Innova 5610 vs TPMS light

Sdílet
Vložit
  • čas přidán 5. 09. 2024
  • Innova 5610
    The information in this video is for general guidance, not responsible for any errors or injuries that you have done

Komentáře • 14

  • @analynelideros4887
    @analynelideros4887 Před rokem +1

    Beautiful inside car i love it here watching replay

  • @randyslye
    @randyslye Před dnem +1

    Threshold... if below the threshold pressure, a fault code status would be generated? My question, with tis bidirectional tool, 5610, can I turn off the TPMS system completly? I have 2 batteries dead in my Chrysler 300 2012 car.. I wand to disable the entire monitoring system, eliminate the tire code on the dash.... You know just live my life without the TPMS system?🙃

    • @dannysautorepair
      @dannysautorepair  Před dnem +1

      You can only erase the code but it's gonna come back as long as the sensor is bad.

    • @randyslye
      @randyslye Před dnem

      @@dannysautorepair Thanks for reply..

  • @jamesmichael8549
    @jamesmichael8549 Před 5 měsíci

    Do you have to pay every year in order for this OBD reader to work ? If you dont pay does that still work ? Do you need to have internet to used it ? If you don't updates does that still work without updates ? Out from the box can you used it without wifi or internet ? Can this scan for Fuel Pressure ? And can this scan for compression test ? Is this a Complete diagnostic Scan tools ?does it Scan from 1996 cars going up ? How about Toyota Camry 2001 2.2 Liter 4 Cyl or Buick Park Ave 2003 3.8 Liter does it Scan these cars ? Does this scan for battery ignition parameters ? Does it Scan for a bad head gaskets ? Is this the latest version 2024 ? Can you use a wifi of your phone to scan live data .? What about the Updates can you used a wifi ?

  • @royphelps6377
    @royphelps6377 Před 9 měsíci +1

    The TPMS correct tire numbering location is as follows: #1=driver front, #2=passenger front, #3=passenger back, #4=driver back and #5=spare tire. Also, the ID Code numbering shown for each sensor is the factory assigned number stored in the BCM (or computer.) When installing a new sensor the same corresponding number should be copied and assigned to the new sensor. I'd suggest using OEM parts for new replacement sensors. In addition, when rotating tires, the sensor should be placed at the assigned location as that's what the car's computer recognizes...or a TPMS dash light will illuminate.

  • @ooscgt
    @ooscgt Před rokem +1

    Hi. Did you guys ever figure it out? Thanks

    • @dannysautorepair
      @dannysautorepair  Před rokem

      It was 2 bad tpms sensors

    • @ooscgt
      @ooscgt Před rokem +1

      Thanks for sharing. I have the same van and thinking about getting the same scanner. Why does the tool show 5 tires?. Thanks again.

    • @dannysautorepair
      @dannysautorepair  Před rokem +1

      It also displays the spare tire

  • @noblethomas23
    @noblethomas23 Před 6 měsíci +1

    can u reprogram new tmps with this tool ?

    • @dannysautorepair
      @dannysautorepair  Před 6 měsíci

      What kind of car do you have ?

    • @dannysautorepair
      @dannysautorepair  Před 6 měsíci

      czcams.com/video/muyJR5r0Ijs/video.html
      Check this video , depending on what car you have you can buy one of these for your make and model and program it this way because I'm sure the innova one I have will not program it.