DIY: Make bow of Green Arrow superhero from Bicycle wheel, PVC, leaf spring, homemade Oneida bow
Vložit
- čas přidán 7. 09. 2024
- We can make bows out of many type of materials and tools at low cost. Building one bow from an old bicycle wheel can be as cool as bow made form PVC pipe especially when it can function as a normal bow or even can do bow fishing with it. I build this bow with the inspiration from the Green Arrow bow, or Oneida compound bow. I will later add cams to turn it into a compound bow. After several test shot at the target, i think one day I should use it to do bow fishing a long with my crossbow. In this video, i used two strips of leaf spring that I cut previously. The draw weight is 80lbs at 28 inches. In my previous video, I built a similar bow using four coil springs making the bow strong enough to shoot small games or do bow fishing. And I also show how I made the arrow rest from a PVC pipe.
I am sorry that there's no available template. I was just try to improvise and use what i had to build the bow, so didn't draw a plan. But I can provide you the following measurement : the riser part is 30cm long, each level part is 24cm, each limb is 36cm, the string is 93cm. I hope this help. :)
In my previous video I show a bow that I made out of a Leaf Spring that I found an old leaf spring at the local salvage yard. It was a good bow and more powerful than this bow. Please check it out in this link : • Assemble and shoot my ...
Please also check out my similar bow making project :
Bow made from bicycle wheel, arrow rest made from PVC pipe :
• Bow made from bicycle ...
The followings are related videos :
Home made pistol crossbow part 2 - prods made from shovel not PVC, good for survival : • Home made pistol cross...
How to build Mini Medieval crossbow, Rose Wood stock, prod made from blade of table plane not PVC : • How to build Mini Medi...
DIY, home-made crossbow bolts or arrows, an easy way to make dowels for crossbow bolts and arrows : • DIY, home-made crossbo...
Music: Summer - Bensound
www.bensound.com
Support by RFM - NCM: bit.ly/2xGHypM
Music: Sunset On Terra by HYBRID V is licensed under a Creative Commons License.
creativecommon...
Support by RFM - NCM: bit.ly/2xGHypM
Music: Memories - Bensound
www.bensound.com
Support by RFM - NCM: bit.ly/2xGHypM
Wir können Bögen aus vielen Arten von Materialien und Werkzeugen kostengünstig herstellen. Einen Bogen aus einem alten Fahrradrad zu bauen kann so cool sein wie ein Bogen aus PVC-Rohr, besonders wenn er als normaler Bogen fungieren oder sogar Bogenfischen damit betreiben kann. Ich baue diesen Bogen mit der Inspiration vom Green Arrow Bogen oder Oneida Compoundbogen. Ich werde später Cams hinzufügen, um daraus einen Compoundbogen zu machen. Nach mehreren Probeschüssen auf das Ziel, denke ich, dass ich es eines Tages zum Bogenfischen mit meiner Armbrust verwenden sollte. In diesem Video habe ich zwei Blattfederstreifen verwendet, die ich zuvor geschnitten habe. Das Zuggewicht beträgt 80 lbs bei 28 Zoll. In meinem vorherigen Video habe ich einen ähnlichen Bogen mit vier Schraubenfedern gebaut, die den Bogen stark genug machen, um kleine Spiele zu schießen oder Bogenfischen zu betreiben. Und ich zeige auch, wie ich die Pfeilauflage aus einem PVC-Rohr gemacht habe.
Es tut mir leid, dass keine Vorlage verfügbar ist. Ich habe nur versucht zu improvisieren und zu verwenden, was ich hatte, um den Bogen zu bauen, also habe ich keinen Plan gezeichnet. Aber ich kann Ihnen das folgende Maß zur Verfügung stellen: der Riser-Teil ist 30 cm lang, jeder Level-Teil ist 24 cm lang, jedes Glied ist 36 cm lang, die Schnur ist 93 cm lang. Ich hoffe das hilft. :)
In meinem vorherigen Video zeige ich einen Bogen, den ich aus einer Blattfeder gemacht habe, die ich auf dem örtlichen Schrottplatz einer alten Blattfeder gefunden habe. Es war ein guter Bogen und stärker als dieser Bogen. Bitte schau es dir unter diesem Link an: • Assemble and shoot my ...
