Video není dostupné.
Omlouváme se.
✓ How to connect two routers to Increase or Extend Home WiFi Range | WiFi Repeater WiFi Extender
Vložit
- čas přidán 11. 08. 2019
- How To Connect Two Routers together using Wired LAN Cable on one home network to increase or extend WiFi Signal Range.#WiFiRouters #LanCable #LocalGuyTech #ExtendWiFi #IncreaseWiFi
📺🔔 Don't Forget to Subscribe for more tech videos: czcams.com/users/LocalGuy?su...
🟢 Like and Share Videos With Friends: • ✓ How to connect two r...
🔵if you have a old router you can covert that old router as a WiFi Range Extender or Repeater.
Here I have two TPlink WiFi Routers:
1. TP Link W8968 (Root Router)
2. TP Link WR841n (Extender Router)
So in this Tutorial i am going to connect Two Router using Lan cable.
i will connect a LAN cable to provide a Link between Root Router and Extender Router.
🕙Timestamps for How to connect two routers to Increase or Extend Home WiFi Range | WiFi Repeater WiFi Extender is given below:
1:28 Physical Connection of the Two Routers Using Lan Cable
2:20 Primary/Root Router Settings
2:48 Find Extender Router IP Address
3:31 Secondary/Extender Router Settings
at 1.45 you can connect lan cable to extender router's lan port its called AP Access Point Mode
in this video i have connected lan cable to extender router wan port its called Router Mode
For AP Mode Must Watch
▶️Router as an Access Point | Connect two routers with LAN Cable | Extend WiFi Range • Router as WiFi Access ...
🛒Buy Best Seller WiFi Router From Below link :-
🟩TP-Link TL-WR845N 300Mbps Wireless-N Router
amzn.to/3e19S7u
🟩D-Link DIR-615 Wireless-N300 Router (Not a Modem) amzn.to/30mCCC7
🟩TP-Link TL-WR841N 300Mbps Wireless N
amzn.to/2MUqSQO
🟩TP-LINK TL-WR840N 300Mbps Wireless N Router
amzn.to/3e1aoSY
🟩TP-Link Archer C20 AC750 Wireless Dual Band Router
amzn.to/3fgbNoX
🟩TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200 Mbps Wi-Fi Speed
amzn.to/2MP7pkA
🟩Tenda AC10 1200Mbps Wireless Smart Dual-Band Gigabit WiFi Router
amzn.to/3fCeS3p
🟩D-Link DIR-841 - AC1200 MU-MIMO Wi-Fi Gigabit Router with Fast Ethernet LAN Ports amzn.to/3fxDbiN
🟩TP-Link Archer C50 AC1200 Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN amzn.to/3eGJkI1
🟩TP-Link TL-WR820N 300 Mbps Speed Wireless WiFi Router, Easy Setup, IPv6 Compatible, Supports Parent Control, Guest Network, Multi-Mode Wi-Fi Router amzn.to/2ZGeCLf
🟩TP-LINK TL-WR840N 300Mbps Wireless N Router (Not a Modem) amzn.to/30gD0Cc
🟩TP-LINK TL-WR940N Wireless-N450 Home Router (Not a Modem) amzn.to/397jUSI
🎬 Recommended Video Must Watch :
▶️How to Connect Two Routers Wireless using WDS Wireless Distribution System Bridge | Increase WiFi [Updated] • ✓ How to Connect Two R...
▶️How to Connect Two Routers Wirelessly to Increase Extend WiFi Range
• ✓ How to Connect Two R...
▶️How to connect two routers to Increase or Extend Home WiFi Range | WiFi Repeater WiFi Extender • ✓ How to connect two r...
▶️How to Bridge Two TPLINK WiFi Router Wirelessly Using WDS Wireless Distribution System Settings • How to Connect / Bridg...
▶️How to Access WiFi using Ethernet Port or LAN Port | WiFi to Wired • How to Access WiFi usi...
▶️How to Connect Printer to WiFi Router | Convert Any Printer To WiFi Printer using Ethernet Port • How to Connect Printer...
▶️Best WiFi Router Buying Guide | WiFi Router Technical Specifications-Terms Explained in Details[ENG]
• ✔️11 Technical Specifi...
