotten those wrenches for $40. I also avoided the Wera kit, but saw too many good people like yourself talk about the Tool Check Plus, I finally caved and bought the metric kit. Wera rocks. THX AGAIN!
Appreciate it. It was a good deal at $40 for a truck set.
I had the WERA recommended to me more times than just about anything.
👍👍👍
Bought the Wera tool check and it’s a great as a maintenance guy I use it daily…
I have an idea how I’m going to use it in my new vest. If I ever get it, I ordered the thing in February and still haven’t got it
I always enjoy the tool reviews and hauls when I tune in. Keep up the good work.
Appreciate it 👍👍
I’m going to pick up the wrenches just for that same reason thanks
I think they are a nice “to go” set. And if you use them in someone’s home it’s nicer to have that softer case to lay them out in. Less likely to scratch the surface
I got those same toughbuilt bags, I use them for a ton of stuff - thats a killer price too
They do seem nice. I wish mine had more in stock
Love your channel man I agree with everything you got here. I have a few of them just ordered a couple of them and a few more on the list.
@@youcanthide004 appreciate it… I’m a tool junkie so I figure I share what I buy to help people decide if they could use it or not. Glad you found some things 👍
Joey, Thank you for taking the time to do these videos! It's really nice to get honest tool reviews from someone who does not get freebies all the time from manufacturers. There are too many reviewers who seem to be "agents" of manufacturers or distributors. Do you get many freebies from manufacturers or distributors? I understand that you let viewers know when something has been given to you--correct? Your videos are terrific! You tend to review items that you have purchased yourself--that gives you great creditbility!
I occasionally get things for free, but it’s not often. I always mark it a paid promotion if I get something for free even if they aren’t “paying me”. I will always mention it as well.
I turn down more things than I decide to get. I will only take something if it is something we might actually use. I always tell the company the only way I will take it, is if I can be 100% honest.
Agreed. MM is one of the only tool review channels I trust, because he’s honest and really knows what he’s talking about.
@kiwe3546 appreciate it 👍
Heads up on the flash light. It's back in stock with the $4 off coupon.
@@search_eternal appreciate it.. I’ll do a post also 👍
Love my Wera tool-check plus. It sits right in the front pocket of my TP-XXL bag and it's one of the things I find myself reaching for most often.
I definitely see the appeal a little more now that I’ve held one. It’s really all about that case. A lot in a compact package
Appreciate all the videos.
Thank you… appreciate you watching 👍👍
That’s a great haul, I’ve had my eye on the wera tool check. I’m glad you got a menards finally Morgan. You’re gonna save big money at menards. Don’t forget to mail off your 11% rebate
Yeah that 11% made these only $4.00
The Tool check is nice. I’d probably still want to catch it on a deal, but that’s because I’m someone who doesn’t really “need” anything it offers. I have something else already that does it. It’s a good option for someone who really needs those things to get it all at once.
Nice tool haul! I did pick up both of the Klein ratcheting sets for $40 each the other day. Nice enough wrenches and definitely worth $40 per set. I'd prefer offsets with a switch, but that'll never happen for $40. I colored in the white logo on the metric pouch with a sharpie so I could tell the difference too. Hard to tell the difference otherwise.
That’s a good idea on the coloring in. I guess they should have thought about that and did something on the outside
Thanks for sharing these deals! I picked up some Toughbuilt Fastener Bags at Menards tonight. They were hidden in the corner of the store, far from tool bag aisle where their web site said they would be. I had to ask an employee for help.
Glad you got some 👍👍
Love the "trade" idea 😂😂
I like watching and commenting on this channel because this is one of the few channels I know I'll get a response. Great content, keep it up!
I almost didn’t want to respond to this so it would be ironic 😂😂
@@MORGANSMaintenance I would've had to seriously rethink my comment 😐🤣
When buying light look for high CRI (color rendering index). Most lights including Olight use cheap ugly LEDs that have green or blue tint to them and they don't display color accurately, it can help define details like is that a snake or a stick.
