Video není dostupné.
Omlouváme se.

How to install Bosch Washing Machine VarioPerfect Serie 4 - Bosch Washing Machine Installation

Sdílet
Vložit
  • čas přidán 5. 08. 2024
  • How to install Bosch Washing Machine VarioPerfect Serie 4 in Simple Easy Steps. In this easy to follow video I will take you through the simple steps for the Bosch Washing Machine installation.
    This video assumes you have uninstalled your old washing machine first and that you have all the existing plumbing and pipework in place.
    During the COVID-19 outbreak many firms are not installing washing machines but you can install a washing machine yourself.
    Replacing a washing machine is a fairly easy task, the only problem is the weight of the washing machine and making sure you do not get any water leaks after the new Bosch washing machine installation.
    Connect a new Bosch washing machine Serie 4 yourself and save MONEY.
    New Washing Machine installation video which also covers Drainage Hose pipework under the sink here • Install a Washing Mach...
    Other useful Videos to help you save ⏱TIME and 💰 MONEY:
    How to Disconnect a Washing Machine for Recycling or Moving • How to Disconnect a Wa...
    Washing Machines • Washing Machine F05 Er...
    Dishwashers • Siemens Dishwasher E23...
    Toilets and Plumbing • How to remove Cistern ...
    Combi Boiler • How to set timer on Co...
    How To's, Life Hacks, Helpful Tips here • How to clean a Thermos...
    Washing Machines:
    How to install a new Washing Machine • How to install a new W...
    Washing Machine not Draining Water Fixed • Washing Machine not Dr...
    Washing Machine Fabric Softener Dispenser not Emptying Fixed • Washing Machine Fabric...
    Washing Machine Drum Noise Spinning Fixed • Washing Machine Drum N...
    How to Clean your Washing Machine to keep it Hygienically Fresh • How to Clean a Washing...
    How to Fix a Smelly Washing Machine • How to Clean a Smelly ...
    Bosch\Siemens:
    Bosch Serie 4 VarioPerfect Washing Machine EcoSilence Drive:
    Review & Wash Cycle • Bosch Serie 4 VarioPer...
    SuperQuick 15 minute Wash in Realtime • Bosch Washing Machine ...
    How to remove Dispenser Drawer • How to remove Dispense...
    Detergent Drawer Symbols & How to use them • Bosch Washing Machine ...
    Maintenance Tips for Maximum Efficiency • Bosch Washing Machine ...
    Display Panel Overview • Bosch Washing Machine ...
    How to remove Aqua Inlet Filter • How to remove Aqua Inl...
    E18 Error Code Fix Bosch Siemens Pump Filter blocked • Washing Machine E18 Er...
    E32 Error Code Do not Panic • Washing Machine Error ...
    How to activate Child Lock • How to activate Child ...
    Door Stuck and How to Open it • Bosch Washing Machine ...
    Beeping Hell How to turn off beeping noise • Beeping Hell How to tu...
    How to remove Dispenser Drawer from Siemens Washing Machine • How to remove Dispense...
    0:00 Introduction and what we will be doing.
    0:57 Removing contents from Drum.
    1:24 Register your Bosch Washing Machine.
    1:31 Remove Transportation bolts (very important!).
    3:21 Install Drainage Hose.
    3:51 Install Mains cold water feed hose (use the NEW hose).
    5:04 Check pipework for any leaks.
    5:37 Plug machine into the Mains socket.
    5:53 Push Washing Machine into it's new Home.
    6:18 Careful not to put pressure on Pipework.
    6:39 Check pipework looks ok.
    6:57 Adjust the feet so Washing machine is level.
    7:59 Tighten feet locking nuts to stop machine becoming unlevel over time.
    8:32 Run an empty quick wash to flush it through.
    8:59 Check pipework again for leaks and drainage flows freely.
    9:51 Final Spin, make sure it is firm and sturdy & not shaking.
    10:39 Time for a well deserved cup of Tea.
    #boschwashingmachine
    #boschserie4
    #washingmachineinstallation

Komentáře • 187

  • @rogers484
    @rogers484 Před 11 měsíci +1

    Thanks!