🎬 Recommended Video Playlist :
🔁How To Connect Two Routers • How To Connect Two Rou...
🔁Best Technology Videos by LocalGuy • Best Technology Videos...
🔁Install Android Custom ROM • Install Android Custom...
🔁Vehicle Security | Car & Bike • Vehicle Security | Car...
🔁How to connect Canon iR3300 Printer to WiFi Network | Canon iR3300 Scanner and Printer,Scan to PDF,ScanGear • How to connect Canon i...
🔁Cisco CCNA CCNP CCIE LAB Practice • 200-120 CCNA Learn | P...
📺🔔if you have not subscribed to my channel then please subscribe first :- czcams.com/users/LocalGuy?su...
👤Connect with me on Social Media @LocalGuyTech
Facebook@LocalGuyTech- / localguytech
Twitter@LocalGuyTech - / localguytech
Instagram@LocalGuyTech - / localguytech
📣⛔Disclaimer: All videos on my channel are subject to copyright.if you have any queries,suggestions or found any error /mistake regarding tutorial please notify me in the comment section.i will answer all your questions / queries.
some of the links are third party affiliates.
Thanks.
❤️🧡💛💚Local Guy❤️🧡💛💚
A CZcams Channel for Technology,Internet,IT,Software,Programming,Developer,Linux,Networking,Computer,Android,Iphone,iOS,IT Analyst,Data Analyst
I've watched 30 videos on connecting two routers with wires. This is the only one that was not Lan to Lan but Lan to Wan. After hours of struggling this solved the issue and allowed me to connect the secondary router to the setup. What made it more difficult for me was that my primary router is a SIM card router too, so no other source of internet either, had to connect to the WAN. This helped, will save and like the video.
this link worked for me. explained everything. i did that and worked perfectly. czcams.com/video/J5QJb3O19zI/video.html
@@torababdullah7952 for a
@@torababdullah7952 for
@@torababdullah7952 for
@@torababdullah7952 for
Thank you so much for this vid! Super helpful 🙌 More power to you Local Guy!
bro thanks for the help
it worked like a charm
I had a router lying around just like that
it helped me move from my top floor to ground floor due to internet accessibilty now at all floors thanks buddy
Thanks @local guy. I was able to set up my extended router.
Perfect 👍! Straight to the point! Thanks 🙏
I have dual band router fiber connection and using Archer A6 as an extender but to my dismay the Archer A6 doesn't make any difference in connection speeds whatsoever. Given the short length of the CAT 5E cable it can only be placed near to the root fiber router which renders it unutilized.
Any Suggestions?
Many youtuber connect it to wan port ....
But your method is 101% Right to setup it.... simply.
Very clear explanation. Thanks a lot :-)
Your video is very helpful! Thank you!! So is there any way to connect to the other extended wifi automatically? I have to manually connect to my other wifi router manually :( have the same ssid on both routers. Thank you
It direct works on my TPLink router once I auto detect the dynamic IP, no settings needed on the subnet
Thank you Local Guy :D
After referring multiple sites and youtube videos but still failed, your video solved my issue directly
For those who are curious like I was: You can use this method as a network switch on top of its Wifi extending capabilities!
Great video, helped a ton!
Hello, what do you mean by network switch?
Thanks man, very nicely explained
Very helpful, thanks!
Excellent video, it helped me . Thank you very much.
Great Tutorial, Thanks buddy
Thank you for this amazing video helped a lot 👍🏻
Awesome Video. Sorted my issue. Thanks a mil
can we have seem less connection between main router wifi and extended router wifi ?
if not there we always need to select manually between two routers which is same as wifi extender like tp link.
Is there a way of seemless connection between wifi ranges of main router and extended one? . only mesh router is the option ?
This video is very helpful for me i have seen a lot of video but not proved helpful for me but this video is really helpful for me that is why i have subscribe this channel and thanks to local guy channel for such a awesome and helpful video.
Hello Friends!!! Pls Like 👍 & Share this video with your friends. Don’t Forget to Subscribe.it's 🆓💯
🔔📢 czcams.com/users/LocalGuy Take Care.😀 Lots of Love 💗💗💗
👤Connect with me on Social Media @LocalGuyTech
📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech
📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech
📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech
hey can u give me ur whatsapp?? i will be going to extend mine. but is very confusing
If I do this can I access wifi of main and extender routers? And at the same time can i use both routers' LAN ports to connect to internet using my devices (i.e. laptops, computers)?