@@Varyingmonotone 👍👍. I’d rather just think everything is a stick 😂😂
That Warsun T7 flashlight looks just like the Nebo Slim Mini. That’s what I’ve been using for about a year now to just carry around on me at all times. That’s a great little light. 300 lumens and has a magnet on the bottom. Super handy. They’re only like 15 bucks
👍👍… hadn’t seen that one but good light at $11-$15
Nice haul. I have another brand of bit magnetizer, and it is very useful.
This has become one of my favorite channels, even though it has cost me a few chunks of change😅.
If it makes you feel any better… I’ve bought almost everything I’ve showed you.. ouch 😂😂😂
Oh that is a “downside “ of this channel for sure 🤣🤣. No all jokes aside my work life improved a lot in the two years I’ve really paid attention to tool channels both on here and on Instagram. And yes there is a lot of twats praising garbage out there but guys like Joey help you find things I had no idea where out there. And so many times I’ve thought to myself if only I had that 20 years ago wauw that would have helped so much with x y and z.
Now I’m the guy and my Coworkers go to because “ I’m sure you have something for this “. Some of this stuff just makes it that a oh shit moment becomes a chance to use something and get it done.
I’m kinda rambling but it’s late and I’m tired lol
@robholland5925 I’m the guy on site that everyone says the same thing… that and “what new stuff do you have” 😂
@@MORGANSMaintenance and then they ask where did you get that? And then next thing you know your ordering 5 vessel electric screwdrivers from Japan for them
@@robholland5925 I did order that exact thing for a guy I work with a lot 😂
Definitely picked up the Klein ratchet wrenches after you posted it was Lowe’s deal of the day. I think at $80 each, I couldn’t pull the trigger. But, $80 for both was worth it. Thanks for the videos!
Glad you were able to get some. I felt the same way. $80 each was a bit much
The tough built sales have been great. I picked up a bunch of the bags, belt pouches and utility blades.
It is a good deal on all those 👍👍
Most of it isn't a sale they are not doing well very unstable right now hince lowes clearance on all there products and other stores.
Nice haul Joey ... Thx
Appreciate it 👍👍
Menard's, is my favorite place.
Green & Gold, forever baby.
☀️🌿🥇⚒️
PS ...
Amazon, your okay too...sometimes.
Unless its, Veto...
They just opened one in the town I work in… I had been in one before, but not real often
@@MORGANSMaintenance
They carry Knipex, and their store brand tools have same type of warranty as Harbour Freight.
My mothers, grandma's family, is Menards and Ben Franklin.
My father's, mother is Kentucky.
@@VRCM_Skywarn_XUSA I saw the Knipex in there the other day
@@MORGANSMaintenance
That's where I get, my Knipex tools at.
I work, First Response/Healthcare so I never have a pick up location. Ever...
I like that those Toughbuit fastener bags are more portrait style than the usual parts bags you can get, availability doesn't look good in the UK though, will try a harder search when I get time.
Those Klein spanners are a nice set, will be interesting to see how robust they are over time, wish they would add a 7mm in as well though.
Yeah they had some skips in there.
I’m not sure what’s going on with ToughBuilt over here. It isn’t being carried much by many stores in my area
The price for that Tool check plus is what is keeping me from getting it! Now if I can find it for cheaper I might pull the trigger on it. Nice review!
I picked up the one with imperial sockets for $53, and the one with metric sockets for $67, so the price does drop sometimes. Price trackers are helpful.