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 11 měsíci

      Thank you sooo much for your kind donation,
      I really do appreciate it. All the best 😎

  • @thomasct4834
    @thomasct4834 Před 3 lety +7

    Today I brought the same WM and service man demanded a high cost installation fee. By seeing this videos I have installed my wM . Thank you so much . Much appreciated. You saved my 100€ .

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Now that’s what I call a great Saving! I know I say I’m here to save you time and money but that’s great! Glad I could help out. 😎

  • @anarresnaturalapothecary2078

    You are an unsung hero. I've never seen such a clear no bs thorough how to installation video in my life. Thanks for the hot tip about locking the levelling nuts. I'm having a cup of coffee before I get at it! Thanks again!

    • @anarresnaturalapothecary2078
      @anarresnaturalapothecary2078 Před rokem

      I'm replacing a Fagor that had a bunch of things fail on it (door, panel, leakage) and it takes SO LONG to get parts. I'm nervous that the leaking problem is my plumbing, but since a male person told me that was not the problem, I'm taking the chance that it was the washer pump.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před rokem

      Thank you, really appreciate it. I try to keep all my videos easy to follow and to the point. 😎

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před rokem

      If it was the cold water feed inlet pipe leaking you'd see the staining and damage. Hopefully it was your old machine.

  • @FestivalChic
    @FestivalChic Před 2 lety +3

    Thank you so much for making this video! I couldn't afford to spend extra to get my machine installed. I've managed to do it myself, thanks to your help 😊

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 2 lety

      Marvellous, I think it’s about £60 for installation so that’s a great saving! Glad to help out and well done for getting it all fitted. 😎

  • @rogers484
    @rogers484 Před 11 měsíci +1

    His solution on how to unlock a Bosch washer: Clear, to the point, didn’t waste my time, no upsell and IT WORKED!! Thx!

  • @LurgsHowToGuides
    @LurgsHowToGuides  Před 4 lety +5

    Other useful Videos to help you save ⏱TIME and 💰 MONEY:
    Washing Machines:
    =================
    How to Disconnect a Washing Machine for Recycling or Moving czcams.com/video/wRtSJ6dK0J0/video.html
    How to install a new Washing Machine czcams.com/video/NGptwJDCTjo/video.html
    Washing Machine not Draining Water Fixed czcams.com/video/WxNRAMWDY2w/video.html
    Washing Machine Fabric Softener Dispenser not Emptying Fixed czcams.com/video/R5xIKjWuAIg/video.html
    Washing Machine Drum Noise Spinning Fixed czcams.com/video/mJo6IloTP1U/video.html
    How to Clean your Washing Machine to keep it Hygienically Fresh czcams.com/video/NbOUDxk7Yxw/video.html
    How to Fix a Smelly Washing Machine czcams.com/video/07B0BYKw-gs/video.html
    .
    Washing Machines czcams.com/video/0_gst8RokRo/video.html
    Dishwashers czcams.com/video/6z22-Ysn7rE/video.html
    Toilets and Plumbing czcams.com/video/vT5KwJ2A2eU/video.html
    Combi Boiler czcams.com/video/1gGEP2y_qHM/video.html
    How To's, Life Hacks, Helpful Tips here czcams.com/video/dcmxUTsedlk/video.html
    .
    Bosch\Siemens:
    ==============
    Bosch Serie 4 VarioPerfect Washing Machine EcoSilence Drive:
    Review & Wash Cycle czcams.com/video/IccZCkQfBG0/video.html
    SuperQuick 15 minute Wash in Realtime czcams.com/video/4YgoBzj5fjQ/video.html
    How to remove Dispenser Drawer czcams.com/video/cj6ZupxqZEQ/video.html
    Detergent Drawer Symbols & How to use them czcams.com/video/SyoOvThCfUA/video.html
    Maintenance Tips for Maximum Efficiency czcams.com/video/eQZfevfTC-Q/video.html
    Display Panel Overview czcams.com/video/5Ps19okbE9c/video.html
    How to remove Aqua Inlet Filter czcams.com/video/1rvrUKbjt9o/video.html
    E18 Error Code Fix Bosch Siemens Pump Filter blocked czcams.com/video/qYjn8xnW3Pc/video.html
    E32 Error Code Do not Panic czcams.com/video/JAMGpceI6wc/video.html
    How to activate Child Lock czcams.com/video/yHMtk7pycG4/video.html
    Door Stuck and How to Open it czcams.com/video/JGJA8J7cB7w/video.html
    Beeping Hell How to turn off beeping noise czcams.com/video/fkJ4VU6ldLk/video.html
    How to remove Dispenser Drawer from Siemens Washing Machine czcams.com/video/HXAJlGbF-Vw/video.html
    .
    Hotpoint\Indesit:
    =================
    Hotpoint Aquarius Washing Machine Detergent Drawer Compartments & What goes Where czcams.com/video/XSkF_5t6DhE/video.html
    F05 Error Code Fix czcams.com/video/0_gst8RokRo/video.html
    F06 Error Code Door won't Open Fix czcams.com/video/RCnxTPkQJ90/video.html
    H2O Error Code Fix czcams.com/video/gtRyR1gQj6I/video.html
    How to clean Hotpoint Aquarius Washing Machine Pump Filter and Dispensing Drawer czcams.com/video/x1E_gBvOtCw/video.html
    How to remove Dispenser drawer from Hotpoint Washing Machine czcams.com/video/ML5JgFcS4jI/video.html