Awesome work
Thanks 😊
You Have Not Failed This City!
Not yet fail, brother Spider Man
I have wanted to make this bow for the last 4 years. Now, this video appeared in front of me. What a treasure. Thank you for laying out a foundation & idea of how to make it. I am going to make this bow this week. I'll be using a normal aluminium tube instead of the leaf spring and I will use spring in place of the two strings. Hope it turns out fine. Wish me luck!
Thanks HARDIK for your comment. I am exited to know that this video is useful to you. There are so many way to make bow. It would be great if you can show us the bow you are making in a video. I really want to see it. I wish you all the best.
İki uç kısma 2 tane makara takarsan daha guclu olur diye dusunuyorum.
If you are successful in making it and if it comes out Strong, will you maybe make one if someone else wants one? For people that can't make one (meaning people that can't do that kind of work)?
Matches that of Oliver Queen from the Green Arrow! Love your work!
Thanks brother. I am glad you like it.
Incredible!!! Kudos to you. What a marvel of engineering and persistence to complete this fine bow!!!
Thanks 😊
Don't know if I am going to make it or not, but it was good to watch your video while I was eating
For a bow with such a short draw its got some serious power. Itd be really good for hunting at far range
Thanks everyone for watching, thanks for the thumb up and subscriptions 😍
Went through a coconut good enough. good job young man
Thanks brother.
Ive watched many bike wheel bows and this is the best looking one. I would love to have one tok
The best designs and plans are available on the Wood Prix website.
Thanks for sharing about your website.
Super boulot merci beaucoup pour la vidéo 📼 c'est très intéressant
That is awesome very nice Greenarrow bow .you did a great job making it .
Thanks brother, I am glad that you enjoy it 🙂
Very good work looks like green goblin bow.
Thanks for your kind comments :)
Green goblin has a bow? lol what😂
@@mahirbaksh8712 Okay Mr know it all🤣
if i only had a workshop like this. i just made a bow from hasel wood. but yours is much more poweful
Thanks bro. In tropical region, unlike in the west, we don’t have a large variety of wood to use to make bow. I wish u all the best with your future bow making 😊
@@backyard.craftsman thank you! I Just found out you can make a bow from the wooden things (slats?) that hold your mattress in your bed. Dont know the Englisch Term ;-).
I dont know why I am seeing this but very nice work bro!
I appreciate that! Glad you enjoyed it 🤩
You did an excellent job! Well done.
Thanks for your kind comment.
This is awesome I would like to try to make this when I get the tools as this looks pretty cool
Thanks, I believe you can do it when you have the tools you need :)
Do you have the measurements of the bow and do you know how to know how much force it has?
@@backyard.craftsman
Love this
Thanks 😊
@@backyard.craftsman you are welcome
Nice bow👍
Thanks 👍
Um trabalho enorme, depois você compara com uma feita com um galho e ver que perde de lavada na distancia e precisão kkk
Magnífico impressionante
Thanks for your kind comments :)
You did a great job buddy. Keep up the good work
Thanks 👍
Show. Parabéns ficou ótimo e muito potentes.
Obrigado irmão pelo seu comentário. Estou feliz que você goste.
Sensacional parabéns camarada...... like
Obrigado irmão por assistir
Parabens muito bom trabalho.
Obrigado pelo seu comentário gentil.
wow!
Damn looks good I wud love to have one myself 🤩
Thanks Tom, Glad you enjoyed it 🤩
Nota 1000 pelo trabalho 👏👏👍👍
Obrigado senhor :)
Amazing 👍👍
Glad you enjoyed it 🤩
Good job
Thanks for watching and comments :)
You are genius
Good job, but I think I’ll just go buy a real Oneida bow
Thanks bro, some people wanted to pay me to build one for them, and I also gave them the link to the Oneida bow website. One day, I ll order a real one too. but it's fun to make and shoot this one. :)
You can get older Oneida bored on ebay pretty inexpensively
@@backyard.craftsman never stop creating when the store and cash is all gone you will have the skills to build weapons and hunting gear. Guys will call you the weapons master and seek you out to trade with. I enjoy your work.
