Does It Really Need a 2 0 - MG 1/100 OO Raiser | REVIEW
Vložit
- čas přidán 22. 03. 2022
- Spicer reviews the MG OO Raiser
The GN-0000+GNR-010 00 Raiser (aka 00 Raiser) is the combined form of GN-0000 00 Gundam and GNR-010 0 Raiser in season 2 of Mobile Suit Gundam 00. Setsuna F. Seiei pilots the 00 Gundam and Saji Crossroad pilots the 0 Raiser, however, when combined Setsuna can operate both units himself.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
▶Check Out The BEST Gunpla News: • Gunpla News: GM Guard,...
▶MG Reviews: / watch
v=xv5rRVC5CD8&list=PLGGZ5BSUuePI7AvN2Y0_FO8-gIlv8ywCA
▶HG Reviews: • HG 1/144 AGE-3 Normal ...
▶RG Reviews: • RG 1/144 RX-78-2 Gunda...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
▶Get Your Official Merchs: teespring.com/stores/gunpla-n...
▶Join Us On Facebook: / gunplanetwork
▶Check Out our Instagram: / gunplanetwork
▶For All The Latest News:
www.gunplanetwork.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ - Zábava
We don't need a 2.0 of this kit. What we really need badly is a Exia 2.0, but what we r getting instead is a MG Gundam Astraea. It a nice kit and all, but do we really need that.
Are differences from XN Raiser besides the XN?
@@insansiregar6158I have all 00 (raiser, 7 sword and xn) in case of the xn and regular 00 raiser, xn is the 00 raiser (even the manual without english translation) with additional runners to make the xn equipment
If I remember correctly, the effect parts for the GN sword II's are for the raiser sword, which it performed while using them in rifle mode, which explains why they are perpendicular from the blades in sword mode.
That makes way more sense haha Thank you for the info!
Hey man. Just to add, the effect parts for the GN Sword II's are also because the swords have a beam saber mode.
it's the one that destroyed that satellite in s2
I bought me this kit couple of days ago, have yet to build it. Looks amazing.
Build it. It's actually fun.
Thank you, good timing! Hope you have fun building it!
Honestly, if they update the abysmal hands it would already be in a far better spot than it currently is. Those hands can’t hold anything aside from the GN Sword 2 and beam sabers without the forearm plug. So imagine trying to get it to hold the Buster Sword from the Seven Sword 😬 and the fact that there are no expressive hands hurts too
Not gonna lie I would honestly really like it if Bandai put out a MG hand set kinda like they did for the build fighters hg's.
if any third party model maker or even bandai, make custom fix posed hands for the old MG Setsuna kits, i'll fucking pay for em, but probably will never happen
lol nothings impossible this days
Like MG Exia, I don't think a 2.0 is necessary. But unlike Exia, 00 Raiser can be a bit back heavy.
Especially with the XN unit. It even includes a stand
@@bagsikdangal Oh yeah that guy. It's one of my holy grail.
You just need to swap the hands for this.
It's an updated Exia that people want. Granted there are other MGs that need a 2.0 more.
Some new hands and a few joints like the shoulders would make this pretty modern in terms of the Dynames and Kyrios.
Love Gundam 00
i bought the 00 7 sword due to it being the cheapest among the 00 variant. the forearm definitely likes to come off. the ankles and knees are also on the weaker side, but at least all the weight are on the sides so after tightening the joints it can stand
At least a little tighten can help with these joints, just wish the GN Sword 3 was workable in sword mode without the extra help.
@@thespicer how to tighten joints(
@@insansiregar6158there's different tutorials here in CZcams
Built the seven sword version 10 years ago, a pretty solid kid and actually can balance itself well with both the two gn buster rifle/sword.
Yeah the bicep connection is kinda a weakpoint sadly.
Good to know it wasn't just me haha
arms?
Probably not, this is one of those kits that is more solid than the Perfect Grade that was released prior to it. That's why they re-used this kit for the Quan[T] - its just a very solid kit.
But it would no doubt be a better kit with newer engineering
Actually the MG 00Q was released before the Raiser surprisingly. It’s still a fact that both has very solid inner frame though
MG 00 Qan[T] Full Saber, is worth getting. That kit was surprisingly easy and fun to build.
@@bagsikdangal I know. Just saying that the original 00Q came out first.
Timeline is 00Q -> 00R -> 00 7 sword -> 00Q Full Saber.
So this frame is from the original 00Q back in 2010, not the 00 Raiser which came out in 2011
Great video btw :)
Thank you!
Same here, I need 00 raiser 2.0! ☺️☺️
Can you insert a led battery in the place where solar units are?