  • @uluaiono528
    @uluaiono528 Před 3 lety +2

    28Feb21 1419 Thank you from Aotearoa New Zealand. Just unpacked an i-DOS Serie|8 and your video caused me to fix my drain-hose installation. Awesome.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Great stuff. Glad I could help and lucky you for living in a beautiful part of the World. It's on my list of places to visit one day. 😎

  • @guineagirl5078
    @guineagirl5078 Před 5 měsíci +1

    Just bought Bosch Serie 4 model. Last Bosch lasted 17 years! New model is amazing 😅😂❤😊

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 5 měsíci +1

      Nice one. Let’s hope this one lasts just as long!

  • @splashyreacts
    @splashyreacts Před 3 lety +1

    Thanks. I just followed this vid to install my washing machine on my own.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Great stuff, always a good feeling doing things yourself. Nice one. Glad I could help and have a marvellous weekend. 😎

  • @TW-xz4hc
    @TW-xz4hc Před rokem +1

    Thank you for this awesome step by step installation. Your teaching is very easy to follow. 👌🏾👍🏾

  • @Heartflowers
    @Heartflowers Před rokem +1

    This is high quality and informative I feel confident and I am going to have a cup of tea thank you

  • @figaro8105
    @figaro8105 Před 3 lety +1

    I'll be buying one of these in a few week's, thanks to your video it shall be a breeze to install.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Fabulous. It’s a nice quiet machine, hope the install goes well and I look forward to you revisiting my video when the time comes. 😎

    • @argjentpacolli
      @argjentpacolli Před 3 lety +1

      How is this machine so far? Im about to buy one tomorrow. Is it worth it?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Yes been pleased with it, nice and quiet compared to older machines.

  • @cgravaris
    @cgravaris Před 3 lety +2

    Thanks for this, didnt realise about the transport bolts and the thing nearly took off! turned it off asap removed them and its perfect!

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety +1

      Costa Gravaris Good job you noticed it straight away and hadn't set it to start when you were out! Glad it all worked out. 😎

    • @cgravaris
      @cgravaris Před 3 lety +1

      @@LurgsHowToGuides me too. Thought I was almost going to be in A rodeo! Working great now. Lol.

    • @juwayriyatalhamuhammad749
      @juwayriyatalhamuhammad749 Před 3 lety +2

      Me too, didn't know about transportation bolt my machine was moving making a lot of noise At the first wash, I was thinking of returning it. Thanks to him I don't have to.

