Waouh je viens tout juste de commencer ma formation de sertissage et grâce à cette vidéo j'ai pu comprendre et découvrir plusieurs astuces ou gestes malgré que nous n'utilisons pas le boulet de sertisseur,merci très chouette !!!!!
You eyeballed it -30 points ! Kidding, Gotta love a man who can make his own tools. I was a machinist out of HS-parts for military helo's. The inspectors would borrow mine. I've retired to finer things, w/ tougher critic( wife) Great job, thanks for the 411.
Could you make another video just like this explaining what tools and diameters and sizes of them too please? This is the most informative video ive seen on setting, and you have yet to speak a word. Amazing work.
i love this video, very relaxing to watch and i am learning so much more about settings. thank you for your time and your knowledge that you share for us.
Nice video!! I feel way more confident about my next project after this great tutorial from a true pro. The repair jeweler in me makes me cringe about anything with this style setting... 5 mins in the sonic will make a poorly done one look like a hillbilly smile.
this is the only video so far where ive actually been able to see what happens when you make the bead and that helps a lot. the only question i have for clarification is when you are pushing the bead down and making it smooth in one direction does it just touch the 2 stones? or does the bead spread on the other side too evenly?
Hank you for sharing your work . But I have question if you dont mind What's the name of the tool you used in min 4.50 ? For making dots where you want to drill??
nice video indeed. I am also interested in the type of bur you are using to reshape the burnisher. Do you sell of can you tell me where to find it ? Thank you.
Hello At 4:47 how can you precisely find the center of the circles. I mean doesn't it need to be super precise? If you don't drill exactly at the right place the diamond won't fit, right?
What a beautiful video!!!! Can you tell me (estimate) the size of the stones (1.5,1.75,2mm) that you used here? And about how many in total that you used to make the 3 rows down the one side? Thank you once again!
Do these guys make good money? I have steady hands and exceptional eyesight, and i think working on customs and just setting the stones would be so chillin.
Thanks. You are truly expert. I still use hand gravers, I'm thinking hard about changing over to the the air driven. Your videos are very constuctive as well, the best I've seen on YT.
+MrKalvinC Possible, yes. Time efficient? You'll be turning this video from 18 minutes into ~6 hours or so. Haha, on a more serious note, I would not know how to go about it but i'm sure it can be done
maby 5 point diamond's.just guessing.go too a jewelers supply house,and look at all the tool's.and just ask the salesman how to use it..and keep watching dimond setters like this on you tube..and get a bench,pratice,pratice,pratice..and learn how to polish your work.learn 1 tool at a time.dont try to go fast,at first.when you get your toll's,make a mark on all your toll's,so like a identity etc.i used to cut 3 line's on all mine..my friend had 2 line's on his tool's.the mandrel,plyers,everything.so if you get a job doing this line of work,and your hamer is missing,just try to look at all the jewelers tools to see who made an honest mistake,and picked up yours,..and alway's watch the best,like this worker..youtube has lot's of workers showing how to do something..this was a perfect setter,and been doing this art for a long time,i'm sure..i'm a repairmen,gold smith with 60 plus years under my belt,and when I say this guy is good,i mean it''☼
Waouh je viens tout juste de commencer ma formation de sertissage et grâce à cette vidéo j'ai pu comprendre et découvrir plusieurs astuces ou gestes malgré que nous n'utilisons pas le boulet de sertisseur,merci très chouette !!!!!
MVCCI À l'école on sertissait sur du laiton ou maillechort, puis le sertissage sert à fixer les pierres alors je ne comprends pas ta question
You eyeballed it -30 points ! Kidding, Gotta love a man who can make his own tools. I was a machinist out of HS-parts for military helo's. The inspectors would borrow mine. I've retired to finer things, w/ tougher critic( wife) Great job, thanks for the 411.
I HAVE BEEN UTTERLY ENTHRALLED WATCHING THIS MASTER CRAFTSMAN AT WORK, IT HAS BEEN SHEER DELIGHT. THANK YOU.
