How to turn off the buzzer beep sound in Tiandy NVR?

To turn off the buzzer beep sound on a Tiandy Network Video Recorder (NVR), you typically need to access the device's settings. Here's a general guide that should work for most Tiandy NVR models:
1. *Access the NVR Interface:* Start by logging into your Tiandy NVR using a web browser or the Tiandy NVR client software.
2. *Navigate to Alarm Settings:* Look for the "Alarm" or "Settings" section in the NVR interface. This is where you can adjust various settings related to alarms, including the buzzer beep sound.
3. *Disable Buzzer Beep Sound:* Within the Alarm settings, there should be an option to enable or disable the buzzer beep sound. This option might be labeled as "Buzzer" or "Audible Alarm."
4. *Save Settings:* After you've disabled the buzzer beep sound, make sure to save the settings. This is often done by clicking on a "Save" or "Apply" button within the settings interface.
5. *Test the Changes:* To confirm that the buzzer beep sound is turned off, trigger an event that would normally activate the buzzer (such as motion detection or an alarm test) and verify that no sound is produced.
If you have a specific Tiandy NVR model or software version, the exact steps might vary slightly. In such cases, referring to the user manual or contacting Tiandy support for assistance can be helpful.

[@antoniomax3163]

How can I record video from surveillance cameras on a PC using Easy 7 Smart Client Express Win64? I don't have a NVR, but a very powerful computer.