Wood Turning.. How to make these wooden Fish..
Vložit
- čas přidán 28. 01. 2023
- Here I turn some wooden Fish..
Could be pendants or fridge magnets
If you would like to support my channel… you could do so by…
Liking and Subscribing or buying me a coffee… in the link below… its a one off payment… its not expected but very much appreciated…
www.buymeacoffee.com/AndyPara...
Disclaimer
this is not a tutorial .. this is the way that I like to work… you must only do what you deem to be safe… - Jak na to + styl
Was glad to see you came out unscathed! Nice project for little pieces. Thanks.
Hi Lyle...
Yes.. it was a bit scary.. these things happen so fast...
I'm glad that you liked the project... as you say..great for using scraps...
Take care my friend...All the best.....Andy
Andy, you’ve done it again! 👌👌👌👌👏👏👏👏👍👍👍👍
Nice….& TU Andy! Hope all is well for u & family in Cornwall!
God bless all of u!
Hi Roy...
Haha... thank you very much 👍👍
We are all fine thanks... I hope that you and yours are all well in Kentucky...
God bless you and your family...
Take care my friend...All the best.....Andy
Nice fish. When I wanted to add burn lines I didn't like the handle wire idea and so I took a cheap coping saw and use it to hold the wire. I can get pressure and I'm never around the wood. To get a variety of fish you could permaglue the 2 pieces and then split them with a saw to get 2 tone fish. Thanks
This quickly caught my attention. I agree with Gwynn that a small school if these would be very nice.
Hi JTLEE...
I agree with you both... these things always look better in groups...
Take care my friend...All the best.....Andy
Another fun project Andy! I went out to the shop and made a pair right after I watched this. (My mail lady appropriated them within the hour. )
Thank you!
Hi Matt...
I'm glad that you liked them...
Haha... you must have made a great Job of making yours.. well done...
Take care my friend and all the best from Andy
Hi Andy I was wondering if you could advise me a friend has asked me to make a vase for his wifes grave I made a vase of sorts then was advised by a friend that if water and flowers were put in it it would rot what should i do to solve the issue?
@singe1978 Hi Singe...
If you could find a glass or plastic container that fits inside the vase ...
Or you could coat the inside with an epoxy resin, which would be waterproof ...
Take care my friend and all the best from Andy
Cute little fish. Great decor for the fridge.
Hi Judith...
Thank you very much...
I also thought about making a smaller one as a pendant...
Take care my friend...All the best.....Andy
Great job the fish look amazing enjoyed the video thanks for sharing
Hi KE4YAL...
Thank you so much for your kind words...
Take care my friend...All the best.....Andy
Hey Andy those will make great fridge magnets,glad no injuries happened take care my friend.
Hi David...
I'm glad that you liked them... yes I agree...
The wire incident was a bit scary...
Take care my friend...All the best.....Andy
One more critter for the wood zoo! Thank you.
Hi Valerie...
Haha... yes.. there are a lot of critters in my cupboard now...
Take care my friend...All the best.....Andy
Nice work Andy! Thanks for sharing! Take care and GOD BLESS 🙏!
Hi Stephen...
Thank you very much... my pleasure...
God bless you and yours...
Take care my friend...All the best.....Andy
Very nice fish. You do very good lathe work Andy. Glad you didn’t get hurt
Hi Denver...
Thank you very much for your kind words...
The wire was a bit scary...it happened so quickly...
Take care my friend...All the best.....Andy
Fun to watch video, Andy! Well, until the wire whoopsie! So glad you weren't hurt but it must have scared you a bit. It would have me! Loved the fish, great job! 😀
Phil
Hi Phil...
I'm glad that you enjoyed the video and liked the little fish...
Yes.. the wire whoopsie... it was scary just how quickly it happened...
I should have removed the toolrest and I will make a new wire burner with a shorter wire for small pieces..
Take care my friend...All the best.....Andy
Great Idea Andy ! Well done.
New sub here! Fantastic creations Andy. I cannot help but see cartoon bombs! 😆. Thanks for sharing.
Hi Rich...
Thank you for your subscription and for your kind words...
Haha... I didn't think of it until you pointed it out 🤣
My pleasure...
Take care my friend...All the best.....Andy
Great little fish Andy 😁
Hi Neil...
Thank you so much 😉
Take care my friend...All the best.....Andy
Andy, I love your little projects, defo going to try this one. Still loving the chickens, keep it up mate.
Hi Garry...
I'm glad that you are enjoying my little projects...