Thanks for the compliment
Could you make another video just like this explaining what tools and diameters and sizes of them too please? This is the most informative video ive seen on setting, and you have yet to speak a word. Amazing work.
Ottimo lavoro ed eccellenti dettagli, complimenti. Parola di orafi italiani
Excelente video. Muchas gracias. He aprendido muchísimo. De nuevo muchas gracias. Lo felicito y le agradezco su generosa enseñanza
i love this video, very relaxing to watch and i am learning so much more about settings. thank you for your time and your knowledge that you share for us.
It is my pleasure
Nice video!! I feel way more confident about my next project after this great tutorial from a true pro.
The repair jeweler in me makes me cringe about anything with this style setting... 5 mins in the sonic will make a poorly done one look like a hillbilly smile.
Aaron Loveless haha this made me laugh
Bas ste sve lepo objasnili puno hvala
Thank you Frantisek !!!! Bravo !!!! Great video! Great work great tutorial !!
Thanks for the compliment
Excellent video ! Congratulations !
I admire your patience .
Giacomo I admire yours as well...
Thanks for sharing your techniques , very cool.
Thanks for sharing your work.Like your spacing with the beading tool!
Techniques are amazing, I’m new to this what is the tool you are using to make the circle impressions?
I love this video. But I wish there had been a running commentary on what tools and what size you were using, and why.
Bas ste lepo sve objasnili
This is fantastic, thank you. pave is just the most stunning technique.
Excellent 🎉
O melhor vídeo que assisti até hoje. Parabéns
Educative and interesting. Diamonds will always be beautiful
Una gran demostracion! muy intresante las ampliaciones, se puede apreciar todo en detalle
Nice work, very nice.
Молодец!
This vid earned my like for the phone going off, every single time im working on something my phone gotta annoy me somehow. Lol
Waouh du grand art !!!!!!!
Wonderful tutorial!
Thank you !
Guy Cohen Thank you very much
Hi, congratulations, you are very very skill,,,, you deserve a better optical device!!!
Amazing work !
May I know the model of the microscope and magnifying power you are using here ?
These videos are better than college direction
Excellent video is that a diamond bur you use to clean up the beading tool and where can I get one.
great work colleague👏
this is the only video so far where ive actually been able to see what happens when you make the bead and that helps a lot. the only question i have for clarification is when you are pushing the bead down and making it smooth in one direction does it just touch the 2 stones? or does the bead spread on the other side too evenly?
Thank you for the video!
wonderful tutorial,thank a lot.
Dammit man!! This guy has skills!!!!💪💪💪
Hank you for sharing your work . But I have question if you dont mind What's the name of the tool you used in min 4.50 ? For making dots where you want to drill??
Sharp tipped steel basically.
Rose Diamond Jewelry it's called an automatic center punch
can u make more video like this please i am
beginer jeweler this video help me a looot
good job
Awesome!!!!!!!!
Excellent video. May I ask what bur you are using to sharpen your beading tools with?
Thanks in advance
amazing video! Thank you so much
Great video! I'm struggling with the cut depth. I dont know how deep should I go with the ball bur. Do you have any advice?
From where did you learn such craftsmanship? Blissful
+Digvijay Jain
From Vitalij Kricuk
super job !1
Fabulous!
Thank you for this
Dis kismi yarmayida cekseydin keske neyse ellerine salik zevkle izledim
You are a monster 🙏🏻
it s helping me too much,,I'm learning,,and this tutorial is beautiful,thanks for sharing and the music great,,
thanks a lot from new york
I am glad that I could help
lot of jewelers there..
Hello, where can i get a grainer or beading tool big enough to mark the size of the stones? Also, what lubricant do you use when drilling? Thanks
nice
What is the drill bit you used to shape the beader with called? Very nice work!
nice video indeed. I am also interested in the type of bur you are using to reshape the burnisher. Do you sell of can you tell me where to find it ? Thank you.
