A helpful tip, loosen up all gland head bolts first by 1/4 inch have operater push down on controls quickly, it will pop open head from piston, no need to hammer apart.also that machine needs stops welded up for tilt cyl, thats why piston did not just slide off, its bottoming out in cylinder. Should have stops welded to prevent from bottoming all the way out.(each way out,in)
The children should be in school, not working in appalling conditions. They are constantly exposed to dangers, wearing sandals instead of work shoes,they are applying solvents with bare hands, they can be crippled at any moment by the heavy machinery moving around them.
This happen with this children due to poverty, the owner of the repear shop is in some part a son of a gun, because he keeps all the money for him, the same happen here in Mexico
@@jesuscastro9463 I realize that under the system as it is, the children either work or go hungry. If they have no educational opportunities provided by the state and their parents cannot afford to give them education, children are forced to work at an early age. UN convention No. 138 provides that the minimum age for admission to employment shall not be less than the age of completion of compulsory schooling. The ILO's adoption of Convention No. 182 in 1999 consolidated the global consensus on child labour elimination. I wonder what happens to these children as they grow up and start demanding adult wages. This is a race to the bottom - a ruthless exploitation of the innocents.
ciekawe kiedy te uszczelki zaczną przeciekać w związku z wszechobecnym piaskiem i pyłem. Obstawiam że po tygodniu. Przy montażu tłoka zamiast nasmarować uszczelki zaczęli walić młotkiem aż wejdą, gwarancja jakości.
You could retire as a rag salesman.. Sometimes it seems like you could dump a bunch of parts on one end of the street and walk around to the other end and they would have built a truck ready to go...
How can you work in the dirt, everything is thrown on the street. And since these people say they love their children, they have to work in this dirt that is carcinogenic. What makes sense
Good morning , i have a maximum rispect to these young worker that work in bad conditions, with very few atatchments and tools for repairs. I haven't rispect to their boss because is a total unskilled worker. is good only for words, but hasn't brain . I am an old service man, all days, from 40 years, i do same work, on large constructions machines. The young mechanics boss is a total unskilled mechanic ( and considered him a mechanic isn't correct ). Tks
A helpful tip, loosen up all gland head bolts first by 1/4 inch have operater push down on controls quickly, it will pop open head from piston, no need to hammer apart.also that machine needs stops welded up for tilt cyl, thats why piston did not just slide off, its bottoming out in cylinder. Should have stops welded to prevent from bottoming all the way out.(each way out,in)
Will have to do it all over again in 100hrs.
Lube the seals, use clean towels, use clean solvents.
Those steel toe flip flops are impressive
Great video! Hard working young men! Thanks for sharing! 👍
Я восхищаюсь как вы работаете ребята 👍✊️🇰🇿
You guys are priceless! ❤️🙏
Love the way you guys use things around you to aid in your work 😊
That young man 👨 wielding that sledge hammer with brute force .. Good Lad always looking to get involved.
love seeing how the rest of the world repairs their equipment. thanks for sharing.
Easy got to Cutting Edge Engineering channel.
This is what we call backyard fixing right here.
Great work
Put oil on new pison seals, alot easily to reassemble
Great great work !!! 👏👏👏💪💪💪
คือ ซ่อมเก่งแท้ มักเบื่ง วีดีโอ ซ่อมรีแพ เครื่องจักรกลหนัก
some lubricant applied to the seals before putting them in would increase the seals lifetime
And aid assembly
أليس هناك مكان آخر..لماذا تضعونه فوق الرمال. سيتعطل مجددا
ok whats with the extra sidewall on the front tires? ive seen this in other videos
Parabéns i muito profissional 🇦🇫👍👍👍
The children should be in school, not working in appalling conditions. They are constantly exposed to dangers, wearing sandals instead of work shoes,they are applying solvents with bare hands, they can be crippled at any moment by the heavy machinery moving around them.
This happen with this children due to poverty, the owner of the repear shop is in some part a son of a gun, because he keeps all the money for him, the same happen here in Mexico
@@jesuscastro9463 I realize that under the system as it is, the children either work or go hungry. If they have no educational opportunities provided by the state and their parents cannot afford to give them education, children are forced to work at an early age. UN convention No. 138 provides that the minimum age for admission to employment shall not be less than the age of completion of compulsory schooling. The ILO's adoption of Convention No. 182 in 1999 consolidated the global consensus on child labour elimination. I wonder what happens to these children as they grow up and start demanding adult wages. This is a race to the bottom - a ruthless exploitation of the innocents.
Ahhhh! Nothing says quality like forced child labour!
I would call them shoemakers do
n't even have very good shoes on 😂
It's spelled Loader.... also grease the seals to increase life 😝
Wow
❤❤❤
Passando o ofício para os mais jovens.
Молотком по штоку было шикарно!
대단하다
India 🔥🔥 zindabad ❤..😂
Самое главное это в песок положить
через неделю на переборку
ممتاز
Young wild
Świetna jest zrobiona ta robota drodzy koledzy pozdrawiam twórcę tego filmiku 👍👍👍👍
Proszę Pana, tutaj nie ma się czymś cieszyć. Przecież tutaj dzieci pracują w niebiezpiecznych warunkach, kiedy one powinne być w szkole.
ciekawe kiedy te uszczelki zaczną przeciekać w związku z wszechobecnym piaskiem i pyłem. Obstawiam że po tygodniu. Przy montażu tłoka zamiast nasmarować uszczelki zaczęli walić młotkiem aż wejdą, gwarancja jakości.
Grasso spinotti ogni 10 ore di lavoro !!
Bravi
Ma mettete scarpe con la punta di ferro !!!!!!!!!!!!!!!!!!!!
Голубой малыш кувалдой куячит долларов на 5
You could retire as a rag salesman..
Sometimes it seems like you could dump a bunch of parts on one end of the street and walk around to the other end and they would have built a truck ready to go...
МНОГО НАРУШЕНИЕ
خطأ استخدام المطرقة
Qual é o país?????
Pakistan
Bater c uma marreta num retentor 😅😅😅😅😂😂😂😂😂😂😂 🛢️🛢️🛢️🛢️🛢️
Шустро перебрали гидроцилиндр!
never made caterpıllar only repair
"How To Repaire Loder Cat 966D Hydraulic Jack Local WrokShop " - please check your writing... uhhhh - 🙂
How can you work in the dirt, everything is thrown on the street. And since these people say they love their children, they have to work in this dirt that is carcinogenic. What makes sense
Very Bad repparing
Good morning , i have a maximum rispect to these young worker that work in bad conditions, with very few atatchments and tools for repairs.
I haven't rispect to their boss because is a total unskilled worker. is good only for words, but hasn't brain .
I am an old service man, all days, from 40 years, i do same work, on large constructions machines.
The young mechanics boss is a total unskilled mechanic ( and considered him a mechanic isn't correct ).
Tks