Yeah I was the same. I still think it’s a little overpriced, but it is a nice set and I see why so many people like it. If you bought it all individually, the price makes sense I guess
Alot of fun stuff! I've had thoes toughbuilt pouches before and they are well built and the base msrp was 13ish dollars decent value. The malco still continues to be my go to and kinda stopped using the klein flip sockets. I don't like spinning that much weight on a impact assemble disassemble for the few sizes I need can be covered by a few malcos. What's the country of origin on that new malco I sure hope it's still Taiwan. The tool check plus I use to use a decent bit and as it's value to alot of people. Now bit sets like the vessel usa big big case cover most needed and odd size bits. It's not like I'm gonna not have other full size tools. I did drill out the plastic rivets on the side for the bit holding handle to make it more compact it does help. I've recently has 2 youtubers I enjoy and sent them care packages of unused tools they appreciate it and it's only thr cost of shipping to me. To be fair I've offered a few times to send you stuff it's why I had to go behind your back and get someone else to send you things. The klein wrench rolls look very usable I almost wish I picked up the sets to gut them. I have leather and canvas ones from az currently that are good quality (around 20$ each) but I like that flat shape myself. As always I'm glad you love for the comments it's shows because you have regulars that actually care. Would it be nice to make more money sure but if you like the interaction like us regulars do that's a reward in itself for your hard work. We all know each video takes a bit to make and edit 10 minutes equals hours of work. By the way because you don't badger us to like and subscribe made me want to. I know it's how people make money but disruption of the flow of rhe video makes it almost worse. Keep on trucking and we will continue to support you.
The Malco is made in Taiwan…
Yeah you have offered and I appreciate it. I have always had a hard time with people “giving” me stuff. It’s even the same with companies.
I love giving to people and I shouldn’t rob people of an opportunity to do the same for me, it’s just my mindset of not wanting to put someone out.
Yea people offer because you deserve it. Also like the other stuff I've shipped in the past was never anything from the current arsenal of tools always extras and spare stuff. I know there's probably a few that would agree with me we just want the tool to find a good home instead of a landfil or scrap yard. My area selling used tools dosent bring much money or hardly worth the effort. I have given tons of vintage tools I restored for the fun of it to the boy scouts they have distributed them to people in need. It's actually no diffrent I'm real life if someone really loves something I have and I have spares they find there way to them to pass on the goodwill. I refuse to put them in a bucket and say a buck a peice and maybe make 30 40 bucks? I'd rather have smiles per gallon 👍
@@MattHmm-rq6dn that’s a good way to live my friend 👍
First of all GDAY from Australia, love your vids. Those toughbuilt fastener bags go for $60-$135 AUD so for under $5 USD is a steal, be careful the police might be around to take a statement. Stay safe
Wow, that’s a lot of money for those. Must be huge import fees. I’d be carrying my fasteners in whatever the store sold them in 😂
Hey Joe not sure if you caught wind of it yet but Milwaukee Pipeline just announced the Super Packout rolling cart, we are finally getting a large pull out bin on the rolling cart so you can still grab your stuff with a stack on top
I haven’t watched all of them yet, but I did see that one. Looks super nice 👍
My local stores stopped selling toughbuilt all together. Not sure what’s going on because I like their belt pouches
My Lowe’s doesn’t have any of their pouches anymore. Only a few screwdrivers and some StackTech
I have the Vessel bit holders clipped to my Veto bag. On one of my longer bits I have attached I keep the Vessel magnet on it so I can just slip it off that and use it on any other driver. I just used it the other day when I had to change the water inlet valves in my washing machine. It just happened to have it attached to my Vessel ball handled #2.
I think they are pretty nice. Work well 👍👍
I also bought those Klein wrenches. Unfortunately I bought two sets of the Metric and zero of the SAE. Ended up selling the extra metric set for $60.
Not too bad to get one metric set for $20 all in.. 👍👍
Lennox gold blades for utility knife are the absolute best blades. Get em ! All Lennox knifes and tools rock check em out you won’t be disappointed.
I may try some out. I run through them on acoustic ceiling tile jobs. Especially the ones with reveal edges.
My favorite for that have been some older Stanley FatMax blades, but they quit selling those specific ones. I bought a bunch off eBay, but I’m about out. So I might see how those work.