I just finished building the clear trans-am version of this kit last week! I tried the sword mode and it's been an absolute nightmare for posing.
May I ask what connector you used for the stand? I used the one included in the kit and it completely flops over when I try to pose it in the angles you're using.
Yeah the sword is just a bit too heavy. Picked up an Action Base 4 and used one of the 4 prong parts that go under the leg to hip connection. It's not perfect and likes to push the front skirt off but was suitable for the most part.
I have built the Master Grade Gundam 00 riser and I don't think it needs a 2.0. I haven't left in a pose where it's GN sword 3.0 has been left and erased striking pose for 4 years now and it hasn't moved and those four years. Now I think the ex-cia could probably use a 2.0 cuz that thing is a hand grenade you look at it the wrong way and it falls apart.
Didn't MG Exia, already have the Ignition mode?
sorry where do you get the red light from? it looks super cool!
Debating between getting the mg while its in stock, or waiting for the hg to get rereleased. I pose my kits often, so the weapons being lighter, the joints being easier to take apart and tighten, and the binders not having to be partsformed is what makes me lean towards the hg more, but im really not sure which i want more.
It's not terribly for posing in regular 00 mode but with the raiser you'll mostly need a stand for good posing. RG's a little better in that department but still gonna need a stand.
The mg actually has tight joints purposely to hold poses with the weapons.
@@jegt3382 yes but all kits get loose overtime. Its much harder to tighten joints in mg frames than it is to tighten hg joints imo.
I ended up ordering the mg anyways though
@@Furno52470 not all kits. I have some master grade kits that have gone lose over the years but I also have kits that has stayed solid even after almost a decade. The double 00 is surprisingly one of them. Though the kits I've got from 2017 reissues, those with blue logo, seem to have fix some joint problems. As for newer kits with ps plastic, I don't see them getting loose anytime soon. But ps plastic isn't as rock hard as abs plastic. They won't get loose but you still have to be careful not to break parts.
@@jegt3382built the mg like a year ago, I can confidently say that it has not held up. The hg is finally in stock again but I don’t want to spend $30 on such an old hg :,).
I got the No Grade 1/100 OO Raiser back when they were the first model kits available for OO Gundam. I've got to say, there is not a huge amount of difference between the no grade and MG in terms of looks, details, accessories and pose-ability. It even has the LED GN drives. Honestly it's like the No Grade was a beta test for the MG.
The OO is one of my favourite Gundams but I could never justify getting the MG with how close the No Grade comes to it especially given the fact that the No Grade was 1/2 the price of the MG.
what action base do you use?
Thie OO raiser to me is one of my holy grail kits and I was wondering...how did you managed to keep it so shiny? Throughout the the review it shined with lustre compared to mine. Did you perhaps used some sort of polishing material for it? Ive had mine for a year now and it still looks awesome
Probably used a flat coat top. I saw speed builders, spraying their model kits, after they built it
@@bagsikdangal thanks my guy, so far ive been using car care products like armor all or VS1 to give my kits the shine and luster but apparently they fade out overtime but the job of using it in cleaning them works too. Im a straight OOB kind of guy alo g with panel lining and decals wanting to try top coating looks easy
Haha we always try to leave the kits in as out of the box condition as possible, so this is right out of box with some stickers and panel lining. The lighting may make it looks a little glossier
I would like to add this mg to my collection, I only have exia and dynames, eventually want to get my hands on all the mg 00 suits, and this one looks gorgeous, but never liked how...toyish it looked due to the bright colours, bit of accent colours and maybe a darker blue would add more realism for me
I could see like a nice deep navy working really well to replace the blue on this kit. Maybe add some more red or orange accents here and there too.
@@thespicer ooo yes a deep navy blue would be good, with some lighter blue accents to make it pop, the orange is a good idea as well for some segments, I remember a white and orange test colour scheme for this suit, I think it was for a PG, that or white and red
@@seanwilliams5711 Yeahhhh, that orange test scheme is awesome! Mixing some ideas from that with the deeper colors would be stellar looking! If you end up doing it tag us so I can see it!
@@seanwilliams5711g inspection colors? that's the red/orange one
This Gundam kinds looks like a ninja with those swords...
I love this channel
I was able to put 5 green leds to this MG 00 Raiser. Granted I bought knock offs(since they're cheaper and better at lighting), it looks good with those green lights, coming out of MG 00 Raiser. Like I said, this MG is an led hog. But worth it. I also have the MG 00 7 Sword-G. Putting a 7 colored led in the GN Buster Sword, is funny and worth it.
Which led's did you go with? I've seen some on Amazon before but never really felt the need to pick them up.
The only 2.0 we need are EXIA tbh,the mg 00 variants are still ok for me
Exia MG needs a 2.0