SIMPLE & EASY Setup CNC Machine in Easel without connecting
Vložit
- čas přidán 1. 09. 2021
- 🟢𝐆𝐨-𝐓𝐨 𝐁𝐮𝐝𝐠𝐞𝐭 𝐟𝐫𝐢𝐞𝐧𝐝𝐥𝐲 𝐁𝐈𝐓𝐒: amzn.to/3bOoE1z & amzn.to/3b2gvax
#cncrouter #cnc #howto
#Affiliate links fund the channel; paying for software, recording eqiupment, bits and other shop tools ALL without costing you anything extra & I'm usually able to swing the best discounts for you too!
🟢𝐂𝐚𝐫𝐯𝐞𝐜𝐨 𝐌𝐚𝐤𝐞𝐫 𝐅𝐑𝐄𝐄 𝟗𝟎-𝐝𝐚𝐲 𝐭𝐫𝐢𝐚𝐥:
store-us.carveco.com/products...
Use coupon code "𝐒𝐀𝐋𝐄" at checkout to give me credit on your free trial, and if you decide to keep using the software after the trial expires you'll get a 5% discount attached to your account going forward! So if you ever decide to upgrade or purchase the software outright, you still get the discount!
Disclaimer: Tools are dangerous, be safe. - Věda a technologie
UPDATE: the metric work area bug has been fixed! 👍
What cnc do you use with easel?
Sounds good, hope Inventables fix those " little" errors don't really want a cutting area 25.4 ft wide !!
Thanks for the video, seth! As I understand correctly...
If my machine is a workbee style1500(x-axis) x 1000(y-axis) controlled by the X-controller. I setup a new machine > 3rd party > 'other' (because I don't see the specific built in the list).
Do I only have to change the work area to 1280mm (x-axis) x 824mm (y-axis)? Or are there other settings that I have to change in the advanced settings (machine inspector)?
The machine is a belt driven (z-axis lead screw).
Great info as always Seth.
My easel account don't have a option for the spindle control to go to automatic it only has manual and hardware option
Correct, in October 2022 the "automatic" was renamed to "hardware". So for a software controlled spindle like on the 3018, you'd select "hardware"
For a manually switched spindle like a router you'd select "manual"
My copy of easel dosen't show the Generate g code option or Advance option when i click on general setting
it there another way of finding ?
Select project>download gcode 👍
Seth, I'm very new to the CNC world. I have a MillRight Mega V XL machine and attempting to design in Easel on a MAC. Yes, a MAC! I Know, it's not the ideal set up, but it's what I currently have. I am having a difficult time generating a G Code. The "Generate G Code" button is no where to be found. Any assistance would be greatly appreciated. Thanks in advance!
Mark
This is under the project menu near the bottom.
Hi Seth. Thanks for the video.....I have a problem. When I choose "other machine" to create a profile , a website opens to tell me I would have to install the easel drivers. But I am not using an X-Carve or so. I cant find the page to set up my machine. Do you know whats going on???
Yes, I did happen to already have that driver installed. Unfortunately even creating the fictitious profile does require downloading the easel driver
@@SethCNC Thanks a lot
I have no audio.
Must be a setting, sound works fine for me 😎