Milwaukee has a really good magnetizer that’s made for their slim type bits. I was able to force it onto the middle of the double sided bit that came with that $13 vessel ball handle screwdriver with a ph2 & 1/4” flathead, it was magic haha
I’ve seen those. I use bit holders 90% of the time so I don’t think to try those. I bought these to mainly try on screwdrivers. They don’t fit over a 1/4” flathead… or at least yet I’m going to try and get one to do it 😂
Love your videos,,always check my feed for latest from morgan,,,was in plant maintenance out of high school,then went on railroad for forty years till retirement but still enjoy fixin things…….be well..
Appreciate that… I bet railroad work was interesting, must have been to stay with it for 40 years 👍
Nice Tool Check :)
Appreciate it.. I do think it will be handier than I expected not having seen it in person. It’s more compact than I thought it would be.
Mr. Joey Morgan ! You're gonna make it to 20K! It’s really no surprise how You've grown Your Channel.
Great content, presented by a sincere, dedicated Creator. You have integrity, and Faith, and I believe You have been blessed by it.
But then You went and ruined this Video for me, when You showed those Klein wrench sets! 😯🙄
I wasn’t able to get them for myself. 😢 🤣 My local Lowe’s stinks! Glad You got them, and they look good. I do like the tool rolls. Take care, Stay safe, and blessed! 👍🙏💪🇺🇸😊
Appreciate the kind words 👍👍
Maybe they will run them on sale again one day 🤞
@@MORGANSMaintenance I know, ‘they’ say “Beware the Flatterer,” but it comes from the Heart. Now ifn ya doesn’t let me know about them thar wrenches in a future sale, I will be upset Joey! BWAHHAHHA 😯😆😂🤝
@@georgedavall9449 I’m keeping my eyes on them. I check certain places for deals nearly everyday 👍👍
@@MORGANSMaintenance 👍💪🙏🇺🇸
I picked up the Klein ratchet wrenches as I was watching your video on the metric and SAE for 80.00, that’s a deal , thanks man
👍👍 GLAD YOU GOT SOME
If you ever get the time and tools, any chance we could get a Bit Magnetic Enhancer comparison video? I'd be curious to see how the Milwaukee, Makita and Vessel magnets stack up and how secure they fit on different brand bits
I just looked at the Makita in Home Depot yesterday while I was looking for the Milwaukee which they didn’t have. I will see if I can find them
I will see if I can find local or order the Milwaukee one and send your way
@@danbegin8532 I was able to get them both online this morning 👍
@MORGANSMaintenance that is why you are my people, I would've done the same
@@danbegin8532 👍👍
Thanks for creating a great channel.
That menards toughbuilt sale on tool bags belts and pouches was exceptional! Too bad shipping was working out far more than the cost of the items.
I saw the Toolbelts there too. I didn’t need one of them, but it was a good deal.
Luckily they just opened one in the town I work in
Just got home from work time to tool n bake
👍👍 you must be a West Coaster… or a 2nd shifter
Those Klein ratchet wrenches are cool. The fact that the 16 and 18 mm aren't included makes it a no for me. Too bad.
👍👍… yeah they have some skips
I'm taking out a planter box and it has a ton of lug bolts that are literally buried into the wood, flush. Would a saw tooth bit work for something like that?? I've been using a claw hammer to just split the wood but it's been a pain. I had not seen those before.
@@turbot_ possibly if it’s the right size. I’m not sure how long they will last on wood. They are meant more for tape, caulk, etc. but they do have teeth
what is that little black knob sticking off the m12 for?
It works with a Holster… it’s a Spider Drill Pin
Spider "PRO" Tool Holster with Drill Pins - How it Differs from the Original #tools #maintenance
czcams.com/video/inxvIE-C9cs/video.html
Here they are on Amazon amzn.to/3zpdgIZ
I have the Wera Tool Check Plus and Vessel Mag Enhancer. Both good products. I’m going to order the Warsun tonight. I was just looking for something like that, but ended up getting the TrustFire Mini X3, which has a flashlight, UV light, laser, and front facing light. And it’s USB-C. TrustFire would probably send you one to review. The fit and finish isn’t quite as nice as Olight, but it’s also almost half the price.
I will look up that light and check it out 👍👍
For $11 the Warsun is nice… in my opinion. Time will tell
@MORGANSMaintenance Can’t go too wrong with an $11 light. I just ordered it using your link.
Also, if you’re looking for more bit magnets, Anex, Engineer, SK11, and Takagi Earth Man have some interesting ones. They’re listed as “mug catch(er)” and “screw catch(er)” on AMZN Japan. Those brands also have interesting keychain bit holders(similar to Railer’s) and locking bit holders.
There’s also something on there called the Takagi Earth Man Share Link Multi-Tool that you might get a kick out of. It’s the kind of tool that could only be reviewed on April Fool’s Day.
@@k1_w3 appreciate it. I haven’t scrolled around Amazon Japan in a bit. I will have to check those out
That light looks great. Unfortunately, it’s not $11 anymore.
Hey 👋
Hey to you 👋 😂
👍👍
@@MORGANSMaintenance how are you
@@jeremynguyen2346 doing great 👍
@@MORGANSMaintenance good 👍
$1 for the blades???? Dang, the nearest Menard's to me is 210 miles away. I just picked up 50 Milwaukee blades at the Depot and was happy with paying $9.90!!!
Yeah it’s not a bad deal… and my scraper has to have those ToughBuilt blades specifically. My closest one was pretty far away, but we finally got one in the town I work in.
Dose the 3/8s Klein socks fit in the ratcheting 11 in 1 I know the 1/4 set dose
I don’t believe so. I don’t have it, but from what I’ve seen/heard it doesn’t.
Has anyone compared the klien ratchet wrenches with the wera joker ratchet wrenches? They look similar even with the color coating. I just have a hard time spending the wera price.
I haven’t bought any of the Jokers yet.. maybe someone else has
Looks like that flash light is sold out. :(
They already took the coupon down… I guess it’s out all together now. Maybe they will stick it back by Prime Day
those vessel magnetizers seem bulky to the old blue round ones from ?Ridgid?
I don’t know if I’ve seen the Ridgid ones. I will see if I can look them up. I’m sure there are lots of similar things. I saw Vessel and “Red”, so I pulled the trigger 😂
Makita makes a blue one they sell in hds. The better one I found is a new milwaukee one that is kinda rubber like. It comes in a set with some 2in philips bits. Better yet it fits over any bit and even over slightly larger ones 5/16+
@@MattHmm-rq6dn I will have to check that out because these won’t fit over my slotted vessel tang through. A little bit to narrow
It's 2 magnets inside rubber silcone so it should give you that extra stretch. I tried it on a 5/16 bit and a 11/32 rod it can do it with a little persuading
@@MattHmm-rq6dn 👍
Are the wera bits you have there impact rated?
I’m not real sure if they are or not… I didn’t get the box or anything with it. I’d have to look it up and see, but I don’t think so.
Someone else may answer before I find the answer.
According to what I found they are not… you have to get “impactor” sets for that
They are not specifically impact rated but they last fine under normal use. Put a 1/2 impact wrench to 1/4 in adapter and put 1100 ft lbs on them I'm sure most bits would break.
Would you be willing to sell me a KNIPEX 10” pliers wrench I lost mine and I haven’t had the money to replace them?
I’ve actually only got one 10” myself. I don’t use them as often so I don’t have a double.
We will see if Maybe someone else on here will have an extra that will.
If u can get wera , Klein don’t get vessel😂 cheap 💩 in japan
I like all three of them. My screwdrivers from Vessel are actually my favorite, but it’s mainly for the handle