Can you show how you cut the side of the plate the camera blacked out
Hello
At 4:47 how can you precisely find the center of the circles.
I mean doesn't it need to be super precise? If you don't drill exactly at the right place the diamond won't fit, right?
beautifull
THANK YOU !
What kind of pointy bur are you using in between the stones to make the prongs?
what is the tool that is picking up the stones called? Please and thank you.
What a beautiful video!!!! Can you tell me (estimate) the size of the stones (1.5,1.75,2mm) that you used here? And about how many in total that you used to make the 3 rows down the one side?
Thank you once again!
+Ben Juarez
1,05 to 1,10mm
the one at the beginning looked 1.08
Pick that call man !
oh wow very nice, what's that tool used to make the circles?
its a beading tool used to make round beads for settings usually. but stones this size it works like a bezel punch.
What’s the name of the tool used to make the circle placements at the beginning
Orta kismin uclarina sustirnagida yapsaydiniz
Hi ... thanks for posting these excellent videos ... clear in sunprocedimiento ... may ask you where you buy the tools ?? greetings
Marcelo Gaggioni
gaggiouy
Hi send mi pleace email goldeneye.fh@gmail.com
What magnification are you using? Love your work!
Depend's On Your Eye Cond.Not His.
Do these guys make good money? I have steady hands and exceptional eyesight, and i think working on customs and just setting the stones would be so chillin.
Eric Cartmenez i charge 2.4 euro per stone for this setting. Multiply that by the amount of stones i set (which is around 200-300 a day).
@@antosharboonian6110 hello can i get some cotact details? i would like to have some stones set in a ring, regards,ala
Did you use a gravermax to bead?
How much time did it take you to pave this (only from this part), and how much does a jeweler charge for this (excluding diamond price)
Do you do classes ?
what size is that size of that bit bur drill?
Frantisek Holub: The metal appears yellow, but the easy beading in looks like malleable platinum. Maybe high carat gold? What is the metal please?
750/1000 yellow
Thanks. You are truly expert. I still use hand gravers, I'm thinking hard about changing over to the the air driven. Your videos are very constuctive as well, the best I've seen on YT.
is this 24 karat gold? the gold looks so soft
Looks like brass to me
what is the drill bit called that your using at 13:46
I’m learning it’s hard tho
how do you save your eyes from the strain?
Hi with best quality stereo microscope
4:21 What kind of tool is this? plzzz
Hi - is it possible to set princess cut diamonds like this?
+MrKalvinC Possible, yes. Time efficient? You'll be turning this video from 18 minutes into ~6 hours or so. Haha, on a more serious note, I would not know how to go about it but i'm sure it can be done
how you gonna drill square hole?
How do they stay in glue or pressure?
Javon Alston pressure
What is the name of the tip 11:17 min
what did you use to stick the stones in?
I hope im not to late but its a "Stone pusher"
Damn - those are small!
maby 5 point diamond's.just guessing.go too a jewelers supply house,and look at all the tool's.and just ask the salesman how to use it..and keep watching dimond setters like this on you tube..and get a bench,pratice,pratice,pratice..and learn how to polish your work.learn 1 tool at a time.dont try to go fast,at first.when you get your toll's,make a mark on all your toll's,so like a identity etc.i used to cut 3 line's on all mine..my friend had 2 line's on his tool's.the mandrel,plyers,everything.so if you get a job doing this line of work,and your hamer is missing,just try to look at all the jewelers tools to see who made an honest mistake,and picked up yours,..and alway's watch the best,like this worker..youtube has lot's of workers showing how to do something..this was a perfect setter,and been doing this art for a long time,i'm sure..i'm a repairmen,gold smith with 60 plus years under my belt,and when I say this guy is good,i mean it''☼
what tool is that at 4:55
this is my work
Are they real diamonds?
Shane K
of course Sir
No jingely-dingely music! HURRAY!
That is the slowest way of marking the piece before setting i have ever seen
Fighter RA Thanks