  • @cristiangonzalez4510
    @cristiangonzalez4510 Před rokem +2

    La mejor explicación de intalación que he visto 10 de 10, gracias!! 😁👍

  • @TimTam1007
    @TimTam1007 Před 3 lety +2

    Very helpful! Thank you mate

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Great stuff, hope you got it installed ok and glad I could help. 😎

  • @hannahmphaka7986
    @hannahmphaka7986 Před rokem +1

    Very easy to follow. Thank you

  • @lusiashikukumwa1077
    @lusiashikukumwa1077 Před rokem +1

    Thank you. I was installing my new Bosch washing machine 😁

  • @lsowata3085
    @lsowata3085 Před rokem +2

    Thank you so much for this! 😀❤️

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před rokem

      Glad to help, hope it all went ok. Have a fabulous weekend. 😎

  • @remnantsrita18
    @remnantsrita18 Před 3 lety +1

    This video was great thanks

  • @joebyrne2288
    @joebyrne2288 Před 9 měsíci +1

    Great video and very informative. Just bought this Bosch model in currys in Dublin . I’m replacing a 19 year old zanussi . 👍

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 9 měsíci +1

      Wow the Zanussi has done well. I don't think the Bosch will last that long. Glad my video helped. 😎

  • @jameschand6684
    @jameschand6684 Před 3 lety +2

    Mate! Your videos are the best! Good work!! 🙂

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Thank you. 😎

    • @annedunlop2963
      @annedunlop2963 Před 4 měsíci

      Are most of the Bosch cables at the bottom? I'm worried mine won't reach my plug...it's arriving soon 😮 hopefully it is and it should fit ok🫣

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 4 měsíci

      Yes they are all at the bottom

    • @annedunlop2963
      @annedunlop2963 Před 4 měsíci

      Thanks that's great...much appreciated...👌

  • @benjiwild
    @benjiwild Před 3 lety +1

    Thanks for your help.

  • @siddheshbarkale2338
    @siddheshbarkale2338 Před 2 lety +1

    Very Helpful.

  • @thananchjeyansothilingam9560

    Thank you so much

  • @rohandivate6154
    @rohandivate6154 Před 4 lety +1

    Nice video 👍

  • @Geeta1810RB
    @Geeta1810RB Před rokem +1

    We buy it just 1 day
    Your information is best
    Thanks bhai

  • @amani510
    @amani510 Před 3 lety +2

    Legend 🙌🙌 saved me time and embarrassment 🙏❤️

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      My motto is “I’m here to save you time and money’, maybe I’ll have to add ‘embarrassment’ as well ! Glad I could help. 😎

  • @edit_x_17
    @edit_x_17 Před 2 lety +1

    Thanks ☺️

  • @lacolorationdubois7307
    @lacolorationdubois7307 Před 2 lety +1

    Thank you

  • @freedom9041
    @freedom9041 Před rokem +1

    Thanks I am replacing mine with 800 series washer and dryer here in Canada. Taking a risk with their ventless 800 series dryer as well and it's scares me a lot whether I will be burning the cash or it will be a happy deal.

  • @GK-qc5ry
    @GK-qc5ry Před 7 měsíci +1

    Great video, will help me. The only thing I'm scared about is that the washing machine space is so tight, I can't see the cold water pipe or check that there are no leaks, so have to hope for the best.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 7 měsíci

      Yes that's common. Just try to get pipes in a decent position before you slide it back.

  • @sibusisoharvey2652
    @sibusisoharvey2652 Před 2 lety +1

    you saved me R500 plus
    Thank you so much!

  • @chinteliao1086
    @chinteliao1086 Před 4 měsíci +1

    Thx you do save me some money

  • @rinzin1237
    @rinzin1237 Před 2 lety +1

    Thanks

  • @alanegan7971
    @alanegan7971 Před 8 měsíci +1

    Simple and easy to follow. Repaplacing Asko horror.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 8 měsíci

      Thank you, I'm so glad it was useful for you. Hope it all went ok. 😎

  • @remnantsrita18
    @remnantsrita18 Před 3 lety

    Yes indeed I ended up returning the washing. As it was leaking. I followed y to our institutions to the T. I had bought an ex display from Currys. Called Bosch for assistance. After reading out the NR number etc. Turns out my washing was not only 4 years old but obsolete! I’m getting a new one on Friday.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Now that was on display a long time! Good news you are getting a new one, good luck with the installation, this video should cover it all.