@@stingfragile5717 Are you so delusional you really think that would happen lol
@@jacobferdinand7666 I think it has already happened in other countries not to hard to see it happening in the US. The cost of everything it pricing people out of food, shelter and it's not getting easier. Delusional or not shit happens all the time in nature like earthquakes, tsunami,and floods if you don't think any of this has never effected people then maybe it's you that is delusional Jacob
Awesome!
Thanks brother :)
Brilliant, now make a slingshot from scraps :D
Thanks for your comment. You might want to watch my another video.
czcams.com/video/f5v9O7_BmzU/video.html
@@backyard.craftsman Will certainly do :)
80Lbs may be fake but that looks nice while best part is it's size . Easy to handle
A esa distancia yo arrojó la flecha con la mano y no requiero un arco
U re very skilled with your hands
REALLY AWESOME. only the first strings that you tie on to the bow. not he arrow firing string. should have tied the knots on the inside of the wheel parts instead of outside for all to see
and it's not exactly 80 lbs. but it's still fucking awesome!
Thanks for the comment, thanks for letting me learn from you :)
Great idea for bow but in my opinion painted wood as a handle makes your hands dirty I guess. It wouldn’t be better to use flame thrower and later on paint it with transparent spray paint? I don’t know 🤷♂️ just wondering
Why do the arrows come out so slowly?
80lbs should be allot faster.
That functionality is like a 25-30lbs traditional bow.
Maybe all the additional weight is the the Enemy of speed
Does it also gives the let-off result compared to recurve bow?
It’s not as good as recurve bow at the same draw weight but it’s fun to use 😀
Did he just use white craft paste to glue the boatds together?
It’s wood glue.
Hi, @Backyard Craftsman. The size details that you gave, have you given the displacement from end to end, or actual length throughout the curvature? Please clarify. Thanks!
Hi Kardik, thanks for the question. sorry that it's hard to be more detail in English and there are many terminologies that I don't know.
What type of band was used on the lever part? I’m making something similar but cannot think of something thin enough but also elastic
Thank for watching and comment. I used vehicle leaf spring buy cutting and grinding them small enough for the bow. I did recorded how I made it, but unfortunately the footage was lost. But there are an easier alternative. In my other video, I made the prod of my medieval crossbow from an old blade of a table planer. It's thin enough, no need much effort for grinding and only need some cutting. You might want to find out in this link: czcams.com/video/TjtA7U6rJEY/video.html
Try an extension spring
@@nateb4543Thanks for the comment. It's a good idea. I have used some extension spring before in my previous bow made from bicycle wheels. They are not as strong as leaf spring, but we can use it to make good and functional bow. If you haven't seen my other video yet, pls follow this link: czcams.com/video/PgwCofrNiFM/video.html
next time you should be more specific and make a list of needed materials please i am really struggling over here because i dont know what types of metal some parts need to be or what kind of string you used. maybe tell me right now please i have cut all the parts except for the leaf spring parts.
I am sorry that there's no available template. I was just try to improvise and use what i had to build the bow, so didn't draw a plan. But I can provide you the following measurement : the riser part is 30cm long, each level part is 24cm, each limb is 36cm, the string is 93cm. as for the leafspring part, i made another video to show how I made it thinner. Pls follow this link. czcams.com/video/GrmM1HdygE8/video.html and skip to 4:00 if you don't want to watch the whole video. I hope this help.
@@backyard.craftsman what material is the string made of ? thats the last thing i will need to know. and thank ylu very much for answering me that fast i appreciate your help. i was fascinated by your bow because it looks the best out of all the videos i saw
@@zetsuron_g4 thanks bro for liking my bow. I bought the The string from Geologic bow store in my country. You can also order it online. I tied it to the Paracord at both end. You can also use just paracord. The reason I used the string from Geologic bow only because it fit the arrows from the same company.
@@backyard.craftsman thanks man with that i shall be able to finish the bow soon thank you very much
Belo projeto, ficou top.
Obrigado irmão por assistir e incentivar comentários.