I hope that you will enjoy making yours... Haha... the Chickens are great fun...
Take care my friend...All the best.....Andy
Missed this one only seen today great job Andy
Hi Daemon...
I'm glad that you found it and enjoyed it...
Take care my friend...All the best.....Andy
Hi Andy was great to meet you last week just watched your video of turning the fish fridge magnets great idea and great video
Hi Chris...
It was lovely to meet you all too... it was a bit of a surprise to be recognised in a pub... Haha.. small world we live in now...
I hope that you and your good lady are well and that your friend had a lovely holiday and a safe journey home...
I'm glad that you liked the little fish family.. these are great fun to make...
Thanks for the comment.. I've been keeping an eye open for it...
Take care my friend...All the best.....Andy
That’s a good idea. A paper joint might work too. How about a dowel glued in for an eye? Think I might have a go one day. Cheers Andy, Take it easy chap. Lee 🤓
Hi Lee...
Yes.. I agree... paper and glue or double sided tape would also work...
Next time I will include an eye... I may make a stripey one too..
I hope that you will give it a go...
Take care my friend...All the best.....Andy
I loved that fish. Great make.
Hi Yullya...
Thank you so much...
Take care my friend...All the best.....Andy
Beautiful fish Andy.
Hi Jack...
Thank you so much...
Take care my friend...All the best.....Andy
Sweet! An animal turning I can really like. Gluing the pieces is easier with plain yellow glue and a brown paper bag center in the sandwich. Not necessary to flood the joint, just a thin coat on both. After turning, just apply some water along the seam, the paper will give up and all you need do is sand on a belt or disk.
Hi Lewis...
Yes.. I totally agree with you... that is a great way to hold two pieces together temporarily...
Take care my friend...All the best.....Andy
Dry nice project thank you Andy 👍
Hi the old boys shed...
Thank you very much.. I'm glad that you liked it...
Take care my friend...All the best.....Andy
loved the fish, creative idea.
Hi Wayne...
Thank you so much... I'm glad that you liked it...
Take care my friend...All the best.....Andy
Great Andy! They are beautiful!!!
Hi Mauro ...
Thank you so much... I'm glad that you liked them...
Take care my friend...All the best.....Andy
Nice one Andy, no fishy jokes here! Yeah, scares me when I see people holding the wires by hand. All the best, Dave
Hi Dave...
Haha... that's good...
The wire catch happened so fast... frightening...
Take care my friend...All the best.....Andy
Again, a really nice design. Thank you for sharing. Always loving seeing the creatures coming from your workshop
Hi John...
Thank you... my pleasure...
Haha... I'm glad that you are still enjoying my little creatures...
Take care my friend...All the best.....Andy
Very cooool fishes Andy and glad you ok! 😃
Hi Val...
I'm glad that you liked them...
Yes.. ok thanks... these things happen so fast...
Take care my friend...All the best.....Andy
They are gorgeous Andy and I think would sell really well at craft markets.
I'm glad you weren't hurt by the wire but it is really good to see that accidents can happen at times so thank you for showing that bit.
Take care my friend and speak soon.
Cheers, Huw
Hi Huw...
Thank you... yes.. I think that they would sell quite well...
The wire incident did surprise me a bit...good job that I wasn't holding on too tight...
Take care my friend...All the best.....Andy
Nice one Andy, lucky not to loose a bit of something at the end matey 😮
Hi Jim...
Thank you very much...
Yes... it happened so quickly... scary how dangerous it can be...
Take care my friend...All the best.....Andy
It wouldn't be too different to make a really cute rocket with 4 small fins instead of two with the fish
The wife has just ordered a wall full for the bathroom ! Thanks Andy
Hi Ron...
Haha... sorry about that... but I'm glad that your wife likes them...
Happy wife.. happy life ...👍👍
Take care my friend...All the best.....Andy
Great job, Andy. You're always entertaining and instructive.
Hi Mel...
Thank you as always for your kind words...
Take care my friend...All the best.....Andy
Thanks Andy! We have a cabin theme at home here, so I'm sure I'll be turning some fish! To me, this is more fun than fishing anyway!
Hi Ray...
Ooh that sounds great... perhaps you could upscale them... pardon the pun... Haha..
Yes... definitely more fun than fishing...
Take care my friend...All the best.....Andy
Those are cool, Andy!
Hi Billy...
I'm glad that you liked them and thank you as always for watching...
Take care my friend...All the best.....Andy
Hi Andy how are you? The fish are really cool I throughly enjoyed this video but then I enjoy all of your videos. I like how you explain has you go along. Amanda xx
Hi Amanda...
I'm ok thank you... I hope that you and yours are all well...
I'm glad that you liked the little fish and that you are still enjoying my videos...
Thank you as always for your very kind words...
Take care my friend...All the best.....Andy xx
I like this
Thank you
Hi Ed...
I'm glad that you liked it....
My pleasure...
Take care my friend...All the best.....Andy
Those are nice, Andy. A two-fer. If someone was creative (not me), they could easily put an eye and a mouth on those things. Looks like you've gone from land animals to the water kingdom (lol).
Bill
Hi William...
Thank you very much...
Haha... who doesn't like a two-fer...
Eyes and a mouth would have been good...
Also Jude suggested stripes in the wood which would have looked good...
Perhaps I could make a pair with both...
Don't forget that the Bee was an air insect so all things covered... Haha..
Take care my friend...All the best.....Andy
Sufferin' duck, that wire getting stuck was very frightening, certainly taught me a lesson. Cheers Andy, a very enjoyable vid and I'm mighty glad you've got all ten fingers after that one.
Hi Mark...
Thank you for your concern...
Things like that happen so fast... looking at the video I realised that I should have moved the toolrest out of the way.. I will try to take more care in future...
Take care my friend...All the best.....Andy
Nice fish Andy! I think Padauk is Latin for “Nasty orange dust everywhere” 😂
Hi Todd...
Thank you very much...
Haha... yes.. Padouk dust always makes me think about a crime scene...🤪
Take care my friend...All the best.....Andy
Yup... If you work with a lathe sooner or later you are reminded that these machines are always a danger to us.
For me it was an unbuttoned sleeve that gave me a good reminder of why clothing and especially hair must be held back with restraints.
I too was lucky with only a torn cuff.
Hi Kieth...
Yes.. I completely agree with you...
Oh dear... that could have been bad.. I'm relieved that it was only a torn sleeve...
I get a few comments about my sleeves when I forget to pull them back but I do try to remember..
The wire incident was a bit scary.. it happened so quickly...
Take care my friend...All the best.....Andy
Hello Andy bravo belle création original et bien réalisé bravo 👍👏
Hi Denis...
Je suis content que ça te plaise... merci boucoup...
Take care my friend...All the best.....Andy
Merci Andy 👍
Good stuff Andy
Hi Russ...
Thank you very much...
Take care my friend...All the best.....Andy
Holy Mackerel 😮
Glad to see you didn’t lose any digits.
Adorable little fishes.
Yes, that's much too big a price to pay for fish fingers.
Hi Normagene...
Holy mackerel... Haha.. I see what you did there...
All digits intact thank you...
I'm glad that you liked them...
Take care my friend...All the best.....Andy
Very neat
Hi Chris...
Thank you very much...
Take care my friend...All the best.....Andy
Very cool I like it
Hi Donald...
Thank you very much.. I'm glad that you liked them...
Take care my friend...All the best.....Andy
Another unique turning, Andy. Such a great idea! Glad you didn't get hurt, things can happen quickly! Stay warm and dry!
Hi Mike...
Thank you very much...
Yes .. the wire wrapping around the piece was quite scary and a reminder to take more care...
Take care my friend...All the best.....Andy
Yet another fantastic video Andy to add to your animal collection & other bits & bobs u’ve created 👍
Hi Wayne...
Thank you so much..
I'm glad that you enjoyed the video...
Take care my friend...All the best.....Andy
Great little project Andy ,thanks for sharing that little mishap it makes you more aware of what actually can go wrong and I will be mindful of that now.
All the best to you.
Regards Jim
Hi Jim...
Thank you.. I'm glad that you liked it...
Yes... it happened so quickly.. it's scary to think of what could have happened...
Take care my friend...All the best.....Andy
Love the fish and how you made them. Glad you didn't get hurt with the wire. Great job.
Hi Dennis...
I'm glad that you liked them...
That wire was a bit scary.. it happened so quickly...
Take care my friend...All the best.....Andy
Fun project Enjoyed the video Andy! Very nice looking fridge magnets, that was pretty scary how that burn wire did that, thanks for sharing that, I sometimes use them and I will keep that on my thoughts to be careful with them, Take care buddy 🤝
Nice project Andy, one I actually might make. Thanks for sharing! Glad you didn't get hurt when the wire got snagged !
Stuart
Hi Stuart...
Thank you very much...