  • @malcomwalters9439
    @malcomwalters9439 Před 4 měsíci +2

    Just watched your video, am waiting for the w/machine to be delivered, then I'll install it like you say!😊

  • @agusgusnandi5298
    @agusgusnandi5298 Před 3 lety

    i.m mantenan new and how to configure the washing machine bosch

  • @evolutionbros2198
    @evolutionbros2198 Před 4 lety +1

    Would you recommend your serie 4 as I’m thinking about replacing my 16 year old classixx 1000 when it finally gives up thanks for the video 👍

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 4 lety +1

      Evolution Bro's Yes, the reason we got it is because it's very quiet. I think the Serie 6 can handle a bigger load so maybe that one if you do lots of washing.

    • @evolutionbros2198
      @evolutionbros2198 Před 4 lety +1

      Lurgs How To Guides thanks you tbh a serie 4 should be alright as it’s only be for me just noticed my old one starting to give up so looking at new ones thanks again 👍

  • @manikmahajan4365
    @manikmahajan4365 Před 4 lety

    What will happen if we use top load detergent in front load washing machine and which detergent liquid or powdered???

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 4 lety

      Don't know, I've never used a top loader before but I'm guessing it's all the same. Or just use the Pods which go straight in the drum, they are the easiest things to use.

  • @dikshaagarwal3526
    @dikshaagarwal3526 Před 2 lety +1

    You connected with cold water, how it use hot water? Do we need to connect a T pipe for hot water?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 2 lety

      No need, cold water feed only. All modern washing machines heat the water up inside the machine.

  • @franedwards6403
    @franedwards6403 Před rokem

    How much room do I need at the rear of the machine for the water hose connection. I'm installing in a corner of fitted units & can't have the machine protruding beyond my 600 worktop. Thanks.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před rokem

      Well a 600mm depth worktop is standard and Washing Machines are designed to fit under that without protruding too much. Depends if your cold water feed hose is directly at the back of the machine as this may mean you have to have it slightly forwards. Ideally your cold water feed should be at the side of the machine at the back.

  • @della1760
    @della1760 Před 3 lety +2

    Hello, Is it necessary to have a hotwater hose connected? Im from a place where its summer all year long and we dont use hot water. Just cold water. This will be my first frong loader as im used to the top loader and am wondering if there is a need/must for a hot water pipe
    Many thanks

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety +2

      No this model is cold water feed only, nearly all modern washing machines are cold water feed only as they heat the water up inside the machine.

    • @della1760
      @della1760 Před 3 lety

      @@LurgsHowToGuides thank you

  • @TheLankawa
    @TheLankawa Před 3 lety +1

    Hi, I’ve got both cold & hot water point pipes, does it matter to which one i connect the hose?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety +3

      In theory no but connect it to the cold water feed, this will have better pressure and also you may do a cold water wash which won't be any good if you are connected to the hot. Your washing machine auto heats the water to the correct temperature.

    • @TheLankawa
      @TheLankawa Před 3 lety +1

      @@LurgsHowToGuides Thanks mate!!

  • @deeanahwinders1938
    @deeanahwinders1938 Před rokem

    What do the small plastic clips do? Are they necessary to instal?

  • @elvispolksalad
    @elvispolksalad Před 4 lety +1

    Brill video could you do another cycle demo please like the sports wear or down

  • @argjentpacolli
    @argjentpacolli Před 3 lety +1

    What's your rating about this machine. Is it worth it? Currently i have Gorenje and planning to replace it after 5 years!

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Yes we really like it as it's so quiet even on the fastest spin (as long as it's level).

  • @nauroz3
    @nauroz3 Před rokem

    How to take out cover cap from rear while transporting

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před rokem

      Not sure what part you mean. Have a look at this video, hopefully it covers it. czcams.com/video/wRtSJ6dK0J0/video.html

  • @chandrashekarbk007
    @chandrashekarbk007 Před 3 lety

    Hi, I bought a new bosch washing machine but during the safe removal of 4 screws from the backside, while placing cover caps, one cap went down inside the washing machine... will that cause any serious problems in future, please suggest....!!!!