Thanks A whole bunch, you saved my life.
extremely detailed video. thankyou so much for making and sharing the video
This video is very helpful..... short simple and it works 🤟🤟
Can you attach a USB hard drive to the extended router for NAS? I'd like to maintain 2 separate USB hard drives for NAS in 2 different location for redundancy. One on the home router and the other on the extended router in my outbuilding.
thank
you so much dada..
Liked and subscribed !
Tq so much sir🥰
Quick question, can the extender routers lan ports be used aswell as wireless ?
Hii. Can I limite the bandwidth & amount of data to extended router? Plz help.🙏
& If it's possible how todo this?
it worked thanks a lot!
I have two computers and one routers.... Should I buy one long Ethernet cable attach both computes in one routers??? And after that do I wanted to change settings in computer for passing net into both computers?
Great video. Though, it would be best to state different networks are created.
So it’s Roots Lan to secondary’s Wan, correct? After this would I be able to connect multiple ethernets to secondary router without causing too much traffic on the ethernet that is currently bridging the two routers?
Excellent! No shit only business. Great video, demonstration
Hi I'm curious, why don't go Lan to Lan, change the extender router lan ip login from 192.168.0. 1 to 192.168.100. 2 for example and disable the Dhcp.?
Thankyou so much 🔥❤️
I have connected two routers via Lan port. If you connect to wan port, you need to configure different subnet mask, which is not a good idea for dhcp.
Why have you connected threads to the antenna port of black tp link router?
I watch so much video to connect lan to wlan but ur video help me 🙏🙏🙏
Excellent explanation and visuals! Thank You!
Thanks for sharing
thank you it helped me a lot
I followed the same process that is LAN cable from Main router to WAN port of the Extended router. But in DHCP Client List page ,my extended router is not showing up. Any help is appreciated. Thanks
In a lot of video shown the DHCP should be disabled in the extended router but here in this video both routers have DHCP enabled but subnets different hence allocation of IPs has no issue . Can you pls explain elaborately how both DHCP will work.
here i used wan port so two different network created,hence to dhcp server for each network.
if connected to lan port then both routers will be on same one network.so only one router will act as dhcp server.
Helo brother my main router is tenda ac1200 and repeater is tplink wr850n.. so my question is will the settings be the same as you have told in the video??
Wow I didn't think it's complicated it's hard to follow
Thank you so much bro .... For helping
Always welcome
This guy sounds like a Windows Tech Support Scammer in India. Just kidding, thanks for the info.
Thanks!!! Pls Like 👍 & Share. Don’t Forget to Subscribe.
🔔📢 czcams.com/users/LocalGuy
👤Connect with me on Social Media @LocalGuyTech
📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech
📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech
📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech
War has been started for less 😂😂😂😂😂
Probably his ex workplace
Right true
We all sounds as him but not all are scammers
Sir, I have one question, hope you will reply, my root router is of 2.4ghz can i use extended router of dual band? Iam getting low speed on wifi on my current router & getting proper speed on lan, so by this method can i get good speed by using dual band router as extended router?
Yes if you are connecting your dual band router via LAN cable to the main router. Then yes you will get good speeds on 5ghz wifi. But extending it wirelessly won't be that fruitful for you.
thank you!!!!!
at 3:37 -- what if my d-link router doesnot have wireless password/pin on the backside ? 2 days ago I got bsnl ftth connection and I want to make use of my old router as a extender. could you please tell me what cable I need to buy? thanks in advance.
Berry good ma man
Thank you so much, You saved my day ❤
Glad it helped!
So i should buy the same brand primary router to use a secondary router? Or i can buy any brands?
Thank you,
great video
You set them on two networks. How do you access the one from the other?
@Sushmita Jaiswal what if both the router are of different company
Great tutorial! Am I able to have my devices automatically connect between the stronger signals or will it have to be done manually?
Newer devices will connect to stronger signal auto.if not then you can use 3rd party app from playstore. Thanks
@@localguy Is it possible to connect the cable from my primary routers WAN port to secondary routers LAN port? Will it work the same?