Looks like the oneida bow
It's my main inspiration. Hope one day, I can shoot the real one.
I also shoot with a bow but my draw strength is usually 100 lbs
That's a very cool lever bow you have great skill. Although are the bike rims really strong enough, would they bend over time and that looked pretty easy to pull for an 80lb bow ?
Thanks Dave for the comment, the lever mechanism that I am using in this bow certainly make them strong enough to pull 80lb. I have been using the bow for a while and haven't notice any bent yet. But I do hope that i ll last very long.
For future easiest way to test draw weight is just with a luggage scale
@@adamwally3427 80 lbs from a panties elastic 13:35, 14:09 xD! tension without trigger or zekier. Steel fingers xD!
Great video and excellent work on the bow, have you added cams to it yet?
Cheers
Thanks :)
Bad azz!
Thank Mathew :)
Dang 80 pull, i can only pull 45-50 for now 😂
О чем Вы говорите, какие 80... У него тетива болтается, видно же. Ребёнок растянет. А Вам мое уважение за такое полезное и интересное увлечение, как стрельба из лука 👍
Great job!!! can you share plans to make wood grip plz?
Thanks brother I am sorry it's not available.
got any plans, templates, blueprints etc etc you can share??? I'd love to machine one out on my cnc machine?
sorry brother I wish i had them. But only this spec : the riser part is 30cm long, each level part is 24cm, each limb is 36cm, the string is 93cm. I hope this help. :)
Nice!
Thanks :)
nice
Thanks 😊
Szia, milyen méterig jó?
Keren
Keren?
What it's the materials list needed for you maker
Thanks brother for your comment. I can provide you the following measurement : the riser part is 30cm long, each level part is 24cm(leafspring and PVC), each limb is 36cm, the string is 93cm. I hope this help. :)
I do not suppose you are in the UK and willing to make another one by any chance?
Thanks for watching, it's really encouraging. I am glad that you like it :)
hear a question what are the measurements of each part because you did not put them in the video
I am sorry that there's no available template. I was just try to improvise and use what i had to build the bow, so didn't draw a plan. But I can provide you the following measurement : the riser part is 30cm long, each level part is 24cm, each limb is 36cm, the string is 93cm. I hope this help. :)
@@backyard.craftsman thanks if you helped me
Da hora
Thanks brother, I am glad you like it. :)
Wow verry nice bow can you make it for order 😁
Thank brother for liking it. I am sorry i can't make more of it. I would encourage you to buy the Onedia Eagle bow which inspired my designed.
Increíble arco! Tendrás el molde del mango de madera?
Obrigado irmão por assistir. Lamento não ter um modelo para a alça.
Amazing job man . Very well build .
Thanks 😊
Hi 👋🏻
This is lb...???
Obrigado irmão, espero que este vídeo seja útil para você e desejo-lhe tudo de bom
Can we use it for hunting 🤔
Sure, we can as long as it's not illegal to hunt.
13:55 where is the spring? I don't understand how it works
Thank brother for the question. I springs were inserted into PVC pipe which were flattened.
This bow is NOT 80#’s. On a compound bow, there’s no way a 80# bow could be drawn and aimed without the cams kicking over for relief. But this isn’t a compound bow, thus there’s no relief at full draw. Admittedly, the bow is cool, but saying it’s 80# is false advertisement.
Just curious, how much would charge to get one made for a customer?
Sorry brother, I just made bows as a hobby. But you can buy real Oneida bows on ebay. I've heard that it's no longer as expansive as before.
@@backyard.craftsman Oh, ok. Thanks
I want this show me the price of this bow
Where did get such thin leaf spring from?
Thanks Nandu for the question. It took me lots of time and effort to cut and grind it into this small and thin. I initially planned to use them as my pistol crossbow prods but they are too strong so I decided to use it in this bow construction with the lever mechanism instead.
How is this bow compared to compound bows?
thank for the question, it's not as practical as a compound bows, but at least it can shoot. and it's fun project to build. :)
How heavy is this thing? Not draw weight, actual physical weight? Nice work btw
Thanks for the question. it's light, 0.7 kg only.
👌👍
Thanks for the comment, thanks for watching :)
What are the dimensions of the items you used?