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Sorry I’m not sure, did it not drop out to the bottom?

    • @chandrashekarbk007
      @chandrashekarbk007 Před 3 lety

      @@LurgsHowToGuides bottom is covered completely so don't know

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      I seem to recall someone else had a similar issue, check all the comments. Hopefully it won’t cause a problem but what a silly design!

  • @wmangus
    @wmangus Před 3 lety +1

    hello, my old WM is broke, I want to buy a Bosch machine, I have a small problem, that is space, my old machine goes under the kitchen unit, but I have only got 82.1cms space, I had to remove the top of the old model to put into the space, does the top of the machine come off for service, if so what will height of the machine then be, I intend to put the new machine into the kitchen unit without a top, the space is so tight that without the top nothing is going to get inside

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      I’ve just measured ours for you and it’s 86cm so it’s not going to fit.

  • @michaeldanso7373
    @michaeldanso7373 Před 2 lety

    Please what causes the foam to leak out through the soap dispenser section

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 2 lety

      Maybe you’ve put too much detergent in, it shouldn’t leak out

  • @nondumisotonyela9411
    @nondumisotonyela9411 Před 2 lety +1

    Hi, iam using Bosch series 4 washing machine and I have an error displaying on machine a key error and It is making a noise. How do I reset the machine or remove the error?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 2 lety

      Are you sure it's not the child lock? Also when the machine is running the key icon will light which indicates that you cannot open the door. Hope that helps.

  • @anh3356
    @anh3356 Před 2 lety +1

    Nice video. But you can show detail balance this device. I have problem with that. 😢😢

  • @user-zi3jx6xu4g
    @user-zi3jx6xu4g Před 8 měsíci +1

    Can I buy this model if the drainage pipe input is higher that the washing machine? Thank you

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 8 měsíci

      Yes it should be ok. Almost all washing machines have the drainage hose output at the bottom of the machine so it will always have to pump upwards. And many systems drain into a man under sink system so this will always be higher

    • @user-zi3jx6xu4g
      @user-zi3jx6xu4g Před 8 měsíci +1

      Thank you so much

  • @bassemmokhtar4853
    @bassemmokhtar4853 Před 2 měsíci

    hi Sir
    In my new series 4 8kg front load machine from bosch, after speed reduced cotton program ended, the machine beeped once not 3 times, and instead of typing end it showed 0:10 and unlocked the door.
    despite everything related to laundry was ok, i wonder why it behaved that way, any idea, please?

  • @davidmorrison6471
    @davidmorrison6471 Před 3 lety +1

    Enjoy your cuppa!

  • @zxz9041
    @zxz9041 Před rokem

    Is there any hot water input?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před rokem +1

      No only Cold water inlet feed required. Most modern washing machines and dishwashers only need cold as they heat up the water.

  • @remariodeer9677
    @remariodeer9677 Před 2 lety +1

    Mine is a hotpoint washing machine ill be replacing

  • @Jbjjbnnbbb22
    @Jbjjbnnbbb22 Před 2 měsíci

    My mashine makes loud sounds and dont pumps what can i do ? Its series 4 varioperfect

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 2 měsíci

      I expect you will have to call out a washing machine technician.

  • @Beko500ProGolover
    @Beko500ProGolover Před rokem +2

    I’m replacing my lg with a Bosch series 6 as the lg has been of very bad performance and bad quality.

  • @RaDiCaLRyAn69
    @RaDiCaLRyAn69 Před rokem +1

    Replacing an 8 year old bosh serie 4 with a new one. Hopefully get another 8 years out of the new model

  • @november132
    @november132 Před rokem

    The instructions on my machine say to use a hose clamp. Is this necessary?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před rokem

      On what hose? The drainage hose?
      If it goes under the sink onto drainage pipework then yes ideally put a clamp round it, but they are usually pretty tight anyway. If it just goes down into drainage pipework then just need a holder to stop it coming back out.