It worked thanx
God bless you
Thanks!!! Pls Like 👍 & Share. Don’t Forget to Subscribe.
🔔📢 czcams.com/users/LocalGuy
👤Connect with me on Social Media @LocalGuyTech
📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech
📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech
📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech
Do we need to rest the second router before configuration, as I was using ACT internet connection previously in TPLink router. Now I have taken HATHWAY internet connection. Pls confirm
Why do we need to choose a different subnet from the WAN subnet ?
Also I have an ADSL router as extender router so can I use it to connect to my root router ?
You can connect ADSL router to main router czcams.com/video/Ixg5BPzoN4M/video.html
good information
Thanks for using English.. really helpful
Where are you from?
I wanna ask if we can connect 2 routers via LAN?
I have an old tenda modem from airtel. I wanna used it as an extender. However, it doesn't has a WAN port. It old has DSL
Kindly help me out
Thank you ❤️❤️❤️
Don’t Forget to Subscribe.it's 🆓💯
🔔📢 czcams.com/users/LocalGuy Take Care.😀 Lots of Love 💗💗💗
👤Connect with me on Social Media @LocalGuyTech
📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech
📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech
📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech
Thanks
Must Watch ➡ इस video में wifi से जुडी बहोत सी technical बाते है जो आपको इससे पहले शायद ही पता होगी ➡ czcams.com/video/ZzGA25QL43g/video.html
🛒Buy Best Seller WiFi Router From Below link :-
🟩TP-Link TL-WR845N 300Mbps Wireless-N Router
amzn.to/3e19S7u
🟩D-Link DIR-615 Wireless-N300 Router (Not a Modem) amzn.to/30mCCC7
🟩TP-Link TL-WR841N 300Mbps Wireless N
amzn.to/2MUqSQO
🟩TP-LINK TL-WR840N 300Mbps Wireless N Router
amzn.to/3e1aoSY
🟩TP-Link Archer C20 AC750 Wireless Dual Band Router
amzn.to/3fgbNoX
🟩TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200 Mbps Wi-Fi Speed
amzn.to/2MP7pkA
🟩Tenda AC10 1200Mbps Wireless Smart Dual-Band Gigabit WiFi Router
amzn.to/3fCeS3p
🟩D-Link DIR-841 - AC1200 MU-MIMO Wi-Fi Gigabit Router with Fast Ethernet LAN Ports amzn.to/3fxDbiN
🟩TP-Link Archer C50 AC1200 Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN amzn.to/3eGJkI1
🟩TP-Link TL-WR820N 300 Mbps Speed Wireless WiFi Router, Easy Setup, IPv6 Compatible, Supports Parent Control, Guest Network, Multi-Mode Wi-Fi Router amzn.to/2ZGeCLf
🟩TP-LINK TL-WR840N 300Mbps Wireless N Router (Not a Modem) amzn.to/30gD0Cc
🟩TP-LINK TL-WR940N Wireless-N450 Home Router (Not a Modem) amzn.to/397jUSI
Nice video
Here I have to power on root router if i want to use extended router. Is there a way to power on any one of the router based on the need?
What? I should connect the LAN cable to the Root Router's Lan port and then the END of the cable to the WAN port of the SECONDARY Router? But I saw on the other videos that I should connect it also on the secondary router's lan port. Please tell the exact answer
I don't think you're right. It's wrong. I should've connected it LAN to LAN
Lan to lan it wont work... Cause there's a pattern of input and output... If u selct both side output then from where the secondary router will collect data from internet... I mean ping... Lan port means output... Wan port means input for thr router..
btw that's AP Mode you are talking about i.e Lan to lan.this video is for all routers.new routers supports different types of working mode like Router Mode,Access Point Mode
Range Extender Mode,Repeater,Bride Mode,WISP Mode.and some old routers supports only router mode. by default all routers are in router mode. In this video it's router mode.two different subnets.
No. it's not like that.if you want to use router as AP access point then connect cable to Lan port.new routers supports different types of working mode like Router Mode,Access Point Mode
Range Extender Mode,Repeater,Bride Mode,WISP Mode.in this video it's router mode.cable connected to wan port.two different subnet created.