If that was 80lbs of draw weight it would not stick into a coconut like that. It would blow through it and the cardboard box behind it. This is NOT a lever bow but it looks like one. You need metal cables to get 55 lbs of draw weight on real lever bows and you need a wheel in the operations to get over that much weight. There is 0 chance this bow draws 80 lbs.
There’s no way a 100lbs bow can make arrow exit the coconut, let alone a 80lbs bow. The older the coco is the harder to make arrow go deeper. Maybe you are living in the west and never seen someone shoot a coconut before. Or maybe you have shot a very young fruit but this is no watermelon 🍉 .
I'm gonna have to agree with you it doesn't look like he's pulling 80 pounds shooting from the cheek like this. I got a 64 pound longbow made out of Osage orange and I know what it feels like to shoot that from the cheek and it's 6 feet long he just doesn't look like he's struggling at all pulling 80 pounds with limbs that short and no cams I don't buy it.
What kind of thread u use ?
Thanks for the question. I bought the string made by Geologic at local Decathlon shop. You might want to refer to this link : www.geologic-precision.co.uk/fast-flight-archery-bowstring-id_8390042
Pretty sure onieda made this bow 20 yrs ago 🤷🏻♂️
Oneida and the Green Arrow character are my inspiration in building this one. Thanks for watching and commenting :)
@@backyard.craftsman I wish I still had mine. One of the quietest bows I ever hunted with… I wish they’d bring out a new model of it…
how to make the arrow
Thanks brother for the request, previously I made a video on how to make crossbow arrow. I would use similar way to make the arrows for the bow later. You might want to take a look at the video in this link: czcams.com/video/j1aVITikxQw/video.html
What is the punching machine called
Thanks for the question. But I am sorry that I don't understand your question. Can you please show me which minutes in the video that you see the machine?
May I have some cut measurements of the bike rim? I'm planning to make my own but I'm not sure of the measurements
Thanks Carlo for the question. Sorry for taking it long to reply. I can give you the following measurement : The riser part is 30cm long, each level part is 24cm, each limb is 36cm, the string is 93cm. I hope this help. :)
👍👍👍👍👍👏👏👏10
Thank Arlene 🙂
Cuántas libras??
Gracias por la pregunta Son 80 libras
how much weight is this bow ?
It's 80lbs, most people don't believe it, i shot an 80lbs bow before, so I trust the scale when I weight it. It doesn't perform as good as other bows with 80lbs, but it's fun to build and shoot one :)
How much lbs?
How is that 80 pounds? That has to be 50 or less
So how much for a green arrow bow?
Thanks for liking my bow. Sorry brother, I just made bows as a hobby. But you can buy real Oneida bows on ebay. I've heard that it's no longer as expansive as it used to be.
I want this can you made this for me please please please
I wish I have time to make one for you :) i made this bow only during short free time :)
can you give me a tamplate for all parts?
I am sorry that there's no available template. I was just try to improvise and use what i had to build the bow, so didn't draw a plan. But I can provide you the following measurement : the riser part is 30cm long, each level part is 24cm, each limb is 36cm, the string is 93cm. I hope this help. :)
Nothing like a little archery with a mask on. 😂 🤡
Looks kinda silly doesnt it? 😂
Thanks guy for watching and commenting
What would it take for you to make me one and sell it to me?
Sorry brother, I just made bows as a hobby. But you can buy real Oneida bows on ebay. I've heard that it's no longer as expansive as before.
Would you sell them?
I would encourage you to buy the Oneida bow which inspired my designed. I am sorry that I made this one only as a hobby.
That’s an Ork bow
how to oerder
Thanks for liking it. I would encourage you to buy Oneida bow which inspire my design of this bow. :)
Cjena luka LP
Thanks brother for watching :)
Down vote because of face diper.
It keep me safe from people not covid
Hmm not compound and not 80lbs
templates and list material plz
I am sorry that there's no available template. I was just try to improvise and use what i had to build the bow, so didn't draw a plan. But I can provide you the following measurement : the riser part is 30cm long, each level part is 24cm, each limb is 36cm, the string is 93cm. I hope this help. :)