    • @november132
      @november132 Před rokem +1

      @@LurgsHowToGuides thanks, just reread the instructions and I don't need it

  • @zicozefs86
    @zicozefs86 Před 3 lety +1

    👍

  • @michaelgreen3542
    @michaelgreen3542 Před rokem

    What about levelling front to back of the machine?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před rokem

      The back feet aren't adjustable.

    • @michaelgreen3542
      @michaelgreen3542 Před rokem +1

      I just received today a series 4 machine. The rear feet ARE adjustable and the user manual asks you to level the machine in BOTH directions.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před rokem

      @@michaelgreen3542 Unless you have a perfectly level floor once it’s pushed back it’s hard to tell what feet you should adjust. I’d leave back ones and just adjust front unless you have a very unlevel floor.

    • @michaelgreen3542
      @michaelgreen3542 Před rokem

      @@LurgsHowToGuides OK. That is fair comment. Thanks.

    • @michaelgreen3542
      @michaelgreen3542 Před rokem +1

      Vibrations from the horizontal spin are most influenced by the front to back level..

  • @NL58NL58
    @NL58NL58 Před 9 měsíci +2

    👍👍👍👍👍👍👍

  • @ApplianceGuy
    @ApplianceGuy Před 4 lety +1

    No premire???

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 4 lety +1

      No. I realised I missed the locking nuts on the feet in the original video so I've deleted that and uploaded this version. So its the same but with a few extra minutes in.

  • @skyly8406
    @skyly8406 Před rokem +1

    Merci pour votre aide vous expliquez vraiment la notice n´est pas claire

  • @arunchandra1081
    @arunchandra1081 Před 3 lety

    Hi, How to remove those 4 clips

  • @jacktrainer2318
    @jacktrainer2318 Před 4 lety +1

    There’s no links on this video

  • @kammykwok2888
    @kammykwok2888 Před rokem +1

    🙏❤️🙏👍🏽👍🏽👍🏽👏👏👏

  • @razathewanderer
    @razathewanderer Před 3 lety +1

    My washing machine is walking long way after installation

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety

      Guess you mean working! If it was walking that would be impressive! 😎🤣

  • @muhammadhumaayun5156
    @muhammadhumaayun5156 Před 2 lety +1

    I am gonna buy 9 kg Bosh w/m

  • @rukmitarane5847
    @rukmitarane5847 Před 8 měsíci

    Aarya

  • @MohitMalhotra
    @MohitMalhotra Před rokem

    Bosch

  • @VanceProduces
    @VanceProduces Před 2 lety

    "Always use the brand new hose" - Why? Many, many other videos on YT highlight the unnecessary "up-sell" this represents. If the old hoses are functioning why replace? So wasteful.

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 2 lety +1

      A brand new washing machine comes with a new hose so may as well use it. I agree it's a waste if the old one is ok but they don't last forever and washers degrade over time.

    • @VanceProduces
      @VanceProduces Před 2 lety

      @@LurgsHowToGuides I agree, it makes sense if one comes default. However, some places sell the new hoses as a separate cost at which point I would deter someone from making that choice if theres no existing issue. Great vid, I appreciate you taking the time.

    • @ArminYekkalam
      @ArminYekkalam Před rokem +2

      Because of matching lifetime. Since your washing machine is new, it's hose should not be used, or the hose may go caput during the normal life of WM and you will have a leak!

  • @ashleymillington1938
    @ashleymillington1938 Před 3 lety +1

    Not being rude but if I was doing a CZcams tutorial I would make sure my house was clean

    • @LurgsHowToGuides
      @LurgsHowToGuides  Před 3 lety +3

      I'm gonna sack the cleaner.....ie. Me. The joys of trying to run a channel and have a full time job. Hope it helped anyway.

    • @keithdavies123
      @keithdavies123 Před 3 lety +4

      If that's all you can reply about, you need to get a life! Great video thanks. 👍

  • @kanmaneecoolen4301
    @kanmaneecoolen4301 Před 3 lety +1

    Thank you so much

  • @ofiravramento3160
    @ofiravramento3160 Před 2 lety +1

    Thanks!

  • @MoloiGWetsi
    @MoloiGWetsi Před rokem +1

    Thank you so much