I hope that you do make one of these little fish..
I would love to see a picture...
Yes the wire incident was a bit scary... it happened so quickly... a little more care in future...
Take care my friend...All the best.....Andy
Hi Andy. Great project. Beautiful little fish. Take care. 😊😊
Hi Rob...
Thank you... I'm glad that you liked them...😉
Take care my friend...All the best.....Andy
Going to make some soon
Hi William...
Great to hear...
When I did these I was short on time so I hot glued them...
But I would recommend using wood glue with brown paper in the middle to stick them together...
Take care my friend...All the best.....Andy
Another nice one Andy! Clever way to get the tail shape. Too right about the wire! Loosely held handles let you get out of the way……..just in case! Very happy that you weren’t injured. Cheers, Rick
Hi Rick...
Thank you... I'm glad that you liked it...
Yes... that wire catch really did surprise me...
I should have moved the toolrest out of the way as well...
Me too... thank you...
Take care my friend...All the best.....Andy
Very nice project Andy 😃 And effective technique for making two pieces without wasting any wood 👍 a bit scary at the end I have to admit 😬
Hi Nordic turning...
Thank you very much...
Yes... 2 for 1... always good...
That wire wrapping around was very scary... it happened so quickly...
Take care my friend...All the best.....Andy
Nicely done Andy. I can see these being big sellers at a craft fair.
Hi Doug...
Thank you...
Yes.. I agree with you... perhaps smaller ones made into pendants as well...
Take care my friend...All the best.....Andy
Hey Andy, got a drum sander for Xmas? Very handy indeed 😎👍🏻 Great little fish family, mystery of the fish note solved 🤓 Ha ha… You could make these in all shapes and colours, even glue rings of different wood together and make a bunch of zebra fish, maybe add an eye or drill a hole in place of the eye so you could save the wire stunt 🤪 Glad you did not get hurt there 🫣 Lovely idea and insightful video as always 👏🏻 Thank you and have a great week in a what sounds like a fairly dry but cold Cornwall 👋🏻😉👋🏻 Byeee, Jude
Hi Jude...
Haha... a drum sander for a Christmas present.. well I've heard everything... Haha...
You must be building quite a tool collection now...
I would suggest a lathe next.. just a small one... good .. that's settled then...
I'm glad that you liked the little fish family... they are fun to make...
I love your idea for making Zebra fish... they were my favourite tropical fish when I was younger...
The wire was a close call ... a reminder to be more safety conscious...
Mild and very dull here...
I hope that you are having better weather over there.. I'm thinking warm sunshine and a little snow...
Have a lovely week Jude...
Take care my friend...All the best.....Andy 👋😉👋
@@AndysCornishCreations It is bloody freezing cold here, Andy, cold enough to freeze off any protruding body parts 🤪🥶⛄️I am putting a snowman here because there is no emoji for the particular part I am referring to 🙄😉 You get the idea 😂 There is snow from two weeks ago, so this means more light, but no new snow, too cold for that right now 🥶 The little stripey ones are my favourite tropical fish too 🐠👍🏻☺️ Have a great week, Andy, be safe 🙏🏻👋🏻😉👋🏻
So... just to clarify... it's a bit chilly...🤣🤣
@@AndysCornishCreations Right, bloody chilly 🥶
👍
Hi Richard...
Thank you 👍👍
Take care my friend...All the best.....Andy
I have done very similar with Woodglut designs.
Hi Aleida...
I hope that you enjoyed making yours... I did...
Take care my friend...All the best.....Andy
They're beautiful little fish! What fun to have a school of them on a refrigerator.
Whew! Glad there were no injuries associated with the wire mishap! Events like that happen so quickly, all the more reason to take precautions. It looks like you and the fish came through just fine.
Thank you for sharing the continued growth of your menagerie! It's always a delight! 🐠💕
Hi Gwynn...
I'm glad that you liked them... yes.. I must fit some magnets on them...
As you say.. things happen so quickly.. it really surprised me... it's not happened before...
Thank you as always for your kind words...
Take care my friend...All the best.....Andy
1st Boom !!!
No surprise there, Huw.
Bill
@@williamellis8993 🤣🤣😁😁
Haha...
Thanks for your fish ideas. The attached is an extension of your idea but giving both slimline and articulation to the fish. czcams.com/video/eaprhGMHlU4/video.html
Hi displacement activity...
My pleasure...
I watched it with great interest... awesome idea...
Liked and subscribed...
Take care my friend...All the best.....Andy