On the esxtender router can I connect a USB printer. I have an IPAD
i did connect a extender router,but the thing is i am losing half of my bandwith like my main modemrouter can do 200mps on 5ghz band and 200mps on ethernet but when i connect extender router my speed cuts down to about 92 on my extender router but still im getting 200mps on root router .Im using cat 5e cable
I want to keep the Wifi credential and SSID same as main router like wireless extender. So that i don't have to switch my wifi network. It is possible? I guess this happens in large hotels
Can it work on Jio/Airtel fibre? Want to buy it for office work and office have more space than usual for one router.
Send your thoughts, thank you.
Wow thanks
the rout router is from my internet provider and that's the router am connected to right now, but I don't have access to its setup page, and I want to get a new router to connect to each other, will it affect it if I not enable DHCP server?
Thanks maan
Good
What color coding for utp cable did you use on router to router? Straight through or crossover? Thanks!
Cross over.
Btw Now a days Routers comes with auto mdi/mdix features allowing both cross and straight.
Thanks.
Sir is there any speed down during conecting a router to my main router ...suppose i have 50 mbps plan .. how much speed i got from my 2nd router after connecting in my main router
speed differnce will be about 2-3 mbps
What about if I have two routers that are the same model provided by the same internet company. The only difference is the passwords. Both will work singularly without any configuration just as long as I'm using the correct password for each router. Does that simplify things if I want to use one to extend the WIFI signal strength?
good question. I was thinking the same thing
Will this allow resource sharing between the two networks given you have assigned them different subnets?
Here two different network created. Use lan port to connect two routers on same network for your requirement. Thanks.
HI , thanks for the tutorial in this tutorial How should i configure the "range extender" ?? as an access point or range extender or a router ?? will this work for any mode i mean
if you want to use router as AP access point then connect cable to Lan port.new routers supports different types of working mode like Router Mode,Access Point Mode
Range Extender Mode,Repeater,Bride Mode,WISP Mode.in this video it's router mode.cable connected to wan port.two different subnet created.
@@localguy hi
@@localguy I am planning to use my old router as an extender if I get an Ethernet cable is that enough
i have a home computer placed to phone line and just want it to my tv for firestick and was given that and have two modems and two routers and tried to get the wifi to connect to my tv and would LOVE to know how to get it to work since I use the password and states no internet connection
Hello There want a quick help
Can u tell me which cable is that blue one ( I also want to buy a ethernet cable for my router to connect pc)
Thank you pls reply 💓
You can buy cat5 cat6 cable
Well done to you. This was awesome too watch and comments show that. You are much appreciated thanks for the time spent. Wish you all the success on your channel. Will save and like.
Thanks
Thanks for info... I need to do set for 2nd router..... I don't know assigning ip.. Can you guide
Just resetting the new router worked for me
Yes... It works that way ! Simple !
Can I connect 2nd router ( use this as a extender ) without any wire ? wireless?
Brother I have configured tp link tlwa701nd model for bridge with AP mode, the internet is working properly but now I'm not able to access the login page of tp link router. I have changed the IP address also but still can't access to router. I have watched so many videos on CZcams but only on my router the problem is persisting.
how to connect the old router to the phone line in different room will it be more helpful ?
thaanx it helps a lot can you please tell how to change main router to dual band i dont want to extend i just want to change router how to do it please reply.
If my main router has an ip address that ends in .254, and my second router ip address also ends in .254,how can I configure my 2nd router if I can't make a ip address that goes past .254? Please help! Thanks.
my house have 3 floor. in ground floor have 1 router which is main. I have put extended router in second floor and extended from main router.
my question is for third router on third floor. should I extend from extended router from second floor or from main router? which is better and which pros and cons ?
You can take the connection from 2 floor to 3 rd.. connect the lan cable to Lan port 1 (second floor) to Lanport 1 (third floor).. simple
SUperb WOrks 1000%%
I did the same but my connection on secondary router doesn't last its internet access more than an hour then it goes on no internet connection. How to fix this
What's the maximum length of LAN cable i.e CAT 6 recommend between two routers. Is it 50 merers fine?
Cat6 length limit 100m
@@localguy Can we use fiber cable?..and it's fine for 200meters?
Great video. It was really helpful. I have a question. What should be the maximum length of lan cable? For 50 meters lan cable wt should be the configaration.
Cat cable supports up to 100m. Thanks