MacBook Pro 15" 2019 A1990 Touchbar Touch Bar Bottom Cover Removal Disassembly
Vložit
- čas přidán 14. 05. 2020
- Disassembly Repair Fix Tutorial Teardown Guide If my videos helped you save money, please consider helping me continue to make these videos by sending me a little appreciation, even $1 would be greatly appreciated. Thanks! :)
Venmo:
"@BinhVu" Last 4 Digits if it Asks Are 6734
Zelle or PayPal (friends and family from a bank account so they don't charge any fees):
itsbinhrepaired@gmail.com
Patreon:
/ binhrepaired
Feel free to mail me your old electronics or parts you replaced during an upgrade.
Mail:
It's Binh Repaired
1288 N Hillview Dr.
Milpitas, CA 95035
Tesla referral link: www.tesla.com/referral/binh58522 - Jak na to + styl
This is the best video for this because it shows just how much effort is needed to get the case off. All the other videos I watched had been pre-disassembled so I was afraid of using too much force.
That's exactly what I don't get about other videos. Not only that, but they add a bunch of pointless blabber to the beginning and some pointless super long intros. They also speed stuff up and cut things out that are needed to figure out how to get it apart. Glad you appreciate the video. Don't forget to like and subscribe if you haven't already. It'll help me continue making these videos.
You are right Nick, I just did it Binh's way after watching other videos and it worked, thanks Binh Repaired.
@@markgable3087 glad it worked out
All I can say is thank god for this video. I went through god knows how many videos on how to open the back panel and none of them were useful at all. I'm glad you showed techniques cuz I was scared of being too forceful but turns out that was the key lol. thanks man
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm (God 👼) to recommend my channel. Thanks!
Thank you so much. The detail of how to position your fingers for leverage is *chefs kiss*
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
This one is actually one of my older videos. A suction cup or tape would make it easier to get underneath the cover initially. :)
Man you saved my life I appreciate your effort so much thank you
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Great video, very helpful. Thanks
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Thanks. I'll echo others who appreciate the clear warning about the process and the (patience testing) effort to open the case!
Haha sounds good
thank you! the only video that worked!!
Awesome, glad it worked! If you haven't already, please like and subscribe so others can find my videos. Thanks!
thanks brother, this helped a lot
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thank you , I could do it following your instructions!
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Thank you. You saved my day 🙂
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Thans you this was very helpful
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Best video by far of opening the mac, the only issue I had is putting it back together after cleaning the dust. Thank you very much!
Glad it helped! If you haven't already, please like and subscribe so others can find my videos. Thanks!
You're the best tysm!!!
Glad my video helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thank you !!
Glad it helped. If you haven't already, don't forget to like and subscribe so others can find my videos. Thanks!
Best video. Especially it shows the difficulty and the suggested hand positions to pull off the back cover with force.
:) Thanks!
Does the copper adhesive not need to be replaced? Also what size pentelope do you use?
Copper adhesive? This video will be better. czcams.com/video/YtrweQyRyIg/video.html
do you have video of how to put it back on?
The bottom cover? Every one of my MacBook Disassembly videos show that haha
The lid just slide forward just remove screws lift side where 4 screws are and push lid forward and will be removed in second
Doesn't come out easily.
I have a laptop of 2020 mac the touch bar one... will this work with that one
The disassembly process? It should be very similar, but not exactly the same.
@@ItsBinhRepaired ok
If I am putting the DDR3L ram it can change the speed of my laptop?
Not really
What kind of screwdriver is used? I can’t find anything small enough
This amzn.to/3xWKHSg
Hi can i ask something to you. I have macbook pro a1989 and there's something like a thin of Cooper sticking out from the left of my mac what is that? Is that ok to leave it like that? Thanks man
Make a CZcams video and send me the link
@@ItsBinhRepaired czcams.com/users/shorts7W6a9jyt3vY?feature=share
@@newbieplayer1787 open it up and check what it is. Don't just pull it out.
What can I do plz tell me about this laptop dell inspiron 15 3000
What do you need help with?
Can you make a video on how to attach the backplate cover
You didn't watch until the end?
@@ItsBinhRepaired I have 6 screws, 2 big, 2 medium, 2 small. And I don’t know which one goes where
@@lil-hawk3 longest back left and right corner. Medium back center, small front corners where it opens.
@@ItsBinhRepaired ye it’s all good now, cheers
@@lil-hawk3 great
how do i put it back in now😅
Lol watch the end of this one czcams.com/video/rwjcEGA-dr0/video.html
I can’t get my backplate back on... I don’t know what to do. I push on a slight angle, but it will not slide back on all the way.
Have to slide the back part on while pushing it down.
Aonde fica o Ssd ??
Integrated into the logicboard
I have a dell inspiron 15 (3000) but he have just like a zeroo speed and I want to increase its speed
SSD upgrade and at least 4gb ram is the way to go. czcams.com/video/4p5jFDzVwUw/video.html
It's Binh Repaired can we put DDR3L ram
@@knockknockwzb9681 you'll have to open it up and see what type of RAM it's currently using.
It's Binh Repaired I am scared to open I have no experience
the part after unclipping is impossible
Not impossible, just extremely difficult. Did you make sure the middle clips were undone as well?
Try the method used on this model.czcams.com/video/arKAzeWnqKY/video.html
@@ItsBinhRepaired yeah all the middle clips are undone, i’ll check out that link now ty! i have a 2017 pro with touchbar
@@aubrey5500 oh, you're watching the wrong video then lol
@@ItsBinhRepaired what would be the correct video? (if you have one)
Hello man plz help me
what did you need help with?
Hy tell me
What's wrong?
Cut my finger while opening. Stress.
Shame on apple.
D: